Reviews
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
really best product
It's a really good product. It's a small change, but I really like it. Existing drawings were easily removed with air. It was easily replaced without a separate tool. However, it is white, so it is easy to see how dirty it is, but it is so pretty that it is forgiven. ------------------------------------------------------------ -------- It's a really good product. It's a small change, but it really changed. The existing paintings are easily removed by air. I easily replaced it without a separate tool, but it's white, so it's dirty to see it, but it's pretty. Powered by Google Translator View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
You are right to change it.
I have Large hands, so OEMGrip was too thin and made me tired. After changing to this product, I don't get tired even after riding for a long time. View detail
Fits: HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR
Replace with new one
Rear brake maintenance, disassembly for cleaning and reassembly, and replacement of the O-ring with a new one or else it may leak, so it is purchased and replaced.
It is helpful that the same products can be purchased at HondaOEM.
View detail
Fits: HONDA C125, HONDA C125, HONDA CB1100, HONDA CB1100N, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R
New installation
I purchased this caliper because I wanted to replace it with a new one when I disassemble and reassemble it for maintenance and cleaning of the rear caliper.
Material:Since it is a Rubber product, the installed product was old and deteriorated badly, so we were able to replace it with a new one.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
best choice
The same level of finish and temperature control as pure makes the user's hands comfortable. The best part is that there is no sense of alienation like pure love! It's very satisfying. View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
It's as good as I expected.
I have Large hands and the OEMGrip was too thin and very tiring, but this product has just the right grip. View detail
Fits: HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000, HONDA CRF1000A2, HONDA CRF1000A2, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D, HONDA CRF1000D2, HONDA CRF1000D2, HONDA CB1100F
Replace with new one
The rubber cushion attached to the fuel tank was deteriorated and had a crack in it, so it was replaced with a new one.
It was sold by OEM Parts, so I was able to exchange it for a new one.
View detail
Fits: HONDA CB750F, HONDA CBR600F3, HONDA CBR600F3, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CBR900RR, HONDA CT125, HONDA CT125, HONDA CT125, HONDA CT125, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500, HONDA CX500
Replace with new one
Spacer, the fuel tank fixing part, was old and discolored, so it was replaced with a new one.
I am happy with the new, clean look.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D, HONDA GL1800D
Replace with new one
The bag for the on-board tools was old and torn, so I replaced it with a new one. View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CBR650R, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL, HONDA CRF250RL
Replace with new one
GRUHelmet of Rear cowl claw insertion part of the Fuel Tank section was deteriorated and old, so it was purchased to replace it with a new one.
OEM Product, it is helpful to be able to purchase new products.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
Bleeder cover
Great product and quick delivery a pleasure to deal with, highly recommend. Great service from Webike Japan the product arrived to Australia in a few days, very happy! View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
A must-see for all vans fans!
I bought it because I fell in love with the design.
The texture of the Rubber is good, and the grip is thick and comfortable.
When fitting the handlebar, it is tight, so you may want to use parts cleaner or something similar to make it easier to slide on.
I put in my own G17Bond.
It would be good for street custom, big scooter, etc.
Not suitable for Off-road or Motocross.
I switched to AMAType L Throttle with it and it looks great.
View detail
Fits: HONDA CB750, HONDA CB750, HONDA CB750K, HONDA CB750K, HONDA CX500, HONDA CX500, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CRF150F AC, HONDA CRF150F A, HONDA CRF150F A, HONDA CRF150F A, HONDA CRF150F A, HONDA CRF150F A, HONDA CRF150F A, HONDA CRF150F A
Thank you WeBike!
Item is exactly as described and matches the part I took off my bike, arrived very fast and cheaper than all other options. I will be using WeBike again in the future thats for sure! View detail
Fits: HONDA XR250, HONDA XR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA VTR250, HONDA CX500, HONDA CX500, HONDA CB750L, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750F, HONDA CB750F, HONDA CB750, HONDA CB750, HONDA CB750
Thank you WeBike!
Item is exactly as described and matches the parst I took off my 1993 Honda Jade CB250F , arrived very fast and cheaper than all other options. I will be using WeBike again in the future thats for sure! View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
subtle
I used it on my DAYTONA air breeder, but it's too loose. I don't think it will come off while driving, but it's loose enough to prevent dust and dirt. The OEM breeder is not as loose as the DAYTONA, but it is looser than the OEM. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
Use with Ootani Coil
[How is it used?
Model used:FTR223
Applications:Street riding, Touring, Circuit
Period of use:About 3 years or so
Number of bottles used:About 4 Repeat purchases
Was the one you received as per Image?
As you can see in the image, the electrode is thicker than the one made by Denso, so I felt I could use it with the Votani Coil.
Was the installation difficult?
As long as you have a plug wrench, you should be able to do it without any problem if you are careful about the angle when tightening. There was no need to remove the tank.
How was your experience with it?
As mentioned in the Title, I will describe my impressions of using it with the Uotani Coil.
First of all, I was able to run with no trouble with the Utani Coil for the duration of its use. The electrode melted and I could not run. This was not the case.
The Iridium plugs themselves are good, as they are used in conjunction with the Utani Coil, but the start-up was very good, and the torque feeling was Large.
The Iridium plugs were excellent in terms of starting and torque, but once the electrodes got dirty from getting covered up, starting became extremely difficult, so I think the Standard Plug BP5HA would be a better choice for car bodies that use Watani Coil and tend to get covered up.
