Reviews
Fits: YAMAHA YZ125X, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ426F, YAMAHA YZ450F, YAMAHA YZ80, YAMAHA YZ85
It may be a classic.
I bought this one because a certain lever that does not break interferes with the CloseHand guard on a 4Finger. If you care about the appearance, you should choose the cut-out type, but if you don't want it to break during the race, you should choose the Forged Type.
The exterior is of high quality, as one would expect from Zita. Installation is a simple and easy process. Adjustment is stepless, but requires a tool, so it is a little troublesome.
I have fallen a few times since installation and have not had any breakage or other troubles.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ400F, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ250FX
Easy to apply Decal without YAMAHA's stamp
When applying Decal, OEMGuard has a raised YAMAHA imprint, and I bought it because I thought Decal would peel off easily.
It looks good, installs well, and is durable enough when used. No complaints, no excessive interference with the Fork outerTube, and the Decal was easy to put up.
View detail
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
I don't know.
We used Brembo for the front calipers this time.
The caliper recommendation was 15RCS, so I put it on my Grom, and the brake touch is totally different compared to the stock one.
I've been riding my CB250R and getting more and more hits, and the front brake is working better and better.
I don't feel like it's direct. Well, I've never ridden a bike with ABS before.
I knew what to expect.
It felt like the 15RCS recommended master cylinder when I gripped it.
I was tempted to put on 16RCS and compare. Sweat.
It's expensive, so I can't just change it at a moment's notice.
View detail
I should have bought it earlier.
Clutch control is very easy, and above all, the in-gear kick is almost a one-shot instruction!
I would definitely recommend anyone doing HED with 250X!
View detail
Fits: YAMAHA YZ125, YAMAHA YZF250, YAMAHA YZF450 10-16, YAMAHA YZ250 15-16
Firmly fixable
I purchased this product to renew my Number Seal.
The lower part is fixed to the fork, and the upper part is fixed to the screw and tie wrap, so it can be used as it looks.
I don't mind it because I use it for competitions, but if you are a city rider, you may be dissatisfied with the price because there were some parts that had a little bit of bali.
The sticker is a small manufacturer's logo and is included in the package,
The Fork fixing part was a Spec. that was attached from the beginning.
View detail
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
it works.Never seen such a strong spark
I've run NGK in all of my bikes for years and never have had any issues and definitely get great performance. I won't run anything else in my bikes and have never experienced failure from them. If they are changed at their recommended interval or even a little early you'll be hard pressed to find anything better. Always be sure to set your gap for what your machine manufacturer recommends and you'll be in great shape.There are NGK fake spark plugs on the market. You need to be careful.Buy from Webike or distributors. View detail
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
TZr50R Oil Filler Cap O-ring
[How is it used?
Used for EngineO/H of YAMAHA/TZr50R.
This item is an O-ring of Oil Filler Cap.
It is not a part that needs to be replaced, but we replaced it because it was a good opportunity to do so.
How was your experience with it?
OEM parts are the only choice for engine parts. There is no problem with quality.
I compared it with the old O-ring, but the old one was still hardened.
Oil does not leak from this area, but does it affect the pressure application?
How did it compare to other products?
There is no Other Brand Product, so there is no comparison. Even if there were, OEM would be the only choice.
[Points to note]
I installed it while taking care not to twist it during installation.
Grease is also applied just in case.
View detail
I'm too weak.
It was distorted when I fell and hit it.
