Reviews
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
It is said that the size is just right for a grom. If you don`t put a top case on it
I bought the M Size after reading the impressions that it was just right for the Grom, but I had forgotten about the Top case.
It is not impossible to use it, but I regret that I should have chosen a Large size.
I think the quality is good
View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, SUZUKI VX800, SUZUKI TS200R, SUZUKI TS125R, SUZUKI SV400, SUZUKI RMX250S, SUZUKI RMX250, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GS400E, SUZUKI GS125E Katana, SUZUKI GS125, SUZUKI DR250S
MASTER change for DIO-ZX
Around the Front of DIO-ZX on AF24TACT
MASTER here while swapping.
Version up to Cylinder.
I don't know how to Brake in NORMAL condition.
Comparison of BrakeControl and effectiveness
I can't do it, but it looks like Race ish.
I like it very much
Air bleed is a pain in the ass when it comes to installation.
It's not particularly difficult, but it's about as difficult as it gets.
Cowl must be cut to fit on AF24TACT.
It cannot be installed.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X LD, HONDA NC750X, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
Stays firmly in place
I replaced the previous pad because it was impossibly low. It stops well for city driving. View detail
Fits: HONDA Forza(MF10), SUZUKI ADDRESSV125, HONDA FORZA Z ABS, HONDA FORZA Z, HONDA FORZA Z, HONDA FORZA Z, HONDA PCX150, HONDA PCX125, HONDA PCX150, HONDA PCX125, HONDA PCX125, HONDA FORZA Z ABS, HONDA FORZA Z ABS, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Easy angle change
The number angle of the latest Fender Eliminator Kit is a little bit docile. The angle of my Motorcycle was not enough, so I used this parts to adjust the angle.
They are easily detachable, so they can be adapted to TPO.
It is easy and good IdeasParts.
View detail
Fits: YAMAHA BirdCity155, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA MAJESTYS, YAMAHA MAJESTYS, YAMAHA XForce, YAMAHA BirdCity125, YAMAHA BirdCity125, YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA BWS125, YAMAHA JOG125, YAMAHA BWS125, YAMAHA AxisZ, YAMAHA AxisZ, YAMAHA Axis Treat, YAMAHA CYGNUS Gryphus
08 se44j
Installed on an 08 CYGNUS X. I didn't replace the Slider the last time I replaced the Weight Roller, so I'm replacing it now that it has 30000Km on it.
When the crank case cover is removed, there are black dusts, so blow it off with air and clean it with parts cleaner before starting the work.
I disassembled the primary and blew it down with air and cleaned it with Parts Cleaner before replacing it. (45NmClutch60Nm)
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: KAWASAKI KSR-I, KAWASAKI KSR-II, KAWASAKI KS-II, KAWASAKI KSR-110, KAWASAKI Z125PRO, SUZUKI LETS II-S, SUZUKI SEPIA ZZ, SUZUKI SEPIA RS, SUZUKI ShotS, SUZUKI Address Tune, SUZUKI AddressVTune, SUZUKI ADDRESS V50, SUZUKI Address50, SUZUKI ZZ, SUZUKI HI-UPR, SUZUKI GAG, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS110, SUZUKI ADDRESS110
Large satisfied
It is quite solidly made and I am satisfied with Large!
Just size for Z125PRO as well.
Heat Insulating Material that can be affixed to the Exhaust System portion and
Don't let it flap in the wind.
I also like that it comes with a Belt!
View detail
Fits: KAWASAKI VN800, KAWASAKI VN800 Classic, PIAGGIO Liberty 125, YAMAHA TMAX, APRILIA Pegaso 650 Strada, APRILIA Pegaso 650 Strada TRAIL, APRILIA Pegaso 650 Strada TRAIL Factory, DERBI Murasen 659, ITALJET Torpedo 125, KAWASAKI Epsilon 150, KAWASAKI Eliminator 125, KAWASAKI Balkan, KAWASAKI Vulcan 400 Classic, KAWASAKI Vulcan 400 Drifter, KAWASAKI Vulcan 800, KAWASAKI Vulcan 800 Classic, KAWASAKI Vulcan 800 Drifter, KAWASAKI Vulcan II, PGO G-MAX125, PGO G-MAX200
Necessary and sufficient!
