Reviews
Fits: YAMAHA FZ1, YAMAHA FZ1, YAMAHA FZ1, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-STAR 1100 CLASSIC, YAMAHA V-STAR 1100 CLASSIC, YAMAHA VIRAGO 250, YAMAHA VIRAGO 250, YAMAHA FZ1, YAMAHA FZ1, YAMAHA V-MAX, YAMAHA V-MAX, YAMAHA V-MAX
YAMAHA OEM SEAL
I have been riding my bike without having a airfilter seal.I checked my air filter condition once a year but didn't notice that there should be a seal around the air filter housing.However My Air Filter Seal Was Missing.So I ordered one from WEBIKE SHOP because they sell high quality products and OEM parts at low prices . webike the only place that charges lowest prices .after placed a order my package was received within a week..Thanks to webike for the HIGH QUALITY PACKAGING ..Air filters have important job of keeping dirt and debris out of the engine.An airfilter must fit snugly in its housing to block contaminants and prevent air leakage.To accomplish this,airfilters have a seal around their perimeter.This seal is very important part.To install this brand new seal first need to loose four screws on the airfilter housing.after that keep pushing a brand new seal into the perimeter of the airfilter housing until it completly cover around.It's good to have that piece back on my bike.Thank You So Much For The Support WEBIKE.THE BEST ONLINE SHOP IN THE WORLD.Yeah I can say that. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
We recommend replacing them together when replacing the Grip.
The OEM Pipe is a little shorter than the OEM Pipe, but I was able to install the 120mm Grip and the external bar end with almost no gap. View detail
Fits: YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA BOLT, YAMAHA BOLT, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA SUPER TENERE ES, YAMAHA SUPER TENERE ES, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA BOLT, YAMAHA BOLT
Factory Washer !
THICKNESS AND THE PRODUCT QUALITY IS SUPERB .when I replaced my tw200 neutral switch , was able to replaced that copper gasket washer with a brand new one. don't hesitate to replace washer gaskets with a new one. this washer not that pricey but not easy to find.OLDER WASHER GASKET CAN CAUSE LEAKY OIL .made a right decision get the parts before disassembly & get the job done completely.this gasket washer worth the money .Highly recommended to anybody who works with your own. ALways choose OEM products will make you trouble free . View detail
Fits: YAMAHA DT200WR, YAMAHA TT-R250, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA TT600, YAMAHA YFS200 BLASTER , YAMAHA DT230 LANZA (DT230)
BUT STYLE
I installed this product on my YAMAHA DT200WR 92. Because the DT200WR has slightly less displacement than other dual-purpose bikes of this age, I chose the 45T (OEM: 42) for acceleration. As expected, we got good acceleration. The durability of this product will not be as good as OEM parts, but it will look racy and help reduce unsprung weight. View detail
Fits: bimota YB-7, bimota SB6R, bimota SB6 (former Soviet Union intelligency agency), YAMAHA TT-R250, Vespa 50ET4 Vespa, MALAGUTI Madison 400, PIAGGIO Liberty 50, BENELLI TnT1130, APRILIA SCARABEO50 4T, YAMAHA YZF750SP, YAMAHA YZF600R Thundercat, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ6N, YAMAHA WR250F, YAMAHA TT250R Raid, YAMAHA TT250R
Trust
Made by trusted NGK.
I think that a safe place is definitely the way to go without getting too hung up on the details.
View detail
Fits: YAMAHA FZR400, YAMAHA ZEAL, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA FZR250, YAMAHA TT225, YAMAHA TT225, YAMAHA TW200, YAMAHA TT-R250, YAMAHA TDM850, YAMAHA SRX600, YAMAHA FZR400, YAMAHA SRX400, YAMAHA TDR250, YAMAHA 350R, YAMAHA DRAGSTAR250, YAMAHA XTZ750 SUPERTENERE, YAMAHA SEROW225, YAMAHA XJ600, YAMAHA VIRAGO250(XV250)
Used in SRX6
The GelBattery I bought last year was swollen and the Blinker was acting strangely, so I replaced the Regulator which had been feeling abnormal heat for a while.
The Fixing Screw interfered with other Screws during installation, so it is fixed with Needle Gold for now. The model is 1JK.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250X, YAMAHA YZ450F, YAMAHA YZ450FX, YAMAHA YZ65, YAMAHA YZ85, YAMAHA YZFR3, YAMAHA TTR250, YAMAHA TTR90E, YAMAHA TW200, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR426F, YAMAHA WR450F, YAMAHA XT225, YAMAHA XT250, YAMAHA YZ125X, YAMAHA YZ250FX
What is a compliant product (philosophy)
It was purchased for use on the XSR900, but was not used in the end, and the STD Mounted Product Grip was taken and used.
