Reviews
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
Oil change essentials
It works fine
The brand is made in Japan, so it can be used with peace of mind, even when OEM products are not readily available.
The price is a little extravagant, but I would like to have a different filter for each oil change.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Installed on a 2011 CBR600RR.
According to the Webike system, the CBR600RR is compatible with the 2023 CBR600RR and GH10 130mm Type, but the year is not shown in the Others section. I measured the actual length of the grip and it was exactly 120mm, so I chose the 120mm type.
The installation was done by a nearby store using PITService, but this 2011 CBR600RR requires the tank and air cleaner to be removed and the carburetor side to be loosened in order to remove the thailand part of the accelerator wire. Therefore, it seemed to be quite a lot of work. (I had given up on installing it by myself because I had gotten the information beforehand.)
It heats up immediately after turning on the power and it is hot when the power is at 100%. It is very comfortable.
I was also concerned about mishandling of the Blinker, but there seems to be no problem.
Grip diameter is no different from NORMAL. The surface pattern is also within the safe range.
The motive was that I did not want to wear thick Winterhoof Gloves, but this would be Large length even with thinner Gloves.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
I should have put it on sooner.
I used to switch from one Gloves to another, but I took the plunge and bought this one. I had no idea they were so warm. It's hard to put on, but it works great. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M
Yamaha Crank Case gasket
Spare for my bike due to slight accident where a rock hit the sump. Not a massive leak, but enough to warrant a replacement gasket and investigation. The part was pretty easy to find with the tools Webike supply for manufacturer links etc. Luckily, this part fots a few Yamaha models and therefore readily available. The cost was really good, I mean really good. My local dealer was charging a lot more than this from Webike. I usually always have more than one part in any order which cushions the shipping. I used Fedex Express this time and the order arrived with me within a week of ordering. The box was very well packaged and sealed from the outside on every edge so nothing could escape in transit. This has happened with other suppliers and gaskets before. Not with Webike. Everything was packed out in teh box and any empty space was filled with bubble wrap and air pockets. The gasket, with it being a weird size needed to be kept flat and this was the case with this order. It came on it's own cardboard backing and Webike even put an extra piece of cardbaord on teh front so was very well protected on all sides. The gasket is clearly very well made by Yamaha and no bends or problems with it at all. No sharp edges and seems really tough. Fitted relatively quickly but you mustn't rush when it comes to gaskets as the last thing you want is to have to seal it all again. Once fitted, there is no leak even though it was only a seap really but nothing at all once the new gasket was fitted. Very happy customer. Thank you Webike View detail
![Brake Pads ROAD [SA]](https://img.webike-cdn.net/catalogue/images/114748/Road-SA_TS.jpg)
Fits: YAMAHA TZR250, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA TRACER9 GT, YAMAHA TMAX 530, YAMAHA TMAX560, YAMAHA TMAX 500, YAMAHA TDM900, YAMAHA TDM900 A, YAMAHA ROAD STAR, YAMAHA ROAD STAR MIDNIGHT, YAMAHA MT-10, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA MT-09 SP, YAMAHA FZ1-S, YAMAHA FZ1-N, YAMAHA FZ-6
Excellent pads
I have owned a fair few bikes in my time and still do. Because of this fact I have also trued a lot of different branded brake pads. For the last few years I have been using Brembo. On all my bikes and I also recommend to others. You just know what you are getting with Brembo. This set are for my Yamaha Yzf R1 2017. Really easy to find which pads you need for your bike. Just go to Brembo and input your bike details. Great price and a little better than I can get from here in the UK. As I always order multiple items per order the shipping was really good value. I used FedEx Express and the order was delivered to my door within a week.all items in the order were packaged really well and any spaces in the outer box wee filled out with extra padding. The pads came in their own packet which was sealed. The pads are just awesome. These will make you stop far better than some other brands in the same price range. Just buy them and don't worry, you will stop. Thank for the great service Webike. Fantastic. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
2019 C733A V-strom650 with
Grip length 120mm, just fit, no discomfort in thickness
Easy to handle on the Throttle side during installation
If I wanted, I would like to have waterproof property in the Connector.
If the Switch has a Click feeling, even better, the Switch can be shifted up or down slightly to reduce misoperation.
View detail
Refreshed
There is nothing wrong with the product at all, but it takes a lot of time to remove the OEMBlinker from the Fender. It is faster to disconnect it. View detail
Fits: YAMAHA TDM900, YAMAHA NIKEN, YAMAHA MT-10, YAMAHA NIKEN GT, YAMAHA MT-10SP, YAMAHA MT-09, YAMAHA FZ8S, YAMAHA MT-07, YAMAHA MT-09 TRACER, YAMAHA FAZER8, YAMAHA YZF-R1M, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA XSR700
Sunstar sprocket
Great looking sprocket. Cant wait to install it on my bike together with the rest of the chain sprocket. The design with the hole makes it way lighter than stock. Great combination. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Purchased for installation of Grip heater
[How is it used?
Purchased for installation of Grip heater
Was the installation difficult?
Easy
How was your experience with it?
Best?
[Was there anything that disappointed you?
Nothing.
It was very easy to take out the power supply.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
Installation itself is easy; Wiring is asked to Sense.
The installation itself is simply a matter of removing the Tandem seat and inserting it into the Stop-lamp Connector. If you want to use the power supply for charging a smartphone or other devices, you need to bring a charging socket or other wiring around the handlebar. It is dangerous because the wiring may be shorted or melted by heat. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Is it malfunctioning?
