r15m Oil Element

It is easy to install. I would ask for it again. View detail

Trust Brand

I replaced it along with the Plug cord.
Consumables are regularly replaced. View detail

It will be Accent around the Engine.

There are many similar filler caps available from other manufacturers, but YOSHIMURA's logo is the one point of satisfaction.
I am not sure about the durability, but the cutting accuracy of the screw threads is good and I have no complaints. I think it is a good product. View detail

It's nice and easy to ride!

I installed it on my WR250R
I have been doing both off-road racing and city driving, so I had an OEM 13 front sprocket, but I decided not to do off-road racing, so I bought a 14T to increase the size to a higher speed.
As for Merit...
No more need for busy SHIFT UP when sending outgoing messages.
Maximum Speed Up

Demerit is
Increased Downshift in traffic jams and on steep uphill slopes.
I think this is about it for Demerit.

As a result, I am happy with the change because I am riding comfortably. View detail

Grip force is increased and can be felt even in city driving.

[How is it used?
I bought this seat as a for re-covering because the normal seat for WR250R that I bought used was not in good condition.
The vehicle itself was also purchased used, but the Seat is a SPIRAL Complete Seat, the same as the Seat cover I purchased this time. With Stages Seat I found it difficult to use, so I bought a second-hand Normal seat.
I had already heard that someone I know uses this product and had heard reviews that the grip of the Seat Cover is good and easy to use, so I had no hesitation in purchasing it.
How did you like it?
As Mr. Manufacturer claims.
The original non-slip material is used, which is more grippy and durable than the existing Seat cover in a larger width.
Different materials are used for the top and sides of the cover, allowing for excellent machine control. As it says, it grips firmly when riding and improves the hold of the vehicle body.
My personal driving skills are low and I only play with low specifications for walking on forest roads and playing in the mountains, but the Seat's grippy feel is dependable, and I expect the Seat fabric is thicker and more durable than the OEMSeat Cover.
How did it compare to other products?
I can only make subtle comments because the only comparison is SPIRAL's with Stages Complete Seat, which was replaced in a short period of time, and the Normal Seat, which has a hardened Seat Cover. The Seat Cover itself is soft and elastic, so it is very good for a few hours of riding without getting tired. (Seat shape is NORMAL, so the surface of the buttocks will be sore after a long run.) 。
In my personal opinion. Seat CoverSingle Body price is a little high?" I think it's a good idea, but I'm not sure if this performance is enough to convince me. I think it is acceptable for this kind of performance.
[Points to note]
The seat cover itself is sewn three-dimensionally, so it is easy to put up, but the reverse side of the seat base of the WR has a rather complicated shape, so there are many parts where it is difficult to put up the tucker.
As I mentioned above, when reupholstered with STD Shape's Seat, the Siri will be sore after a long ride! (Due to the nature of OEMSeat) If you want to avoid this, you can make the seat wider or install shock-absorbing materials.
Purchasing a Complete Seat may be an effective way to do this.
Other items that would be helpful
The deciding factor in the purchase
Performance of the Seat fabric itself.
The Large was inspired by an acquaintance of mine who was using the same product.
[How is it used?
We use it for mountain play and Flat forest walks.
It is a little too heavy for me, so I don't use it for difficult Attacks, but I really enjoy Flat forest roads.
【Included Parts:presence or absence】.
SeatBody and a simplified Instruction Manual are included.
[ITEMS TO BUY TOGETHER
Tucker& needle with short legs to stop Seat if this is your first time reupholstering. (core? ball?) If you want to make it waterproof, use Vinyl sheet. (Garbage bags are also acceptable) The Coking agent may not be necessary since the sewing is done by Crimp Type.
Opinions and requests to Manufacturer.
I think it would be great if the slightly older Minor car models etc. could also be expanded into a lineup. View detail

The ball joint could be a little stiffer from the start….

The price and designability are excellent, so Cost performance is high, although I personally like it,
The ball joint at the base of the mirror was shipped very loose, and although a special tightening bracket was included in the package, it was difficult for me, a clumsy amateur, to retighten it.
(I had the shop do it for me since it was also in conjunction with the Handlebar replacement …) View detail

Purchased for Replacement because it was worn out.

Replaced with a Red Pad that worked well for the price because it was worn out.
I don't drive off-road anymore, so this is enough for city driving and touring main.
It works very well, but the durability is not so good and I think it is too early every time. View detail

Red is Fashion!

Can be installed with a single screwdriver.
Recommended for dress-up appearance.
Packing was reused. View detail

Fashion!

Dress-up!
Installation is easy with a 7mm Spanner or MONKEY. View detail

Usable normally with no problems.

Element is exchanged every two times when changing Oil
I have used various manufacturers' products to get points or to get them at a discount, but this KIJIMA product is just as good as the others and works just fine. View detail

It did not suit me.

