Reviews
530-1010216
Gradual work to improve the performance of the HONDA SUPER CUB 50 CUSTOM engine has led to the need to replace the leading star with more teeth. I did not experiment with manufacturers and looked at the availability of a star with the necessary parameters from KITACO, in their assortment I found the detail I needed. As always, KITACO was not let down, the material and processing quality are at their best!!! View detail
C6HSA
My friend asked me to pick up a spark plug for his HONDA SOLO. NGK candles satisfy me with their quality and stable performance. The choice fell on a candle with a classic potassium number (6). At the moment, the candle is working properly in my friend's motorcycle... View detail
Acceleration Up
15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed!
View detail
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
KITACO Drive Sprocket (Front)
It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator
View detail
Cosmetically good.
This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail
good stars
Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.
The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original. It works clearly.
----------------------------------------------------------
The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly.
The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly.
Powered by Google Translator
View detail
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail
exchange
I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Great sprocket
It feels good to be able to buy good products at a low price. As it is a consumable, you have to change it often, but since it is cheap, there is no burden at all, so you can change it to stock price. The quality is also excellent, so you can buy it with confidence. View detail
Smooth?
When we changed the chain, we increased the number of pins by one and installed a 16T. At first, I was a little worried that I might not have enough power at the start of the ride, but it was not so much of a problem, and on the contrary, I feel that the ride became a little smoother. It may be just my imagination. View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Small gear replacement at an affordable price
I replaced the 14T small gear, which is the same as the original one, without any burden. First of all, I have confidence that it is a Kitaco product, and I expect the product to be durable as well. I purchased and installed the chain and large gear together, and I recommend them because they are satisfactory items at a relatively low price ---------------------------- ------------------------------ It is expected that it is a Kitako product. I bought and installed the chain and the waiting gear together, but I recommend it because it can be satisfied with a relatively low price. Powered by Google Translator View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
KITACO Drive sprocket
[About quality and texture] It has good quality that can replace genuine products. [About shipping and packaging] The delivery was very fast, so I was happy to install it quickly. The stapler on the package may be sharp, so be careful when opening it. I will purchase the same product next time. View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Very high CP ◎No accuracy problems
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.
Was the one you received as per Image?
The image is just as I imagined.
Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.
How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.
As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.
As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)
[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first.
View detail
Fits: HONDA CHALY 70, HONDA XL80, HONDA CHALY 50, HONDA XL50, HONDA CB50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA XR80, HONDA MOTRA, HONDA MONKEY R, HONDA MONKEY RT, HONDA JAZZ, HONDA DAX, HONDA DAX70, HONDA Nauty Dax, HONDA GIORCUB, HONDA APE 100, HONDA APE 50, HONDA MAGNA50
I appreciate the Lineup of each tooth number of Sprocket with old car gaiters.
The 50CCE engine was replaced by the 100CCE engine, and the Sprocket was installed to increase the speed. This type of KITACO's Sprocket has a lineup of teeth and is very useful even though it is for an old vehicle. View detail