Reviews
Easy to install, better than ManufacturerOEM
The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material.
View detail
First brembo
I usually use Daytona's Golden Padχ, but I bought brembo's Brake Pads for the first time.
I have only test-driven it a little in town, so I don't know how comfortable it is on mountain passes, etc., but I have a feeling that it will be very enjoyable.
View detail
very good. This is excellent in finish and quality
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail
BrakeTouch is natural
I used to use Golden Padχ but this time I decided to go with Red Pad. (because I heard it is less aggressive to disc)
After the replacement, I test drove the car and it seemed to brake as much as I held it. I think it is easy to drive in town.
It might be easier to check the remaining amount if the Pad is Red.
View detail
Usable as usual
The price is cheaper than OEMetc., though it is a part that is not often replaced. View detail
Already the third one.
Every time I change motorcycles, I install a new grip heater, but this heater is the only one I use. The heater remembers the last Level, so it keeps the temperature at the right level. View detail
For REBEL.
I bought this to change the look of REBEL.
It is expensive for Mirror.
It's easy to put on and cool!
View detail
Good. ??
In my case, I could not install other holders because they interfered with the bracket of the driver's license plate, so I found this product, which is the same size as the Plate, and purchased it immediately.
The License Plate is the same size as the License Plate, so if you do not have enough space to install the License Plate, you can use the "Large" Recommendation!
It is a fairly sturdy Plate-type Holder, so you no longer have to worry about bending the License Plate by catching your foot or Cover. ^o^
View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
Performance Up Expectations
I purchased this for my Grom (JC92).
Because of the single cylinder, the difference between a good and a bad Plug is
I think it will come out.
I also expect fuel economy.
The product is NGK, so there is no problem and
I am wondering if the durability is also good.
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
Fits: YAMAHA R100 ROADSTER, YAMAHA MAJESTY, YAMAHA GRAND MAJESTY, YAMAHA TMAX, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE250 burgman, KAWASAKI VULCAN DRIFTER, KAWASAKI Epsilon, KAWASAKI ZZ-R1200, KAWASAKI ZZ-R1100, HONDA VALKYRIE, HONDA FUSION, HONDA FORZA, HONDA FORESIGHT, HONDA Silver wing
It is thin in every way!
The material was not like this manufacturer's, made of Chinese PelePera, and it was not durable enough for summer use, perhaps due to weak UV rays, and was in a chattering state. I reinforced it with tape several times a week and it was in a wartime-like state! I was hoping it would last a year. View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
LEAD125Plug replacement
Same Plug as last time
I'm planning to replace it soon.
Reliable NGKWindshield IRIDIUM
View detail
Fits: HONDA CBF125, YAMAHA Majesty 250, YAMAHA magsam (var. of mushroom), YAMAHA Grand Majesty 400, YAMAHA XVS950A, YAMAHA Grand Majesty, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT R Spec, SUZUKI Swish Limited, YAMAHA BOLT, SUZUKI swish, SUZUKI gyxer, SUZUKI address 125, SUZUKI Address 110, SUZUKI V-Strom 250, SUZUKI GSX250R, KAWASAKI Vulcan 900 Classic, KAWASAKI Vulcan 900 Custom, HONDA READ 125
periodic replacement
Because I ran about 7500 km, I exchanged Plug. The burn condition of the old Plug was good and Standard Plug BP5HA worked well enough. Standard Plug BP5HA is installed this time, too. The fuel consumption is 42-43km. The new Plug seems to have more power, but it may be the Brush Turbo. View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
Purchased with high expectations
I purchased this for my Grom (single cylinder).
It is a little expensive, but the combustibility is a little better.
I hope it gets better.
It is hard to see the change from OEM Product,
I'm hoping for a small effect on fuel economy etc.
View detail
Fits: YAMAHA MAJESTY250, YAMAHA MAXAM, YAMAHA GRAND MAJESTY400, YAMAHA GRAND MAJESTY, YAMAHA XVS950A, YAMAHA SCR950, YAMAHA GRIZZLY700FI, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA BOLT, SUZUKI Swish LIMITED, SUZUKI swish, SUZUKI Gixxer, SUZUKI Address125, SUZUKI V-STROM250, SUZUKI ADDRESS110, SUZUKI GSX250R, KAWASAKI VULCAN900Custom, HONDA Dio110, HONDA glom, HONDA LEAD125
Buy two
Quality and Texture InfoNgk's plug is of good quality Use more than a typical spark plug to give you a sense of use Goods Plug Wrench to Buy With Easy to install Cost performance and comparison with other products, iridium is expensive WeBike packaging is always great. Arrives in a week for delivery and packaging Caution should be used when purchasing column values to match bike column values. Otherwise, you may not absorb or drain too much heat. Recommended for standard column values View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Wiring is Limit...in a way it fits.
This is the third KIJIMA Grip heater I have installed. The performance and cost performance are excellent, but the distance to the Right and Left Wiring connection points is short, and there is a fuse in that area, so I have to remove the tanketc. to get to it in case of emergency, which is a shortcoming.
The OEM grip for the CL500 is a type without a bar end, and this grip heater is compatible with this type, but this time I installed a Zita bar end plug, which fits well. The smallest part of the supplied throttle fits perfectly.
And when the Grip is aligned with the LeftHandlebar End, there will be a gap of about 3mm at the Handlebar Switch.
View detail
Fits: SUZUKI ADDRESS110, SUZUKI V-STROM250, SUZUKI GSX250R, KAWASAKI VULCAN900Classic, KAWASAKI VULCAN900Custom, HONDA LEAD125, HONDA PCX150, HONDA PCX, HONDA CBF125, HONDA CB125F, SUZUKI Address125, SUZUKI Gixxer, SUZUKI swish, SUZUKI Swish LIMITED, YAMAHA BOLT, YAMAHA BOLT Shoulder Bag RSpecifications, YAMAHA GRIZZLY700FI, YAMAHA SCR950, YAMAHA GRAND MAJESTY, YAMAHA MAJESTY250
You can't feel it.
I bought a new GSX250R with 9000 km on it and replaced it with a new one. I think it is natural because I replaced the deteriorated plug with a new one. I think it is impossible for a human being to feel 0.~%. I think OEMPlug is the best one when I look at the cost performance. View detail
Just the right Base for the Fender Eliminator
I bought this as a reinforcement for the License Plate of the Fender Eliminator. I wanted to use a slightly larger frame with a red frame, but it interferes with the tail cowl, so I decided to use this frame, which is almost the same size as the License Plate. It doesn't look any different, but it gives me a sense of security as a reinforcement. View detail
Good texture
Large size as the License Plate.
Guard the bend of Number casually.
If you don't look closely, you can't even tell it's on.
View detail