Reviews
Fits: YAMAHA TRICKER, YAMAHA SEROW250, YAMAHA XT250, YAMAHA SEROW225WE, YAMAHA SEROW225WE, YAMAHA SEROW225W
Lighter than OEM!
The OEMSprocket had reached the end of its life span and was replaced with a DRC Sprocket.
Compared to the OEM, the same iron material is made lighter by cutting out the wall, etc. Although it is not as light as aluminum, it is still clearly lighter.
We will see how long it lasts, but I think we can expect it to last because it is made of iron. The cost performance is not bad.
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
I'm feeling better.
It now runs powerfully from low RPM to high RPM, I am very satisfied. View detail
Fits: YAMAHA XT600E, YAMAHA XT400, YAMAHA XS400, YAMAHA YZ80, YAMAHA YZ80, YAMAHA YZ125, YAMAHA XJ650, YAMAHA XJ650, YAMAHA XJ400, YAMAHA XJ400, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT125R, YAMAHA DT200R, YAMAHA DT125R, YAMAHA XJ750E, YAMAHA MAJESTY250(SG03J), YAMAHA BRONCO, YAMAHA TY250Z TY250
No problem
[How is it used?
TZr250R (3XV) I was concerned that the Clutch lever of the "Mere Old Man" was slightly bent from the time of purchase.
I thought that any Universal Product that fits Yamaha vehicles would be fine, but I chose this product because it is guaranteed to fit.
Was the one you received as per Image?
It was just like the picture.
Logoetc. was not included.
Was the installation difficult?
If you have some Motorcycle maintenance skills, you should be able to replace it in 5 minutes.
There were no problems at all with accuracy or installation.
How was your experience with it?
I didn't want it to be hard to grip, but it was no problem.
I have been able to use it without much discomfort from OEM.
If I had my wish, I thought it would be better to have a little more R on Lever for better finger contact.
I am satisfied with the product without any wobble.
[Included Parts:were they on?
Since this is LeverBody only, Bolt and Nut must be used with it.
【Review】
I was able to use it without any problems in terms of accuracy and quality.
It is inexpensive and a good idea to have it as a spare in case of emergency.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Torque up！
I had Windshield IRIDIUM on my 2nd Off, and at this point I felt that the low speed Torque had increased. I also added this product, and it seems to have increased the Torque even more. I think this product may have changed the whole area.
I would recommend this for a 2nd st with no low speeds!
As a side note, I've read on the Net that Windshield IRIDIUMs on the 2nd st. are prone to failure, but I'm detaLame. I have already used it for more than 3000 km on forest roads, and there is no problem at all. However, the tip of the wheel seems to be worn out, so I may have to replace it soon.
View detail
Fits: Others , HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA PCX160, SUZUKI GN125-2F, YAMAHA YB125SP, YAMAHA XTZ125, KAWASAKI KLX125, KAWASAKI D-TRACKER125, KAWASAKI Z125PRO, KAWASAKI KSR110PRO, KAWASAKI KSR110, YAMAHA XT250SEROW, HONDA CRF250L, HONDA CRF250RALLY, HONDA Dunk, HONDA MAGNA50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA APE100 TypeD
Helmet holder
The installation was easy, the texture is good, and I am satisfied with the Large change. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
What is a compliant product (philosophy)
It was purchased for use on the XSR900, but was not used in the end, and the STD Mounted Product Grip was taken and used.
Reasons for not using it include
Length is 5mm shorter than OEM Product
There is a non-slip rib that OEMs don't have.
Certainly, even if it is 5mm shorter, it would be possible to use it if the inner diameter and Wire fixing part are the same Size.
Also, Grip will probably go in even if there is some Rib to prevent slipping.
The Instruction Manual also lists the XSR900 as a compatible model, but it clearly states that some models require modifications, etc.
The Manufacturer is not at fault, as even the actual photo is posted and shows the length and rib properly.
It is easy to assume that they are exactly the same shape as compliant products.
Usable = Compatible
Should we consider this?
It is quite a philosophical piece.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Purchased for MACH
Installed because I had purchased it before and had confidence in it.
I know not many people will be able to experience it, but it's nice to see the day flying so visibly stronger.
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
The fire jumps stronger.
As you can see by checking the fire jump, it will clearly glow brighter and stronger!
Idling is also pleasantly stable.
It's such a good product to buy….
View detail
Fits: YAMAHA XT250X, YAMAHA WR250X, YAMAHA WR250R, YAMAHA XT250, YAMAHA SEROW250, YAMAHA TRICKER
Might be a little expensive…
Side Stand End gets scratched easily, so I wish the price would go down, even if it's not that great!
When I put it on SEROW, I personally would like a little more height.
I had Bolt in from the back and the top was fastened with Cap Nut.
I think SEROW often parks on uneven ground, so it's a RECOMMENDATION!
View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, HONDA CB250RS, HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F
It chose by appearance. A portion black when grasping is collapse.