Used on a SUZUKI INTRUDER250.
The oil had not been ridden for a while, so it was replaced while performing maintenance such as oil replacement.
I don't need an expensive plug because I drive Main on the street, and the Standard Plug BP5HA is sufficient for me.
In a good sense, it's neither too good nor too bad, and it's safe to use.
View detail
Fits: HONDA VTR250, HONDA FTR223, HONDA FTR223, HONDA CB650R, HONDA CB400SS, HONDA CB223S, HONDA 400X, HONDA CB150R, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA Rebel300, YAMAHA MT03, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA MT-25, YAMAHA NMAX, YAMAHA MT-07, YAMAHA MT-09, HONDA MAGNA(V-TWIN MAGNA)
Mounted on ADV160
I put it on my ADV160 to attach ActionCamera.
I chose the Mirror mount to avoid the screen. I have used it on other cars and think it is the most universal.
Both quality and texture are perfect considering the price.
View detail
Fits: HONDA CBR650R, HONDA CB650R, KAWASAKI KLX250, KAWASAKI ER-6, KAWASAKI ER-4n, HONDA MONKEY, HONDA ZOOMER, HONDA XV1000V, HONDA XR50 MOTARD, HONDA XLR250R, HONDA XLR250BAJA, HONDA X4, HONDA VTR1000F, HONDA SL230, HONDA PCX, HONDA PCX150, KAWASAKI ZXR750, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900
For a casual dress-up
The Red color, which is the same color as the Motorcycle, was installed.
The texture is very good
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA MAJESTYS, YAMAHA NMAX, YAMAHA NMAX155
Installed on YAMAHA WR125R
Installed on YAMAHA WR125R.
The Regulator broke a while ago, so I replaced it, including prevention.
The work is easy because the structure is simple, although the seat and covers have to be removed.
It is a little larger than OEM, but it will fit without any problem.
I use it for CROSSCUB110 and ADV160, so I have the same impression, but I think the starting performance has improved.
View detail
Fits: HONDA NSF100, SUZUKI VOLTY, YAMAHA RZ125, YAMAHA XT660X, YAMAHA CYGNUS X SR, SUZUKI COBRA, YAMAHA TZR50, YAMAHA TT250R RAID, KAWASAKI GPZ400S, KAWASAKI KH250, SUZUKI RG200, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI SV400, SUZUKI TS125R, SUZUKI TS200R, SUZUKI VX800, SUZUKI Across, SUZUKI GS400E, SUZUKI GSX250S KATANA
NisshinRetro Brake Master CylinderKit
[How is it used?
Used for KawasakiDouble400
Was the one you received as per Image?
Yes
Was the installation difficult?
It is not difficult, but it does take a little getting used to bleed air out of Brake fluid.
How was your experience with it?
Round Type Cylinder matches NEO CLASSIC Double and is satisfied with Large change.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No
Other items that would be helpful
nothing special
View detail
Fits: YAMAHA Cygnus X, YAMAHA Cygnus X, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Good looking.
The mileage exceeded 4,000 km, and after overhauling the car, I decided to change the wire and hose of the brake! I decided to change the Wire and Hose of the Brakes.
Although changing to this mesh hose does not improve the braking power of the brake by a large margin, it is good for self-satisfaction. It also improves the appearance.
View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
disappointed
I searched for parts from the car model on our site and purchased them, but could not install them. Crying I thought I could install it without any modification since I searched for parts by car model, but I am disappointed... View detail
Fits: SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA XR250, HONDA CR125, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), SUZUKI street magic, SUZUKI Jebel 250XC, SUZUKI Jebel 200, SUZUKI Glass Tracker Big Boy
Cosmo!
I bought it immediately because of its affordable price.
The grip was also nice!
View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CB400F, HONDA NC750X, HONDA NC750S, HONDA NC750X LD, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Version R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R, HONDA CBR250R, HONDA CBR250RRR
The classic Red Pad
The standard Red Pad.
When I tried the Oil cooler on, the Hose came loose and hung over the Caliper and the Pad sucked the Oil.
