Reviews
Fits: HONDA CB400SF, HONDA CBR250RRR, HONDA CBR400RR, HONDA CBR600R, HONDA CBR600F, HONDA NSR250 Series, HONDA FIRE STORM, HONDA VFR400R, HONDA RVF, KAWASAKI ZXR250, HONDA XELVIS, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI ZZ-R250, KAWASAKI ZZ-R400, SUZUKI ACROSS, SUZUKI GSX-R250, SUZUKI GSX-R400, SUZUKI GSX-R750, SUZUKI GSX250X KATANA
300 denier thickness and draw cord make it large and durable even on typhoon days.
The 300 denier thickness and draw cord are so convenient that I have used this product on all three of my vehicles (CUB, SR, and Ritter SS).
I think the size is generally as indicated by the manufacturer, Large sturdy, but I wanted to make it long enough to reach the ground, so I made it L for the CUB, 3L for the SR400, and 4L for the Litter SS. Only the Litter SS could have been 3L.
Thickness is never proportional to durability, but durability is good.
It has lasted more than 2 years even in the worst condition, where it faces completely south and the sun shines on it without any shielding.
After one year, the water repellency will disappear and the waterproof property will also decline, but the Level is sufficient for more than two years as far as waterproof is concerned.
The cover used for the CUB has a little tear at the projection of the Mirror, but it does not tear at once from there. The three units in the picture are 1.5 to 2.5 years old, but as you can see in the picture, the surface is not so badly damaged.
The 300 denier is easy to hang because of its weight, and the draw cord is too convenient.
When I was using a Cover without a Draw cord, it was Large strange to tie it with a string because it peeled off easily in strong winds.
This product will not be rolled up even in typhoons if pulled tight.
If it is difficult, I would like to have a type with the same specifications but without the lock hole.
When putting on and taking off, it gets caught on the Chain Pull or Bar End, which is a huge hindrance, and it is also a problem because rain gets in through this area and rusts the Nipple and other parts.
Anyway, I highly recommend this product, I've used various Covers for over 30 years and I think this is the best buy.
View detail
Fits: ADIVA N125, ADIVA R125, APRILIA Leonardo 125, APRILIA Leonardo 150, bimota Bellaire 600, KYMCO Racing 125, KYMCO Racing 150, MALAGUTI Madison 125, MALAGUTI Madison 150., PIAGGIO X9-200 Amalfi, SUZUKI Intruder LC125, YAMAHA FZS600 Fazer, YAMAHA WR400F, YAMAHA YZ400F, bimota YB-7 Folgore, APRILIA Scarabeo 125, APRILIA Scarabeo 150, BENELLI Velvet 125, BENELLI Velvet 250, BETA rr 4t lc enduro
Reliable Performance from the Standard NGK Spark Plug on the Grom BBK
About quality and texture: I am happy with the quality of the CR8E standard spark plug from NGK, the properties of the standard NGK spark plug like copper cored center electrode ensure a reliable spark. About the feeling of use: The NGK CR8E spark plug is better suited to the Grom BBK then the original installed NGK CPR6EA-9, the cooler rating ensures a trouble free spark with the higher compression piston of the BBK. Products to buy together: NGK also offer high performance spark plug caps which would also be desirable to purchase alongside the NGK CR8E standard spark plug to remove any chance of the performance of the standard spark plug being decreased. Difficulty of installation: The process to install takes about 5 minutes. Firstly, check the spark plug gap and adjust if required, then simply remove and install the spark plug and refit the spark plug cap securely. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality standard spark plug at a great price that is more then suitable for the perforamce requirement of the Grom BBK when considering the additional cost and minimal performace advantage of the iridium spark plug. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The original Honda spark plug heat rating is 6. Recommended heat rating for the stock engine is 6 or 7 and recommended heat rating for a big bore or high compression engines is 8 or 9. View detail
Fits: ADIVA AD250/IE, APRILIA RSV1000SP, APRILIA RSV4 FACTORY/R, APRILIA SPORTCITY CUBE 250IE, APRILIA SPORTCITY250, BENELLI TORNADO900/TRE, BENELLI TnT1130, DUCATI 749/S/DARK, DUCATI 996R, DUCATI 998/S, DUCATI 998R, DUCATI 999/S/R, DUCATI 999BIPOST, DUCATI MONSTER S4R/ S4RS Testastretta, DUCATI ST3, GILERA DNA125, GILERA RUNNER VX125 4T, HONDA VFR800 (reimported), ITALJET JET-SET150, KAWASAKI BALIUS/II
I always buy Denso products with confidence.