[How is it used?
It was installed from the beginning on a used WR250R that I bought about 10 years ago.
The premise is that the previous Owner had a short Rear shock ride height adjustment Quantity:I was not sure if it was the Seat or the Shock adjustment that made the footing better (there was no Normal seat when I bought the car).
The car was delivered at Motorcycle shop and on the way home. I want to replace Seat." I sold it after I got a used Normal seat.
How was your experience with it?
Seat surfaceFront is depressed like a road motorcycle, which makes it difficult for the rider to move the front and rear seating positions while driving in a seated position, making it boring to ride in an off-road type vehicle.
Since you have purchased a Dual PurPass vehicle, the front and rear Quantities:Pair (for Left and Right) I am a person who wants to enjoy weight transfer by freely changing the seating posture to Seat not needed at all." It was
I later learned that the Seat has been changed from the Sponge inside, but since I sold it after purchasing the vehicle without examining this product for the reasons mentioned above, I have no idea about the afternoon ride over long distances, etc.
I have no good or bad impression of the Seat Cover. Normal It was
If I'm honest, I'd say it's a Seat for city driving or touring out with an on road motorcycle.
How did it compare to other products?
I would compare it to the OEMSeat that replaced the remains of this Seat, but the OEMSeat was better for me.
I'm sorry that I don't quite understand the advantages of this Seat, but if the Front seat is lower than the OEMSeat... It is suitable for people who are not comfortable with the footing of a normal seat." It may be.
[Points to note]
If you try to move the seating position on the seat while driving, it is caught because the seat surface is not flat, but it is not so much that it interferes with driving, but in my case it spoils the fun of driving, so the normal seat was sufficient.
Other items that would be helpful
The deciding factor in the purchase
As mentioned above, it was already installed when the vehicle was purchased and was delivered as is.
I found out the price of the product from Webike. High! I thought.
[How is it used?
We use it for mountain play and Flat forest walks.
【Included Parts:presence or absence】.
It was attached to a used car, so I don't know much about it, but it looks like SeatBody only.
[ITEMS TO BUY TOGETHER
Not particularly
Opinions and requests to Manufacturer.
I think it is wonderful that there is a wide variety of lineups to meet various needs. View detail

The work itself is

The exclusive design of the car model allows for smooth installation.
However, as mentioned in the Instruction Manual, if Molybdenum grease is not applied at the banjo bolt, the fluid will seep and leak.

I read the Instruction Manual and installed it as is, thinking that it would be large and sturdy without grease, but the fluid leaked.
I had to rush out to buy Molybdenum grease.

We recommend that you prepare Molybdenum grease when you buy it, because Grease is not included. View detail

Convenient and lightweight! But low strength

Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft. View detail

I appreciate the affordable price.

[How is it used?
The KDX220 I purchased used was not in bad condition for an old vehicle from the 1990s, but the seat cover was in a slippery condition because the surface had begun to harden, probably because it was from that era.
On the way home after taking delivery of the car at Motorcycle shop, my buttocks moved back and forth every time I accelerated or decelerated, making it very difficult to enjoy the ride, and as soon as I started driving. The first custom was to reupholster the Seat Cover. It was like that.
Originally, I was going to bLOOVE it, including a look at the vehicle, but I went home right away and looked at Webike's product introduction section. KDX220 Seat I've been searching for...
Since it is an old vehicle, there are not many choices, but I-Net's Off-road Vehicle UniversalSeat Cover was a hit, and the price is low! If by some chance I fail, I'm ready to give up." So I bought it
How did you like it?
As a universal product, it is not as good as the Seat fabric made by a three-dimensional manufacturing process for each car model, but I personally think that the KDX Seat itself is not a complicated shape, so I was able to stretch it well.
The new fabric is highly flexible and the dimpled finish gives it a high grip, so you can enjoy riding without being carried back and forth every time you accelerate or decelerate.
To be honest, I wanted to stick with the OEMSeat Cover, but after looking at the price, the thickness of the fabric, and the condition of the finished product, I felt this product was sufficient.
How did it compare to other products?
There are few choices in terms of car models to begin with, and other products are expensive and have stopper belts sewn into the seat surface. I mean it!" I couldn't choose one because I had a strong feeling that it would be embarrassing to me, as I have poor driving skills.

What points should I pay attention to?
Patience and ingenuity are required because the products are not three-dimensionally sewn for car models.
If the tucker is driven in too shallow, there is a risk that the fabric will break from the tucker.
Front and back of the Seat are loosely secured to the Quantity:Pair (for Left and Right) When pasting the "Beauty" sponge, it should be pasted along the "Seat sponge" without wrinkles to make it beautiful.
Other items that would be helpful
The deciding factor in the purchase
The only Seat fabric that was safe for normal use was sold only by iNet.
We were not able to confirm that the products were made by KawasakiOEM, so we did not consider them in this case.
[How is it used?
Basically, it's Main for city driving. I can't even use SEROW, so it was too Hurdle for me to play in the mountains with a 2CycleEngine equipped car.
【Included Parts:presence or absence】.
Seat CoverQuantity:1pc. with Instruction Manual and Vinyl for waterproof.:Set
Tandem belt is not included, so those who need it must purchase it separately or reuse the OEMBelt.
[ITEMS TO BUY TOGETHER
Seat fabric to fasten to Seat Base seat. Tucker. and short-legged core.
It may not be necessary for those who apply Vinyl underneath, but for those who apply directly to Sponge without Vinyl, it is better to prepare SiliconCoking agent to be applied to the reverse side seam of the Seat fabric.
Opinions and requests to Manufacturer.
Although it may not be a problem for popular cars, it is a product that older cars and minors cannot do without, so we hope you will continue to sell Lineup for a long time. View detail

PetitCustom

[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system. View detail

just right

The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size. View detail

Anyway, it's light.

I chose MOTARDMedium, which has almost the same shape as the OEMSteel handle of the crf250rally50

It has a slightly shallow aperture and is my personal favorite Handlebar.

Aluminum Handlebar is really light and changes handling drastically! View detail

Peace of mind that it is made by MORIWAKI

The peace of mind of being made by MORIWAKI.

I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.

So far, no problems at all. View detail

Fits ZX-4R

It can be attached to ZX-4R without any problem. View detail

Focus on appearance

It is for bonsai.
Chain may need to be adjusted as it becomes taut.
Installation was somewhat difficult due to the stiffness of the Slider.
Quantity, not before/after:Pair (for Left and Right) I put it on and it went on easily. View detail