Reasons for not using it include
Length is 5mm shorter than OEM Product
There is a non-slip rib that OEMs don't have.
Certainly, even if it is 5mm shorter, it would be possible to use it if the inner diameter and Wire fixing part are the same Size.
Also, Grip will probably go in even if there is some Rib to prevent slipping.
The Instruction Manual also lists the XSR900 as a compatible model, but it clearly states that some models require modifications, etc.
The Manufacturer is not at fault, as even the actual photo is posted and shows the length and rib properly.
It is easy to assume that they are exactly the same shape as compliant products.
Usable = Compatible
Should we consider this?
It is quite a philosophical piece.
View detail
Fits: YAMAHA YZ250, YAMAHA TT250R RAID, YAMAHA YZ125, SUZUKI DR250R, YAMAHA DT200R, YAMAHA DT230 LANZA (DT230), YAMAHA DT125R, YAMAHA TT-R250, HONDA XR400 Motard, SUZUKI RM125, SUZUKI RM250, SUZUKI RMX250, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KDX220R (For competition), KAWASAKI KDX220SR, HONDA CR250, HONDA XR600, HONDA CR125, HONDA XR250 BAJA
Exactly to SEROW.
[How is it used?
On8:Off2 down the road and bad road touring is the main.
Was the one you received as per Image?
Yes, it was just as in the Image, size was S, and both thickness and length were JUST right for serow−250.
Boots texture is better than expected, although the Band is not as good as described below.
Was the installation difficult?
It is the same level as OEMBoots and is not difficult.
For those who can remove/install the front fork, there should be no problem at all.
How was your experience with it?
Functionally, it is no different from the OEM, but above all, it looks thicker and more robust, and Color:Yellow is my personal favorite as a color accent.
The durability is unknown, but it is cosmetic enough, so I consider it a consumable item.
[Was there anything that disappointed you?
As others have commented, the attached Band (Clamp?) is a Material:It looks like Stainless Steel, but the texture is not so good.
Fortunately, in the case of SEROW, the upper side could be used with the OEM band, and the lower side was able to fit in the groove of the bottom case as well as the OEM case.
Therefore, the lower Band was not needed for a while.
View detail
Fits: YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, HONDA CB250RS, HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F
It chose by appearance. A portion black when grasping is collapse.
It chose by appearance.
A portion black when grasping is collapse.
View detail
Fits: SUZUKI DR250R, SUZUKI DR-Z250, PIAGGIO LIBERTY-50, SUZUKI DR350, SUZUKI GSR600, SUZUKI GSX-R250R, SUZUKI GSX-R1000, SUZUKI GSX-R1100W, bimota YB9SR, bimota SB8R SP, bimota YB-7, MALAGUTI MADISON400, KAWASAKI BALIUS, KAWASAKI BALIUSII, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI XANTHUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZ-R600
To be honest, I am not sure how effective it is.
Idling had become unstable and starting was getting worse, so I did not think the plug was bad, but just to be safe, I replaced it with an OEM plug. I could have done it myself if I wanted to, but the R1's forward leaning engine is very difficult to change plugs, so I left it to the store.
I had faint hopes that all the malfunctions would be cured, but I did not notice any change. However, it is more durable than the OEM plug, so the next replacement is likely to be in the near future. I am glad that I was able to extend the replacement cycle.
View detail
Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1100W, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI DR250R, SUZUKI DR-Z250, MALAGUTI MADISON400, PIAGGIO LIBERTY-50, KAWASAKI BALIUSII, KAWASAKI BALIUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZ-R400, KAWASAKI ZZ-R600, KAWASAKI ZZ-R1200
I feel more powerful.
It is being used for SEA BASS and DJEBEL250XC.
I feel that the Engine's starting performance has been improved, and the fee rings while running are more powerful.
The unit cost may be high, but since it is a single cylinder and uses only one plug, Cost was not a major concern.
