this is really good

It's really easy to install and the wiring is neatly finished.
It is more expensive than an external product, but it is very convenient because it does not require additional buttons and is displayed intuitively on the instrument panel.
Since it can be adjusted up to 10 levels, I am very satisfied because I can adjust it appropriately --------------------------------- ------------------------- The mounting is really comfortable and the wiring is finished neatly It's more expensive than outside, but it doesn't need additional buttons , but it's really comfortable because it is intuitively displayed in the instrument panel. It can be adjusted up to 10 stages, so you can adjust it properly. Powered by Google Translator View detail

Touring Essential Items

I thought I knew what Screen could do, but once I installed and experienced it, there was no going back.
Without the screen, the 100 km/h acceleration on the freeway was an ordeal of constant struggle against the wind pressure on my body,
When the Screen is installed, the wind pressure on the body is much lessened even when accelerating at 100 km/h, of course, or even when overtaking.
The effect is immensely Large, even though it looks like a small difference!

In my personal opinion, I chose Puig's Screen out of the many available because I liked it the best.

Installation can only be done once after the Screen has been loosened, but it uses only common tools and does not require high maintenance skills.

I think the price is a little high, but I think it is cost effective. View detail

Is there a problem with being thinner than OEM?

I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance. View detail

Genuine Brembo CLutch Lever fitted to YZF-1 2003

The YZF-R1 has already got a nice Brembo clutch system and the lever had seen better days so a replacement was needed. Finding the right lever was not hard as I already had the part number from a previous purchase direct from Brembo. However, the price that I paid for that was a bit high and I was pleasantly surprised that Webike did actually stock this precise lever. I had a couple of other smaller parts due to be ordered so I got them all shipped together to save on the cost of this. EMS is my chosen courier these days as their prices are superb and the amount of time it takes for the order to be delivered is perfect. 5 days from being shipped from Webike and my order arrived successfully. All was really well padded out with bubble wrap and no damage was found. This lever did come in the Brembo plastic packaging anyway and was still put inside a nice padded envelope for safety. I have never had any issues with Brembo lever for fitment as they are extremely precision made to a very high standard. The glossy paint finish is very tactile and lovely to touch. The mechanism of the lever is smooth as you like. One very happy customer. The bike looks amazing, thanks Webike for all your help. View detail

Useful for cold season commuting

[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem. View detail

I was able to install it on my New Model XSR900 without any problems.

I purchased this product before the New Model XSR900 was released, and I was worried at first that I might not be able to install it.
I wanted to ask a paint shop to install it on my car body color as soon as possible. I didn't have the skill to install it myself, so I asked a Motorcycle shop to do it for me and the labor cost was about 5500 yen.
Before I installed this, it was a foreign-made Under Cowl, but I am very glad that I purchased it because it hides the OEM exhaust system completely, which doubles the goodness of the Parenthesis. View detail

PetitCustom

[How is it used?
It has a custom feel.
Was the one you received as per Image?
As you wish.
Was the installation difficult?
It's very easy.
How was your experience with it?
I like it at One point.
[Included Parts:were they on?
Hexagonal Lunch is not enclosed.
[Was there anything that disappointed you?
None
Other items that would be helpful
Remove Oil cap for NORMAL It is easy to install.
I wish it had come with a Wrench, but ….
The first step of the Custom project was the installation of the new system. View detail

Genuine Brembo Radial Brake Master Cylinder (19 x 20) Stock Lever

I was working on a bike that was being transitioned into a track bike. One of the first things I wanted to changer was the annoying stock master cylinder. Obviously, Brembo was the way to go. I decided on this one as it fitted with the specs of the bike in mind. Finding the correct master cylinder was not hard but there were a few choices but I went for this one in the end. It had all the requirements I needed so it went in my basket. I had a few other parts and the shipping was reasonable for what I had. EMS got my order to me in 5 days. The master cylinder came with the standard stock lever length which was perfect for my needs. It is the 19 x 20 one so works good with teh floating calipers on the bike anyway. It came in the Brembo box and also came with a few copper washers. I had already sourced teh HEL line that would make this all work. The master cylinder is a real piece of kit and fitted really well with the bike and the instrument cluster I was leaving in situ. Not a hard job once you have all the parts together. This master cylinder is awesome and so much better than the stock one. Oh and by the way, looks the nuts. Very pleased with this part. Thanks Webike for the great service you provide. View detail