Even though the power supply is connected from 5A for YamahaOEMHarnessGrip warmer, it is still slightly warm to the touch with bare hands?
(stopped) is about
Maybe you pulled a HaGap.
I also use YamahaOEM with nmax and DINK with Endurance's Grip heater and it warms up well.
It's rather hot with bare hands.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000F, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-S750, YAMAHA YZF-R1M, YAMAHA YZF-R1 , YAMAHA YZF-R6
For Grip heater power supply.
Easy installation by simply popping it into the harness of the Tail lamp.
The size of the Bullet Terminal and the Grip heater side did not match, so only the Bullet Terminal was replaced.
It's working fine
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
winter helper
My motorcycle is YAMAHA XMAX300. I always wanted to modify a heated handlebar. I was afraid of buying bad products on other websites, so I bought this KIJIMA heated handlebar on webike. This heated handlebar supports Various types of motorcycles are installed, and the installation is easy. It should be noted that professional wiring is required. After the actual experience, the heating effect is very good. -------------------------------------------------- -------- My motorcycle is YAMAHA XMAX300. I have always wanted to modify a heating handle. I was afraid of buying bad products on other websites, so I bought this Kijima heated handle on Webike. Various models of motorcycles are easy to install. It is important to note that professionals need to be wiring. After actual experience, heating effect is very good. Powered by Google Translator View detail
Fits: KAWASAKI Ninja ZX-25R, SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, YAMAHA YZF-R1M, YAMAHA YZF-R6, YAMAHA YZF-R1S, YAMAHA YZF-R1, KAWASAKI Ninja ZX-6R, BMW S1000RR, BMW S1000R
Just replace with OEM
All you need is a Torque wrench and a Socket to remove and attach the OEM. View detail
Fits: YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA MT10, YAMAHA MT10
Genuine Yamaha air filter
I have had other air filters before and not been overly impressed. Decided to go for stock genuine Yamaha for a change. This part has already been superceded so should be pretty good. The price was really good for genuine Yamaha and as I had otehr items in the order, the shipping was cushioned somewhat and very reasonable, Delivered by Fedex Express within a week of placing the order. After removing most of the top body work, the air filter is relatively easy to install, it's putting everything back which is a pain. The filter itself looked really good and a proper piece of Yamaha. Very happy with this item. Thank you Webike View detail
Fits: BMW S1000 R, BMW S1000 RR, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, HONDA CBR1000RR FIREBLADE SP2, HONDA CBR1000RR FIREBLADE, HONDA CBR1000RR FIREBLADE SP, KAWASAKI NINJA H2 SX, KAWASAKI NINJA 1000SX, KAWASAKI VERSYS 1000, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI Z1000SX, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX636
very good
When I bought Puch's Engine Cover in the past, I was treated to the foreign quality of Puch's LogoSeal being applied on the opposite side, but this product is as good as I imagined Parenthesis to be.
The city is full of PremiumZones, so it is very good for those who want to do a different Custom, and honestly, this one is Parenthesis (personal opinion).
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1S, YAMAHA YZF-R6, YAMAHA MT-09
MT−09 SP 2022MODEL does not have a clutch lever
MT−09 SP 2022MODEL does not have a clutch lever.
The clutch lever itself attaches, but does not hit the clutch switch.
MT−09 SP's should quit buying.
I can't return it because I installed it, and I lost almost 2,000 yen.
U Kanaya is better. COSPA is the best
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
KIJIMA Grip heater GH10 120mm with built-in switch
[How is it used?
It was installed in preparation for winter.
Was the one you received as per Image?
The grip system is thin at 32mm, so it is not much different from the OEM grip.
I did not feel any discomfort in the grip.
Was the installation difficult?
Clutch side is very easy, Axel side is easier to replace from OEMThrottle pipe once handlebar is removed.
How was your experience with it?
Level3 with 60% output (Color):(Yellow) for about an hour and it is quite warm. It also seems to warm up very fast.
I thought it would be difficult for my thumb to reach the Blinker, but surprisingly it did not get in the way.
The switch is also moderately large and can be switched while driving.
[Included Parts:were they on?
There are three types of ThrottleAdapter, but ThrottleAdapterC is used for CBR600RR (PC37).
OthersAluminum tape, spacer, and bar end cap are included.
[Was there anything that disappointed you?
Nothing in particular at this time.
View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Rider foot peg lefthand side
My left hand side foot peg was a little tired and scraped up so decided to buy genuine Yamaha new one from Webike. The part number was easy to find via Yamaha Part Catalogue which can be viewed online. Webike price was really good and better than I could get in my home country so placed my order. The shipping was very reasonable but this was cushioned a little with other items in my order. It took just over a week to arrive, 8 days total including a weekend. The package was very well padded out so no damage to the items inside. Very well finished by Yamaha. A very shiny and smooth foot peg now. Fitted really easily and looks the business now. Thanks Webike for the great service. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1
Rider foot peg right hand side
My right hand side foot peg was a little tired and scraped up so decided to buy genuine Yamaha new one from Webike. The part number was easy to find via Yamaha Part Catalogue which can be viewed online. Webike price was really good and better than I could get in my home country so placed my order. The shipping was very reasonable but this was cushioned a little with other items in my order. It took just over a week to arrive, 8 days total including a weekend. The package was very well padded out so no damage to the items inside. Very well finished by Yamaha. A very shiny and smooth foot peg now. Fitted really easily and looks the business now. Thanks Webike for the great service. View detail