View detail
Fits: ADIVA AD250/IE, APRILIA SPORTCITY CUBE 250IE, GILERA RUNNER VX125 4T, HONDA HORNET S (reimported), KAWASAKI NINJA 650R (reimport), MALAGUTI MADISON RS250, PIAGGIO BEVERLY250, PIAGGIO LIBERTY150/LE, PIAGGIO LIBERTY50, PIAGGIO VESPA 50ET4, PIAGGIO X8-125, PIAGGIO ZIP125 4t, SUZUKI BANDIT600/S (reimport), SUZUKI GSF600/S (reimported), SUZUKI GSX-R250R, SUZUKI GSX600F (reimported), TRIUMPH DAYTONA 675, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH TT600
Good product
Delivery on time Well packed and secure The product is in accordance with the information posted on the website Good product quality, correct Japanese goods View detail
Fits: YAMAHA FZR400, YAMAHA TDM850, YAMAHA FZR400, YAMAHA SRX600, YAMAHA TT-R250, YAMAHA TT250, YAMAHA T225, YAMAHA TW225E, YAMAHA TW200, YAMAHA XV250 Route 66, YAMAHA FZR400RR, YAMAHA XJ400S, YAMAHA XJ400L, YAMAHA XJ600S, YAMAHA FZR600R, YAMAHA RZV500, YAMAHA XTZ750, YAMAHA SRX400, YAMAHA RZ250R, YAMAHA FZX250 ZEAL250
At R1-Z
It was used as a thermal countermeasure product for R1-Z.
The mounting pitch did not fit even after shaving and could not be installed with two screws, so it was fixed with one screw.
Coupler's Flat Terminal was also slightly thinner than the OEM one, and the couplers were not inserted properly.
I have reworked it.
I think heat dissipation is improved.
View detail
Fits: ADIVA AD250/IE, APRILIA SPORTCITY CUBE 250IE, GILERA RUNNER VX125 4T, HONDA HORNET S (reimported), KAWASAKI NINJA 650R (reimport), MALAGUTI MADISON RS250, PIAGGIO BEVERLY250, PIAGGIO LIBERTY150/LE, PIAGGIO LIBERTY50, PIAGGIO VESPA 50ET4, PIAGGIO X8-125, PIAGGIO ZIP125 4t, SUZUKI BANDIT600/S (reimport), SUZUKI GSF600/S (reimported), SUZUKI GSX-R250R, SUZUKI GSX600F (reimported), TRIUMPH DAYTONA 675, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH TT600
The best plugs period
Great product and great service as usual from Webike Japan, have used these plugs before and now using them in my ZX14R Ninga, so far they are performing great couldn't be happier with them, more power and quicker acceleration of the start as you would expect from these plugs, the price and delivery from Webike is the best you will get, I live in Queensland Australia and shop with Webike Japan for everything now, could not recommend anyone better. Steve Brisbane Australia View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
You are right to change it.
The product is as good as I imagined. I like it because it is the part I touch the most. View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
You are right to change it.
I have Large hands, so OEMGrip was too thin and made me tired. After changing to this product, I don't get tired even after riding for a long time. View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
It's as good as I expected.
I have Large hands and the OEMGrip was too thin and very tiring, but this product has just the right grip. View detail
Fits: bimota YB-7, bimota SB6R, bimota SB6 (former Soviet Union intelligency agency), YAMAHA TT-R250, Vespa 50ET4 Vespa, MALAGUTI Madison 400, PIAGGIO Liberty 50, BENELLI TnT1130, APRILIA SCARABEO50 4T, YAMAHA YZF750SP, YAMAHA YZF600R Thundercat, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ6N, YAMAHA WR250F, YAMAHA TT250R Raid, YAMAHA TT250R
OEM adopted products for peace of mind
Since it is an OEM-adopted product, it installs without problems and maintains its performance with periodic replacement.
I replace it at the same time as the Air Filter when I feel that the fuel consumption is getting worse. I replace it at the same time as the air filter when I feel my fuel consumption is getting worse.
View detail
Fits: YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 250cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA SR250 236cc All, YAMAHA MT03 660cc All, YAMAHA MT03 660cc All, YAMAHA MT03 660cc All, YAMAHA MT03 660cc All
Reliable K&N products
Reliable K&N products
With YOSHIMURA's Original sticker
This is my third repeater.
I don't really have a feel for the performance.
The trust of the Brand and the fact that YOSHIMURA is carrying it.
Of course, the air filter is also made by the company.
View detail
Fits: SUZUKI DR250R, SUZUKI DR-Z250, PIAGGIO LIBERTY-50, SUZUKI DR350, SUZUKI GSR600, SUZUKI GSX-R250R, SUZUKI GSX-R1000, SUZUKI GSX-R1100W, bimota YB9SR, bimota SB8R SP, bimota YB-7, MALAGUTI MADISON400, KAWASAKI BALIUS, KAWASAKI BALIUSII, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI XANTHUS, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZ-R600
Trustworthy
It is a consumable item and is replaced frequently.
Windshield IRIDIUM, so initial performance is maintained longer.
It is safe to use
View detail