Genuine Yamaha Fuel Tank Pad for MT09

This was something I had been meaning to buy but never got around to it. The correct tank pad was not hard to find, I just filtered the manufacturer and then model of bike and there were a couple to choose from. I deceided on the genuine Yamaha one as it will fit as it should do with it being made for this bike. The cost was not too bad actually and better than I had seen for sale locally. With a couple of other tank pads for other bikes, I had them all shipped together via EMS. EMS just do what they say and get your order to you quickly. Mine arrived 5 days after the shipping date which is perfect. The entire order was neatly packed in the box, the tank pads were all kept nice and flat so there was no distortion which could have been a problem when fitting. The tank pad came in a Yamaha packet and was neatly presented. The pad itself feels very nice and smooth but does have a bit of friction due to the materials used. I was expecting a slightly more domed gel pad but for what it is, it's fine for my needs. Fitting was straight forward and when on without issue although I pre fit with low tach tape to get the placement visually before starting. Pleased with the purchase and hopefully, this stops any future scuffs from happening with my jacket zip. Thanks Webike View detail

More rust-resistant than OEM Product

I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail

Satisfied with the price, although it is higher than OEM.

Easy replacement and Torque management. View detail

Peace of mind that it is made by MORIWAKI

The peace of mind of being made by MORIWAKI.

I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.

So far, no problems at all. View detail

Fits ZX-4R

It can be attached to ZX-4R without any problem. View detail

Required for Northeast Number.

The grip is so thin and natural that you don't even notice it has been replaced. View detail

Best Match for 2022SPMODEL

It is one of the cheaper carbon parts from Magical racing, but still a high-end product. The line is perfectly aligned with the top of the tank, so it does not look like an unfortunate afterthought. The 22 year color has a lot of silver area on the tank, so it looks tighter with the new parts.
I can especially recommend this for the 2022-2023 SP body. View detail

Recommended for those who are concerned about stopping posture when using Lowdown Link!

I installed a Y's Gear Lowdown Link when I purchased the vehicle, but when parking Standing still. I was always concerned about the posture of the
I was considering modifying the OEMSide Stand, and when I saw a post on Impreza about a person who had similar problems that were improved by installing this product, I immediately purchased it.
Installation is also easy if you are confident in your arm strength.
After installation, I feel very secure when parking the car.
The precision of the product is comparable to OEMParts and is not different at all.
I would recommend it to anyone with similar problems. View detail

I am very grateful for this season!

My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.

Having said that, I have been able to spend this winter more comfortably than if I had nothing on! View detail

Genuine Gilles Tooling Brake Fluid Reservoir Cap

I wanted to smarten up the bike with a few Gilles Tooling accessories and this was one I wanted. It is the rear brake fluid reservoir cap. Finding the right one was not hard but I did need to go through Gilles website and search that way. The price Webike had at the time of ordering was really good as they did have a sale on. With a couple more accessories I got all my order shipped together, this saves shipping costs on smaller items. I use EMS these days as they just get my orders delivered as soon as possible. The order was delivered in 5 days from shipping so you can't get much better than that. The order was well packaged and although the Gilles cap was in it's own well protected box, Webike took the time to make sure that there could be no damage to anything. A lot of bubble wrap was used which was great. The cap itself is a very very well machined part. The threaded section is super smooth, there is also a set of coloured rings you can use to put in the cap which might match your bike colour scheme. Very nice touch. A word of warning though, once you home the coloured ring you will not get that out without making a mess so choose wisely. Not a problem if you intend to keep the colour ring in place of course. I chose the red one btw. Anyway, there was not a problem fitting the cap as it literally just screws onto where the OEM one goes, that's it. Very pleased with the purchase so thank you Webike, very happy customer. View detail

I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between lef

I purchased 2 of this product. However, it is oriented in the same direction. Does this product have no distinction between left and right? View detail

Large satisfied

I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail