Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
Good when changing tires
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Genuine Yamaha Circlip for FZ6R 2014
As with when ever I change out bearings regardless of where, if the circlip is also available, I do tend to change these out too. No point putting a previously removed circlip on a new build. Yes, it might look ok but the tension is never going to be what it actually should be. So, finding the right circlip was as straight forward as finding the bearing. Using the tools Webike provide on their help pages and cross referencing for my own peace of mind on Yamaha schematics. The price was excellent as expected. With some other parts for this bike in my basket already, I had them all shipped together to save a little shipping fees. EMS is my courier of choice as they just get the orders delivered fast with no fuss. Upon arrival, the box was well packaged and all the smaller parts were individually packed for safety. The circlip came in the standard Yamaha packet. Not really much I can say about this circlip, it is well machined, the perimeters are within spec. The quality is plain to see but until you attempt top put it in place, you are never going to know how it fits. With no issues on the install, I can say, this is a top quality part and that was the finish of the main bearing in the transmission replacement. Very pleased with the out come, the engine sounds healthy once again. Thanks Webike. View detail
Genuine Yamaha Transmission Oil Seal for FZ6R 2014
Whilst I was fixing the faulty bearing in the transmission I always change the circlip and oil seal as this is regularly deformed during removal. No point in trying to put a bad old part on a newly fixed bearing or you are going to have all kinds of issues in the future which will undo all your good work. Finding the right oil seal was straight forward using the tools Webike provide and cross referencing with Yamaha schematics. The price is really good value and along with some other parts for this bike, the shipping was good value too. EMS is my chosen courier and my order arrived swiftly in 5 days from being shipped. The oil seal came in the standard Yamaha packet and was inside a bubble wrap envelope for security. The oil seal itself is not really much to look at but you can see the quality is there from the off. There are no strange rubber extras attached as you see in some seals. It has a good amount of flexibility. But sturdy enough not to just rip upon install. After the overhaul of the main transmission bearing, this was a straight swap out. Thanks Webike, very pleased. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Too bad …
Unfortunately, the hole diameter is not suitable for the 91 SR. If you are considering purchasing the Short Stand, you do not need to purchase it, as it can be attached to the original Spring without it. View detail
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Genuine Yamaha O-Ring for water pump for YZFR1 2003
Genuine Yamaha O-Ring for water pump for YZFR1 2003 This O-Ring also needed replacing for the water pump on the YZFR1. The part was super easy to find witht the help of the tools available on Webike. The price was brilliant and even though it's only an o-ring, would you really want to risk a pathetic aftermarket one which will bring your riding to a halt... no. So, this was also ordered along with a few other parts and the shipping was very good indeed. I used EMS fast service as they do exactly what they say they will, deliver FAST, the end. Arrived with me within a week of ordering all the parts needed. All packaged really well as expected and any space in the box was filled with bubble wrap and air pockets to protect any smaller and more delicate parts from damage. I now it is just an o-ring but this is an important one that you should be careful with. When I opened the packet, the o ring was perfect, no tears rips, loose pieces of rubber or anything. Yamaha really do know how to make o-rings. It was a nice smooth surface and was flexible but not too much as this could also cause issues. Yes, I have made the mistake of buying cheap alternatives before to my detrement, just ended in disaster and had to get an OEM one anway, just do not waste your money on the cheap crap. Stick to getnuine for these things. Fitted easily and I hope the rest goes together with such ease. Very pleased with my purchase and from now on, I will ONLY buy genuine OEM for my baby. Great service Webike, thank you very much View detail
Genuine Yamaha O-Ring for FZ1 2006
This FZ1 2006 has an issue with the water pump. There was a noticeable leak happening and eventually found the culprit. It was the oil seal inside that failed. I found the correct part number by checking Yamaha schematics for this model and year. Not particularly hard and I got the right one. The price Webike had this oil seal for was really great and better than my local Yamaha dealer could do. With some other parts in my order, all were shipped together using EMS. The order arrived in 5 days from shipping which is usual for EMS, they just get your order delivered. The parts were well packaged and no damage was sustained during transit. The oil seal itself was in a Yamaha packet. It is a well pressed oil seal with no visible debris or extra rubber which would cause problems where it needs to go. It is pretty rigid but had some flex to it which came in handy whilst seating it correctly. Now all done, the water pump works as it shopuld and there are now no leaks at all. The coolant is a healthy temp and all is good. Thank you Webike, very pleased with purchase. View detail
Genuine Yamaha Cotter Valve for FZ1 2006
I was doing a full valve rebuild on this FZ1N 2006 and needed the cotter valves as I did not have these is my garage. I did struggle to find the parts actually available locally so I decided to get them from Webike. I found the parts pretty easily as I already knew the other parts needed and had a schematic for the rest. The price Webike had these for was really good value. With a few other parts in my order, all the items were shipped together with EMS and arrived in perfect condition in 5 days. The packages were all individually packed in Yamaha envelopes and stapled together so I did not lose any in the box. The valves are really small parts and can become damaged if not well protected during transit. Webike have this part spot on, very well packed out with padding. The valves themselves are brilliant quality and you can see this from the machine work that has gone into them. Crisp and clean and no weird shards of swarf on them at all. Just got to get around to fitting this all in with a busy schedule now. Very pleased with the purchase for the 4 cotter valves. View detail