I have been using Denso products for 5 years because it is a very old car and there are parts that are hard to trust in other brands' products. We Bike itself sells at a reasonable price, so I buy it both when I buy other products, and I am always satisfied. are doing -------------------------------------------------- -------- It is a very old difference and other brand products are difficult to credit, so we have been using Denso products for 5 years. I do it. Powered by Google Translator View detail
Fits: ADIVA N125, ADIVA R125, APRILIA Leonardo 125, APRILIA Leonardo 150, bimota Bellaire 600, KYMCO Racing 125, KYMCO Racing 150, MALAGUTI Madison 125, MALAGUTI Madison 150., PIAGGIO X9-200 Amalfi, SUZUKI Intruder LC125, YAMAHA FZS600 Fazer, YAMAHA WR400F, YAMAHA YZ400F, bimota YB-7 Folgore, APRILIA Scarabeo 125, APRILIA Scarabeo 150, BENELLI Velvet 125, BENELLI Velvet 250, BETA rr 4t lc enduro
The 8 heat rating spark plug works best with my modified engine setup
About quality and texture, I can confirm that the quality is great and that the materials used are a combinations of copper, porcelain and nickel alloy for the standard plugs from NGK. About the feeling of use, After 1000 kms of use with the previous 9 heat rating spark plug the bike would stall and be difficult to start in colder weather conditions. The 8 heat rating spark plug works best with my modified engine setup with no negative side effects. Products to buy together, To maximize the performance of your spark it would be ideal to also add an upgraded hyper ignition coil from Takegawa to your cart. Difficulty of installation, I can say the fitment of the spark plug for my installation was very easy due to the ease of access to the cylinder head and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive a spark plug made of quality materials from a well known brand. Pricing of stand spark plugs from other brands is similar where as iridium spark plugs are much more expensive. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
NISSIN [Standard Lever] Brake Master Cylinder Kit [Horizontal Type 14mm/Removable Tank Type]
It was installed as a substitute for the 2010 GSX-1250FA genuine master cylinder. The fitting fits perfectly, and the brake operation feeling is the same as the genuine one.
However, the bolts that secure the brake fluid reservoir tank to the handle are not included and must be purchased separately. It took a lot of trial and error to find the right thread pitch. The product is very satisfied. -------------------------------------------------- -------- It was installed as a replacement for the 2010 GSX-1250FA genuine master cylinder. The fitting is perfectly fits well, and the brake operation is the same as the pure. However, the bolt that fixes the brake reserve tank to the handle is not included, so you must purchase it separately. I have experienced several trials and errors to find the right pitch of the screws. The product is very satisfying. Powered by Google Translator
View detail
Fits: ADIVA AD250/IE, APRILIA SPORTCITY CUBE 250IE, GILERA RUNNER VX125 4T, HONDA HORNET S (reimported), KAWASAKI NINJA 650R (reimport), MALAGUTI MADISON RS250, PIAGGIO BEVERLY250, PIAGGIO LIBERTY150/LE, PIAGGIO LIBERTY50, PIAGGIO VESPA 50ET4, PIAGGIO X8-125, PIAGGIO ZIP125 4t, SUZUKI BANDIT600/S (reimport), SUZUKI GSF600/S (reimported), SUZUKI GSX-R250R, SUZUKI GSX600F (reimported), TRIUMPH DAYTONA 675, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE, TRIUMPH TT600
Is the shape Large sturdy?
Used for ZX-14R. Chose this product for its long life because replacing plugs is so large and strange that it kills me.
I think it is harmful because the position of the spark is farther from the combustion chamber Center than OEM.
It is used for MaintenanceCycle reduction because it is Large strange to remove it.
I bought six of them, even with four cylinders, because I don't want to use the ones where the orientation comes in an undesirable position.
It is not so relevant for DOHC cars where the plug comes to the center of the combustion chamber, but for 2Valve cars where the plug comes to the center of the combustion chamber, it is not so relevant.
The theory behind the diagonal stab Plug is to have the Minus electrode come to the Center of the combustion chamber.
View detail
Fits: KAWASAKI ER-4n, YAMAHA FZ400, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA YZF-R7, KAWASAKI ZX-6, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZX-RAFA, KAWASAKI ZX-RBF, YAMAHA DIVERSION400, KAWASAKI NINJA1000SX, KAWASAKI VULCAN400
with Magnet
with Magnet, but it is a waste because Magnet will also be discarded in the exchange.