I immediately tried to degrease it with PartsCleaner, but it still became a GarbagePad that did not work so well that it was no longer usable.
Therefore, Rotor was also degreased and a new Pad was installed.
After all, it works better.
Be careful not to get oil on it.
I'm converting an XR400 Motard Brake to an XR250, so the Pad part number is not helpful, though.
View detail
Fits: YAMAHA Cygnus X SR, YAMAHA XT660X, YAMAHA TZR50, YAMAHA TT250R Raid, YAMAHA RZ125, SUZUKI volty, SUZUKI cobra, SUZUKI Across, HONDA XR230, HONDA XR250, SUZUKI VX800, HONDA SL230, HONDA PCX150, HONDA PCX125, HONDA NSR80, HONDA NSR50, HONDA NSR250R, HONDA NSF100, HONDA NS50F, HONDA MBX80 Integra
Wow that's cool
Maybe it's because I'm an amateur, but Touch is just a little easier to understand. View detail
Fits: HONDA CBR400R, HONDA 400X, HONDA CB400F, HONDA NC750X, HONDA NC750S, HONDA NC750X LD, HONDA 400X, HONDA CB-1, HONDA CB250F, HONDA CB250F, HONDA CB400F, HONDA CB400FOUR, HONDA CB400SF, HONDA CB400SF Version R, HONDA CB400SS, HONDA CB750, HONDA CBF600S, HONDA CBR250R, HONDA CBR250R, HONDA CBR250RRR
Customized
Brake braking force is a little higher, and the control performance is higher for touring use. View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, HYOSUNG RX 450 SM, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 401, HUSQVARNA VITPILEN 701, HUSQVARNA TR650 TERRA, HUSQVARNA TR650 STRADA, HUSQVARNA TE250, HUSQVARNA TE 510, HUSQVARNA TE 510 CENTENNIAL, HUSQVARNA TC250, HUSQVARNA TC250, HUSQVARNA TC 510, HUSQVARNA SVARTPILEN 701, HUSQVARNA SMR 630, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 510R
I am satisfied with the product. (Failed in Spring Sale lol) )
Yaay! If you buy in the afternoon on 3/24, 3,198 yen became 2,962 yen with the Spring Sale, or you bought in the morning! (Lol)
I replaced the front brake pads and now it stops when I snap it, so I'm going to replace the rear brake pads with new ones.
Pull the clamping shaft out to the back, pull the old one out to the front and frame the new one….
Hmmm, it won't fit… I have to push the pot in because it's thicker.
Disc Brake Piston Tools
https://www.webike.net/sd/20205012/
Press back against the
I'm not sure if it's time for an overhaul.
But I thought the exchange was over.
It was originally scuffed up with air biting and completely scuffed up. So, I connected DrainPipe and used a syringe type
https://www.webike.net/sd/1647527/
I did air ejection, but the Brake pedal is too skunky and Fluid is not coming out.
I might be able to get a better one with a Small Type Vacuum pump, but it won't be ready today or tomorrow, and I can't be sure.
I can't help myself today, so that's it.
The next day, I went to Red Baron in Asaichi! (Lol)
I'll write the full story in the shoppreview. (Lol)
View detail
Fits: KAWASAKI VN800, KAWASAKI VN800 Classic, PIAGGIO Liberty 125, YAMAHA TMAX, APRILIA Pegaso 650 Strada, APRILIA Pegaso 650 Strada TRAIL, APRILIA Pegaso 650 Strada TRAIL Factory, DERBI Murasen 659, ITALJET Torpedo 125, KAWASAKI Epsilon 150, KAWASAKI Eliminator 125, KAWASAKI Balkan, KAWASAKI Vulcan 400 Classic, KAWASAKI Vulcan 400 Drifter, KAWASAKI Vulcan 800, KAWASAKI Vulcan 800 Classic, KAWASAKI Vulcan 800 Drifter, KAWASAKI Vulcan II, PGO G-MAX125, PGO G-MAX200
This is it.
I have also tried Windshield IRIDIUM, but nothing has changed in terms of starting, fuel economy, power, longevity, etc.
Does this mean that this Standard Plug BP5HA is comparable in performance to Windshield IRIDIUM?
View detail