With OEM, this didn't happen even if you hit it hard..,
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA WR250F (WR250FS), YAMAHA WR450F (WR450FS), YAMAHA YZ450F (YZ450FS)
Genuine Yamaha Left Side Swingarm Cover for YZ125 2004
This bike came in with a lot of issue and a lot of smll niggly parts that needed replacing. The swingarm cover on the left hand side was completely missing for some reason or another. Might as well just buy a new one which will help protect the pivot bolt nut on this side. I also needed to get the right hand side as this was also missing too. I did have a couple of other parts for this bike in the order so I got them all shipped together to save on a bit of cost. I generally use EMS as they just get the job done fast. In 5 days my order was at my door and was all presented in perfect condition. The packaging was excellent as always with Webike. The cover came in the regular Yamaha packet and was just as expected. It is made from a plastic kind of material and was a moulded part. Makes sense really. It is basically a dust cover to protect the nut on the pivot shaft. Obviously, as this is an off road bike, you do get a lot of dirt that could easily make its way in there and cause some issues. Fitting it just a push on and that's it. A nice snug fit and hopefully, this will stay in situ for a long time to come. Overall, very happy with this purchase. View detail
Genuine Yamaha Right Side Swingarm Cover for YZ125 2004
This was a replacement for a totally missing right side swingarm pivot head from the YZ125 that came in to the garage. I also had to replace the left side as that was also missing. No idea how they were lost but they were certainly not there. Finding the right covers was pretty straight forward by checking Yamaha schematics. The price was great and this made me very happy. With a few other small parts, my order was shipped with EMS and as usual, it arrived at my door in 5 days straight. Everything in the order was packaged very well and no damage during transit. The cover is a moulded one made from what looks and feels like a plastic composite. It is a very hard surface but that is a good thing. It is just a boot that goes over the pivot head and protects this from rocks and debris which swould hinder the removal onf the pivot. Fitting was just a push on cover and was very secure as I did try and prise it back off but it was well on there. Nice little job that made a good difference. Thanks Webike, nice one View detail
Fits: YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ125, YAMAHA YZ250
In preparation for
Quantity to add Bar End:Exchange in Set
The Bar End for the Close type used in the past is said to have been discontinued, and the Open endSpec. Bar End was purchased.
There is no particular change in the feel of the Teflon treatment, but it is a good idea to have multiple Teflon coated parts because they are easily damaged in the event of a fall or other accident.
The price is also relatively inexpensive.
View detail
Z -WHEEL Aluminum nipples kx250 Front
Cost performance is better than OEM.
Nipple head (Rim side) is huge, so
Large amount of pop out from Rim
When installing the Tire, the BEET was not falling enough.
Tire is a little hard to fit
View detail
Genuine DID Spare Chain Link
I was in need of a few spares for various chains I have in stock and this 520 DZ2 was one of those I stock but have no other spare links. I find it is always good to have spares in stock as even though the original chains do come with a link like this, occasionally they do get damaged and then you are stuck. Finding the right chain link was easy as I just checked down Webike's inventory for the one I wanted. The price Webike have these for is brilliant and better than I could source locally. I did order quite a few different types of chain links as I do stock a lot of various chains anyway. As these were all being shipped together, this also saved on a little postage cost. EMS got my order delivered in 5 days from being shipped. This chain link spare came in a nice DID packaging and was well presented. It came with multiple o-rings and a squish pack of white grease. You can never have enough of that anyway. The chain link is very well made as with all DID chains etc. A nice little stock up is what was needed and I am reassured that I now have spares in case I need them. Thanks Webike. View detail
Fits: HONDA CRF450R, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA YZ125X, YAMAHA YZ250X, YAMAHA YZ250FX, YAMAHA YZ450FX, KAWASAKI KX450F
Required equipment for YZ
CYCRA Disc Covers and Quantities:Used in Set.
YZ is required for Enduro because of the weakness of the thinness of the Front fork abyss
Fixation is done by biting into the hollow of the Fork, then occupying the Screw to fix the Quantity:Pair (for Left and Right) The method is to spread out the screw to the "smallest" possible size, but this screw is a tricky one and very small.
Licking is very difficult to remove.
When removing the Screw, even if it is a hassle, it is necessary to clean the area around the Screw and make sure that the Wrench can be inserted securely.
Size-wise, it is unavoidable, but this is the only point to note.
View detail
Fits: YAMAHA YZ450F, YAMAHA YZ250X, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ125, YAMAHA WR450F, YAMAHA WR250F
You can't go wrong if you choose this one.
Guard focused solely on disc protection
I tried to use a disk guard to protect the fork bottom when I renewed my vehicle, but due to the difficulty of installation and accuracy, I returned to this one that I had used before.
Refreshing around the disc and fork bottom by inserting the Mount instead of the Brake Side Collar and fixing it in place.
Refreshing condition is good because it is a place that gets covered with mud and it is hard to clog up with mud.
View detail
Genuine Yamaha Front Wheel Oil Seal for WF450F 2017
This was the oil seal for the front wheel on the WRF450F which needed new wheel bearings. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 5 days from being shipped. The oil seals came in th standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View detail