The Drain plug also comes with Neodymium, but the Drain mag has a
Iron dust was firmly attached. The mag effect of this would have to be disassembled.
I don't know...used on ZX-14R and Z900RS...ZX-14R has 100,000km...
I guess it is necessary because of the iron dust on the drain plug.
View detail
Fits: YAMAHA DRAGSTAR400 CLASSIC, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR250, YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XZ400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJ750D, YAMAHA XJ650
Excellent for Cost performance
[How is it used?
It is used as Exhaust Gasket on XJR400R.
We are replacing the oil filter every 6000km, but because it is an external full exhaust system, the exhaust pipe must be removed when replacing the filter, and the exhaust gasket must be replaced.
Up to now, YAMAHAOEM Product500 yen/piece×4 pieces would be 2000 yen, so it was quite an expense, but this product is Quantity:2pc. I purchased the set for 450 yen, which is a very reasonable price, and I thought it was a KITACO product, which is a famous manufacturer, so I could be sure of its safety.
How was your experience with it?
The product itself is OEM Product and little manufacturing method (Material) seems to be different.
Is this a problem since they are about the same thickness, I've been using Liquid Gasket in conjunction with it and so far no disposal leaks and I'm happy with it.
I am a little concerned about the next time I replace it because other reviews said that it was very sticky when removing it.
How did it compare to other products?
Anyway, I think the price is excellent.
There are also several Other Brand Products, but their prices are not that different from OEM products, so it is safer to buy OEM products.
[Points to note]
I have to install the exhaust pipe after attaching the Exhaust Gasket, but it falls off at a high rate.
If you do this, you will pick up sand on the ground and it will be a hassle to wipe it off again. It is a good idea to apply oil or Liquid Gasket to the backside of the device to prevent this problem.
Other items that would be helpful
Opinions and requests to Manufacturer:Quantity:I would appreciate it if you could offer a cheaper version in 1 Set of 4pcs.
View detail
Fits: KAWASAKI ER-4n, YAMAHA FZ400, YAMAHA V-MAX 1200, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA YZF-R7, KAWASAKI ZX-6, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZXR250R, KAWASAKI ZX-RAFA, KAWASAKI ZX-RBF, YAMAHA DIVERSION400, KAWASAKI NINJA1000SX, KAWASAKI VULCAN400
How effective is the magnet?
[How is it used?
I am using it to replace the Oil Filter on my XJR400R.
We have tried different oil filters each time and this was the third time we tried KIJIMA's for the first time.
The other two times will both be made by DAYTONA.
How was your experience with it?
This is the first KIJIMA product with Magnet, so I have high expectations for it.
To be honest, I don't see any difference between this product and the OEM, but I am hoping that Magnet will be somewhat more effective in removing fine iron powder. The price is slightly lower than OEM.
How did it compare to other products?
The DAYTONA product is almost in the 1000 yen range, while the KIJIMA product is the same price without magnet, and with magnet it is about Plus300 yen.
I wonder if sometimes using with Magnet is an option.
For me personally, oil is more about quantity than quality, and I think that frequent replacement of oil is a large thing.
[Points to note]
Stop firmly at the specified Torque.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
Plug must be oriented 2ValveEngine required
Especially with 2Valve's sideways plug-in Engine, the Idol can be stabilized by centering the orientation of the Minus electrode.
The insulators will be beautifully burnt.
This plug is tightened 60 degrees after it hits according to NGK's instructions, so it is tightened for one side of the hexagon.
So, the four bottles purchased and used this time are Quantity:Only 2pcs were left.
It is a cheap item and I think this is about as good as it gets. The rest will be sold unused used.
This is loss-free.
The photo shows Marking in Pink color and the orientation of the electrode.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
I just replaced the plug on my SV650!
The car has not yet been driven more than 1,000 miles since delivery, but I replaced it.
On the SV650, the replacement process is a hassle.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
That's good.
It's a different Motorcycle! Acceleration is good, Idling is stable. View detail
Fits: YAMAHA DIVERSION600, YAMAHA DIVERSION400, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA TT600
It's so much easier to ride.
I wanted to lower the RPMs a bit more when using the highway.
The OEM was F15R45, but I waved it to F16R44 Long.
The embrace is not too tight, and the start is not as bad as expected, and the extension improves.
It is the best and easiest to ride.