It chose by appearance.
A portion black when grasping is collapse.
View detail
Fits: YAMAHA TW225, YAMAHA TW200, YAMAHA DT230LANZA, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200, YAMAHA BRONCO, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA XT250, YAMAHA XT125, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R
More than you can imagine.
It was shorter than I had imagined.
Just fine to use for appearance issues.
View detail
Fits: YAMAHA XT250 X 5C11-3 FNo: DG11J, YAMAHA TW225 E 5VC1-7 FNo: DG09J, YAMAHA TW200 5LB1-2 FNo: DG07J, YAMAHA TW200 5LB1-2 FNo: 2JL, YAMAHA TW200 4CS1-6 FNo: DG07J, YAMAHA TW200 4CS1-6 FNo: 2JL, YAMAHA TW200 2JL FNo: DG07J, YAMAHA TW200 2JL FNo: 2JL, YAMAHA SRX600 3SX1 FNo: 3SX, YAMAHA SRX400 3VN1-5 FNo: 3VN, YAMAHA SRX400 3VN1-5 FNo: 1JL, YAMAHA SRX400 3HU1 FNo: 3VN, YAMAHA SRX400 3HU1 FNo: 1JL, YAMAHA SRX400 2NY FNo: 3VN, YAMAHA SRX400 2NY FNo: 1JL, YAMAHA SR500 3GW1-9 FNo: 1JN, YAMAHA SR400 3HTA-W FNo: 1JRH03J, YAMAHA SR400 3HTA-W FNo: 1JRH01J, YAMAHA SR400 3HTA-W FNo: 1JR, YAMAHA SR400 3HT1-9 FNo: 1JRH03J
Replace it every time because it's inexpensive.
Replace it with a new one every time to prevent oil leakage. View detail
Fits: YAMAHA FZR400, YAMAHA TDM850, YAMAHA FZR400, YAMAHA SRX600, YAMAHA TT-R250, YAMAHA TT250, YAMAHA T225, YAMAHA TW225E, YAMAHA TW200, YAMAHA XV250 Route 66, YAMAHA FZR400RR, YAMAHA XJ400S, YAMAHA XJ400L, YAMAHA XJ600S, YAMAHA FZR600R, YAMAHA RZV500, YAMAHA XTZ750, YAMAHA SRX400, YAMAHA RZ250R, YAMAHA FZX250 ZEAL250
At R1-Z
It was used as a thermal countermeasure product for R1-Z.
The mounting pitch did not fit even after shaving and could not be installed with two screws, so it was fixed with one screw.
Coupler's Flat Terminal was also slightly thinner than the OEM one, and the couplers were not inserted properly.
I have reworked it.
I think heat dissipation is improved.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
You are right to change it.
The product is as good as I imagined. I like it because it is the part I touch the most. View detail
Fits: SUZUKI DRZ400SM, SUZUKI DRZ400S, KAWASAKI VERSYS-X300, KAWASAKI KLX230, YAMAHA XT250, HONDA XR250MOTARD, HONDA XR230MOTARD, SUZUKI LT-Z250, SUZUKI LT-Z400Z, SUZUKI LT-Z400, SUZUKI LT-R450, SUZUKI DR200S, SUZUKI 250SB, SUZUKI DJEBEL250XC, SUZUKI DR250R, SUZUKI RMX250S, KAWASAKI KFX700, KAWASAKI KFX450R, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X250
Simple and cool.
It used to be just... "Z" I was using a Mark-only lid, but I found this one and replaced it as soon as I found it. The design looks good on any car model. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
The Engine was not sputtering very well.
The Engine was not sputtering very well.
Ignition coil was replaced at the same time.
It had been about 10 years.
The Engine malfunction did not improve, but
I am satisfied with the dress-up effect.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
You are right to change it.
I have Large hands, so OEMGrip was too thin and made me tired. After changing to this product, I don't get tired even after riding for a long time. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
NGK power cable
I bought it for a stable supply of electricity while doing 115CC BOREUP. I can understand why many people are looking for it. I think it is a really good item because it can even be thought of as a red dress-up. CF POSH: I use it in combination with Racing IG Coil --- ------------------------------------------------------------ ----- 115cc boreup I bought it for a stable electricity supply. I think it's a good item because I can think of a lot of people looking for a lot of people. Powered by Google Translator View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
It's as good as I expected.
I have Large hands and the OEMGrip was too thin and very tiring, but this product has just the right grip. View detail
Fits: YAMAHA MAJESTY250, YAMAHA serow250 s, YAMAHA SEROW250 X, YAMAHA SEROW250 X, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA XG250 S, YAMAHA XG250, YAMAHA XG250, YAMAHA XT250, YAMAHA XT250S SEROW, YAMAHA XT250X, YAMAHA YZ250F
I recommend.
Packaging is good. I think It will work effectively such as Yamaha OEM oil filter. This daytona oil filter is very affordable. It's reasonable price. View detail