The Life had been replaced with a new one between 5,000km and 6,000km, as the Torque feeling changes after about 5,000km.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.
View detail
Fits: KAWASAKI KLE400, YAMAHA YF350E(QUAD), HONDA CB500F, YAMAHA YP250/S/A, YAMAHA YZF1000R/THUNDERACE, YAMAHA YFM350R(QUAD), YAMAHA YF400M-FW(QUAD), YAMAHA XZ550D, YAMAHA XZ400/D, YAMAHA XT250T, YAMAHA XT200, YAMAHA XT125, YAMAHA XS400SP, YAMAHA XS250/S, YAMAHA XS250SP, YAMAHA XJ400/D/SP/Z/Z-S/Z-E, YAMAHA WARRIOR YFM350X(QUAD), YAMAHA TW225/E, YAMAHA TW200, YAMAHA TW200E
Compared with NGKWindshield IRIDIUM
[How is it used?
Model used:FTR223
Traveling:Street riding, Touring
Period of use:About a year or so (Replace after about 5000 to 6000km.)
Was the one you received as per Image?
Image is correct. I'm glad I bought one made by Denso because the construction of each part is excellent.
Was the installation difficult?
If you have a plug wrench, you can do it without any problem as long as you take care of the angle when tightening the plug, but since the FTR is located quite far back in the plug, it is better to remove the plug cap and then air blow to remove any accumulated sand and small stones.
No need to remove the Tank.
How was your experience with it?
As mentioned in the title, when compared to NGK Windshield IRIDIUM, the ignition enhancement Custom (Equipped with Uotani Coil) I think this product was better in terms of starting and torque feeling when I was not using the
The Life of the Plug itself was the same for both.
The price of this product is higher, so if you think that you should spend money on a plug that needs to be replaced, even if it is a custom part, do not choose this product. The price is higher than this product.
I didn't want to use it with the Utani Coil because I didn't want to have any problems with the thin electrodes due to the characteristics of this product.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Very good, heats up fast
The shape is completely consistent with the original car, the heating speed is fast, and the cost performance is high. It is worth recommending. The installation needs to find an experienced car dealer, pay attention to the power, the fuse should be above 5A --------------------------------- ------------------------- The shape is completely consistent with the original car, the heating speed is very fast, the price is high, it is recommended . Installation needs to find experienced cars, pay attention to power, fuses are more than 5A View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Warm Psycho
I got my first motorcycle in my life, a TENERE 700, and started riding it with FloatFloat, but the season was autumn. The season was autumn, and I soon faced the cold.
Road motorcycle (The bike) I've been riding for more than 10 years and I've never had cold hands even in the middle of winter, but the Speed with Engine is different. And since I don't exercise myself, my body doesn't warm up and I'm losing heat, so I'm cold! My hands are cold!
I thought this was too much, so I did some research and came across Grip heater. Since I'm a novice, I thought I'd ask a store to install it for me. Just connect to the Coupler for the OEM Grip heater and you're good to go." I found some information on the Net and tried to do it myself.
However, I'm such a beginner that I bought my first Electric Works Pliers for this purpose. At first, I didn't even know how to connect the GH-10 wires to the Coupler of the OEM Grip heater. After a lot of research, I found out that the coupler was the MT090 type, so I went to Nirinkan and found that they sold that decidedly, so I just bought it and connected the terminals to the GH-10 wires. (Maybe I should really just buy the terminals from Rose, but I'm not sure.)
The Accelerator Wire has three different types of winders that were included in the package. "Type D." I chose the one called (That seemed to be the closest form of Standard Product.) After that, I tied the extra long cable around the head pipe and finished it. It took me a whole day, but if you're familiar with it, it may take you less than an hour.
The Grip heater, which I was able to install safely after much effort, is already a Psycho. My hands were warm even when the temperature was about 3 degrees Celsius around Lake Miyagase. When I get on the highway in such cold weather, the back of my hands feel cold, but the warmth of my palms makes all the difference. Comfortable.
As advertised, it is as thick as the OEM Grip, and the grip is so comfortable that I can't imagine my motorcycle without it.
One thing that I thought was a little bit of a mistake was the position of the switch on the LeftGrip, which was placed alongside the switch on the Blinker. So when I operate the Blinker, I unintentionally press the switch for the Grip heater, and before I know it, the Grip heater is sometimes turned off. At first, I thought it might have stopped automatically due to lack of voltage, but it seems that Lamp blinks when it does, so I think I'm accidentally turning it off.
Well, this is not a problem with the product, but the way it is installed, so I will try to adjust it soon.
View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
It's warm
I installed it in Z900RS Cafe
The OEM Grip of the Clutch Side is removed for the time being, and this product is given up because it is too tight though it tries to insert it temporarily.
I had no choice but to cut the Handlebar down a little and install it.
AxelThrottle side can be installed without modification.
Wiring is DAYTONA's Attachment Power Supply Unit D-UNIT (D-Unit) so I changed the tip to Bullet Terminal and connected it.
The claimed Grip thickness is not uncomfortable at all and is great.
If the temperature was about 10 degrees Celsius, it was Large sturdy without setting it to the maximum temperature (of course, the back side of the hand is cold).
The Z900RSOEMHandlebar is the 130mm one.
View detail