View detail
Fits: SUZUKI STREET MAGIC 110, SUZUKI WOLF50, SUZUKI WOLF250, SUZUKI WOLF250, SUZUKI WOLF200, SUZUKI WOLF125, SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, SUZUKI Address50, YAMAHA DIVERSION600, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZ250, YAMAHA YZ250
YOSHIMURAtm24Carburetor in Setting!
YOSHIMURACarburetortm24 carburetor setting I bought this carburetor for my carburetor setting. I am looking forward to the setting. View detail
Fits: YAMAHA DIVERSION600, YAMAHA ZEAL, YAMAHA ZEAL, YAMAHA YZ250, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400, YAMAHA XJR400
YOSHIMURAtm24Carburetor in Setting!
I bought this carburetor for my carburetor setting of YOSHIMURA's Carburetortm24. I bought several kinds of carburetors because I didn't know which one would fit my carburetor. The price is reasonable. View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
Maybe it doesn't mean anything in particular...
I feel that the more solid the ignition is, the better the stalling and vibration, and the longer the service life (all of these things are true). I have a feeling." (Level)
Compared to the Standard Plug BP5HA, the price is 5~600 yen higher and more than twice as much, and yet the service life may be slightly longer. (Lol) 。
This may be one of the reasons why the old Motorcycle has almost one-shot startability in winter...
View detail
Fits: YAMAHA ZEAL, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1300C, YAMAHA XJR1300, YAMAHA XJ400, YAMAHA TZR250, YAMAHA TZR125, YAMAHA TMAX500, YAMAHA TDR250, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRV250, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA RZ250, YAMAHA RD400, YAMAHA FZR250
Installed with the installation of KITACOOpposite Caliper on MT03
Caliper replacement for MT03 due to insufficient capacity of Master Cylinder
We were able to transmit braking force firmly.
However, the OEM handlebar is too tight to handle the hose, so it may be better to replace the handlebar as well.
View detail
Fits: HUSABERG FE600e, HUSABERG FE501e, HUSABERG FE400e, HUSABERG FE600e, ADIVA N125, ADIVA R125, APRILIA SCARABEO125, APRILIA SCARABEO100150, APRILIA SCARABEO200, APRILIA LEONARDO125, APRILIA LEONARDO150, BENELLI VELVET125, BENELLI VELVET125250, BETA RR 4T LC ENDURO, BETA RR 4T LC MOTARD, bimota Bellaria600, CAGIVA V RAPTOR1000, CAGIVA V RAPTOR650, CAGIVA EXTRA RAPTOR1000, CAGIVA NAVIGATOR
GSX400 Plug replacement
I have been using the Meter for 20000 km and recently I felt that the starting performance was getting worse, so I replaced the plug.
Idling is stable even in recent cold weather with vigorous one-shot starting and a short warm-up time.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
NGK MOTODX
Replaced the plug from NGK Windshield IRIDIUM to MOTO DX. I don't know if it was too long since I replaced the plug, but I got the impression that the blow off was lighter. View detail
Fits: YAMAHA Zeal (i.e. a Zealot), YAMAHA XVZ1300TFS Venture MM Limited Edition, YAMAHA XVZ1300TFS Royal Star Venture S, YAMAHA XVZ1300TFS Royal Star Midnight Venture, YAMAHA XVZ1300TFM Royal Star Midnight Venture, YAMAHA XVZ1300TF Venture Star, YAMAHA XVZ1300TF Royal Star Venture, YAMAHA XVZ1300CTS Royal Star Tour Deluxe S, YAMAHA XVZ1300CTM Royal Star Tour Deluxe, YAMAHA XVZ1300CT Royal Star Tour Deluxe, YAMAHA XVS950XR-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CUD-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU-A BOLT, YAMAHA XVS950CU BOLT-R(A) SPEC ABS, YAMAHA XVS950CU BOLT-R SPEC, YAMAHA XVS950CU BOLT-C(A) SPEC ABS
Great durability.
I have no complaints at all about the efficacy.
I wondered what I had been using RedPad for all this time.
It has a terrific high longevity, as much as I can say.
I personally choose this one for my SR.
Almost every day because it was also a commuter issue.
I used it for more than 20 km.
After about 2 years of use, I installed it myself and also
I was worried because it didn't decrease too much, so I went to the Shop.
I had it replaced, but there was 4-5mm left.
Moreover, the Baxter was changed and the Brake Arm remained the same.
The Rear brake was almost 100% used as a decoration.
This is despite the fact that it was a Front brake request.
I'd rather just replace it with RedPad for a little bit.
It is better to use this one even if it is a little expensive.
It is by far the most cost-effective.
Crying is none for me.
View detail