Fits: YAMAHA FZR1000A, YAMAHA FZR1000AC, YAMAHA FZR1000B, YAMAHA FZR1000BC, YAMAHA FZR1000D, YAMAHA FZR1000DC, YAMAHA FZR1000E, YAMAHA FZR1000EC, YAMAHA FZR1000F, YAMAHA FZR1000FC, YAMAHA FZR1000G, YAMAHA FZR1000GC, YAMAHA GTS1000AE, YAMAHA GTS1000AEC, YAMAHA GTS1000AF, YAMAHA GTS1000AFC, YAMAHA YZF1000RJ, YAMAHA YZF1000RJC, YAMAHA YZF750 (YZF750RJ), YAMAHA YZF750 (YZF750RJC)
Genuine Yamaha Cylinder Head Gasket 2 for YZF750 1997
This bike was desparately in need of a new gasket for their YZF750 as the previous owner just did not keep up with maintenance at all. With it being an older mid sized bike, they do take a bit of work during riding but up keep is no excuse. Not a big deal. I found the correct part number from Yamaha schematics etc. Webike price was really competitive too. A few other parts with this were ordered together by EMS and delivered in 5 days. All my order was delivered with no issues, all the gaskets were kept flat so not to damage. This gasket is not a big one but it does have some intricate details that need to be correct to fit the cylinder. You can see it has been manufacturered the right way and not cheaped out on it. It is sturdy and has a slight flexibility. All the holes aligned with the fitment and went on pretty easily too. Fitted quickly but precisely in just under an hour with everything else put back together. Very pleased with this one, the bike does sound a lot better and I know it will last a fair few years to come. Thanks Webike. View detail
Genuine Yamaha Fuel Tank Mold for YZF-R1 2014
This bike came in for some much needed maintenance and to find out why there was a weird knocking from under the fuel tank. After some careful inspection, it was found that the original mold that help prevent vibration from teh fuel tank to the frame had been torn and deteriorated somewhat. The only reasonable solution was to get a new mold for it. It is essentially some thick shock absorbing foam. Not totally unique but worth the effort to refit some new to remove the origianl issue with vibration. Finding the correct damper part number was super easy by using the tools Webike provide from their help pages with links to big manufacturer websites and schematics etc. Easy really. The price from Webike was better than my local Yamaha dealer could do and along with some other parts for this bike, I had them all shipped together to save some money. EMS was teh courier I used as they just get the job done right first time. My entire order arrived in 5 days from order shipping. Perfect. The part came in the generic Yamaha packet. The foam/damper is a nice flexible piece. Seems to be more rigid than standard damper foam and worth the money to get OEM in my eyes. I even used the one full piece in 2 sections for either side of the fuel tank. There is some excess for just the one side anyway. Worked a treat and now there is zero vibration or sound when riding. Very happy with this easy fix and the help Webike provided with my order. View detail
Genuine Yamaha Gaskets for MT07 2020
I wanted to get a few of these for future projects and it just so happened that one of these was also needed for the rebuild job on the MT07 2020 that had an accident and needed sorting out. This gasket was for the water pump to keep it from leaking. Not really a hard part to find as this one like a lot of other gaskets from Yamaha do fit a host of other models. This is why it is good to get more than one when I order from Webike. The part was easy to find using the tools Webike provide in their help sections and then if you like to cross reference, do this via Yamaha schematics. Simple. With a lot of other nuts, bolts, washers and gaskets needed to complete this rebuild, I had a lot of the parts shipped together to save me on shipping cost. When you add a few other parts, it really does work out cheaper in the long run. Also, EMS saves me time by shipping in a efficient manner and gettting my order to me fast. In 5 days from shipping, my order arrived. All my parts were in great shape, no damage caused in transit at all. I am not surprised really as Webike warehouse do a cracking job at packing the orders well. I got 5 of these washers and each came in a Yamaha packet. The gaskets are I think, copper but may be a composite but defintiely have copper in them. These are perfect as copper is a soft metal and will crush down to hold a tight seal. Exactly what you want for a water pump. Very pleased with the purchase and the gaskets are super nicely machined. Great work Webike, thank you. View detail
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA FZ750N, YAMAHA FZ750U, YAMAHA FZ750U, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA TDM850, YAMAHA FZ-6 (FZS6V), YAMAHA FZ-6 (FZS6VC), YAMAHA FZR1000A, YAMAHA FZR1000AC, YAMAHA FZR1000B, YAMAHA FZR1000BC, YAMAHA FZR1000D, YAMAHA FZR1000DC, YAMAHA FZR1000E, YAMAHA FZR1000EC, YAMAHA FZR1000F, YAMAHA FZR1000FC, YAMAHA FZR1000G
Genuine Yamaha Clutch Friction Plates for FZR6 2014
Time for some new clutch plates to help complete this part of the overhaul. This order was for 2 of the clutch friction plates, I did not purchase the full set of these as it was clear that only 2 were needed. I was very pleased to see that Webike could actually get these for me. The price was really good and for the set was far better than I could source locally here in the UK. The other steel plates were already in my basket along with the new springs and this meant ordering them all together actually cut down on the shipping per item. I do use EMS for the delivery as they just get the order delivered quickly. Arrived in less than a week. All the plates were packed really well and extra bubble wrap was added to the box to fill any space. Everything arrived in one piece with zero damage. No point in trying to save money and getting after market clutch plates as they don't last as long as OEM ones. The plates had a nice sharp but not dangerous macinging on them and very precise and perfectly to the tolerances on the manual. Fitted really well and pretty quickly, ready for the season. Thanks Webike, great job. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
First DensoPlug
NGK had always been the supplier, so I replaced it with NGK for a trial.
It is not something that can be felt, but I think the starting performance is good.
We believe that Premium components have an added peace of mind fee that regular products do not have, so those who think they are Waste should not buy them.
I like the fact that Gap management is not required.
View detail