Reviews
RCH-01
The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
I installed it in the CB 750
I have been replacing the Oil Filter every two Oil changes because it is air-cooled and has been for years and I want to drive it for a long time. Installation is easy. View detail
Better movement.
[How is it used?
I recently acquired a long-abandoned VTR1000SP2 from an acquaintance. Whenever I buy a used car, I replace the stem bearings, not only to improve handling, but also to return the car to standard condition.
Was the one you received as per Image?
The usual HondaOEM Parts arrived. There is no doubt about it.
How was your experience with it?
The movement is still better.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Stem bearings should be replaced because everything moves better. Although it is a troublesome process, it is more effective.
View detail
Refresh
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert it into the mounting hole of the Front Fender. A collar with a brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Rubber-based parts deteriorate, so it's a good idea to replace them periodically. They also protect the parts, so it is better to replace them before they stop functioning.
View detail
Securely mounted.
[How is it used?
The front suspension of a VTR1000SP-2 I recently purchased from an acquaintance was converted to an SC59 CBR1000RR. The front fender was forcibly installed from a VTR1000SP-2.
I bought this item to install a Front Fender for my SC59 CBR1000RR.
Was the one you received as per Image?
Insert the Grommet into the mounting hole of the Front Fender. The collar with the brim is then inserted and bolted to the front fender. The OEM parts are very well thought out.
How was your experience with it?
The usual HondaOEM Parts arrived. There is no doubt about it.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It feels good to properly combine and install these parts.
View detail
purchasing a spare part
When I changed the Mission oil, I replaced it with a new one and used the spare, so I had to repurchase it.
If the size is right, it doesn't have to be HondaOEM, but similar products are not that cheap, so I bought the same HondaOEM Product.
View detail
For CB250F
Earlier I encountered some noise in my bendset. After inserting this the sound went away. genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER PROTECTED RUBBER
This is used to protect the bend in case of any shock Genuine product -Rubber, FrontFender Mau 61103-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
For CB250F
Genuine product FuseF (10A)(MINI 98200-41000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER COLLAR
Genuine product - COLLAR, FR. FENDER 61104-357-000 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
CB250F MUFLER GASKETS
Genuine product -GASKET,EX. PIPE 18291-MN5-650 About quality and texture genuine product Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Good part
Original Honda part, of good quality, new. With a well-made finish. Manufactured to a high quality standard. Reliable, and of good durability. I recommend. View detail
Fits: HONDA CBR400 R, HONDA GOLD WING, HONDA VTR1000, HONDA NC750S, HONDA NC750X, HONDA NC700X, HONDA DN-01, HONDA NC700S, HONDA VT1300CX, HONDA SHADOW400, HONDA SHADOW600, HONDA CTX700, HONDA INTEGEA, HONDA FORZA, HONDA Silver wing400, HONDA VTX1800, HONDA VTX1300, HONDA GOLD WING F6B, HONDA CB1300SUPER BOLDOR, HONDA CB1300 SF
Excellent piece
Genuine Honda part, new, high quality. It has a great finish and is well made internally. Comes with original tag from the brand in question. Fits adequately to my motorcycle. Reliable part. I recommend. View detail
Valve assy, air injection for Honda shadow 750
Good morning. The part arrived in its original packaging, fits perfectly, made of high-quality materials. The installation went smoothly without any issues. Everything is fine, as always 5/5. View detail
Cover for honda shadow 750 phantom
Good morning. The cover arrived in its original packaging and fits perfectly on the motorcycle. The rubber isn't cracked, indicating it's made of good material. There were no issues with the installation. View detail
cheap
[How is it used?
Oil replacement once a year
How was your experience with it?
I don't have a measuring machine and I don't know what it feels like.
How did it compare to other products?
The appearance is like OEM is expensive.
Functionally, is the amount of Filter inside more than OEM? And?
Gold is inexpensive and the Brand is a classic, so I personally feel secure.
[Points to note]
I think it's about conformity caution.
View detail
DAYTONAOil Filter
I wanted to replace the oil and filter by myself, and after a lot of research, I found DAYTONA's products! I recommend it! View detail
Satisfied with the price, although it is higher than OEM.
Easy replacement and Torque management. View detail
Reliable
I have been using KIJIMA Oil Filter since my previous W800. This time I used 105-833 with Magnet for TriumphBONNEVILLET120. It is installed without any problem.
Always replace every 2 Oil changes.
Of course there is no OilTrouble, etc. I will probably continue to use it because of its excellent cost performance.
View detail
DAYTONA DAYTONA Oil Filter
The oil filter for PMC's short oil pan was discontinued, so I looked up where the OEM was and found out it was made by DAYTONA. I don't know the difference, but the price from PMC was 2000 yen and DAYTONA was 1115 yen, about half the price, so I think the cost performance was good. I will continue to purchase. View detail