Reviews
It's worth the price
I think it is a good product. The only thing that bothers me is that the hole for the lock in the back is hard to find. My concern is that it will deteriorate over time. View detail
Cost performance!
It is a normal oil filter, no oil leakage and comparable to OEM. Cost performance is good. View detail
I expect it to be durable.
Replacement from Windshield IRIDIUM.
I don't feel much acceleration performance in city driving.
Idol I am looking forward to increased fuel efficiency and durability.
View detail
Genuine Yamaha Starter Relay for FZ1 2008
There was a slight issue with the bike starting and after a lot of investigation the problem turned out to be the starter relay. Apparently, this is a part that does fail over time and given that this bike is over 15 years old it was ready. Finding the correct part was not particularly hard as I use the tools Webike provide and then for my own peace of mind, I cross reference with Yamaha schematics. The part was a lot cheaper from Webike than I thought it would be and better than my local Yamaha dealer could sell for. With a few other parts in my basket, the order was shipped using my preferred courier, EMS. The reason for using EMS is that they just get the job done in quick time. My order arrived with me in 5 days from shipping which is great. The order was all carefully packaged and the empty space was filled with packing materials so nothing could move or get damaged during transit. The starter relay came in the Yamaha box and although the box has signs of bends, the relay itself was perfect. Not a part I would say you could judge quality for. It either works or it doesn't. In this case, it worked perfectly as expected. The fitting was a little fiddly but not too bad really considering. The bike now starts easily and firtst time. Very pleased with the purchase and the service Webike provided. Thanks guys View detail
Fits: SUZUKI GSX-R1000, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R25, YAMAHA YZF-R3
Not compatible with YZF-R1 15-.
YZF-R1 Year:98-21, but not compatible with 2017. Probably not compatible from 15 years.
It is a strange conformity notation if you think about it, but I bought it without realizing it.
To begin with, the YZF-R1 (2015-) is a 5-hole, but this product is a 6-hole.
Please be aware that if you are from 2015 or later.
View detail
Can be used in the same way as OEM Parts
It is fully compatible with OEM parts and can be used without any problems. View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI D Tracker X, KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KLX250, KAWASAKI KSR110, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZ6 04-17, YAMAHA FZ6-S Feather, YAMAHA FZ8, YAMAHA MT-01, YAMAHA MT-07, YAMAHA MT-09, YAMAHA TDM900, YAMAHA V-MAX 1680, YAMAHA WR250R, YAMAHA WR250X
I wish it was 10mm diameter.
Purchased to replace LED Blinker.
Maybe it's compatible with Yamaha stuff or something.
Since I could not be sure, I bought a DRC product that I could be sure of.
This product is used between two pieces, so the front and rear blinkers are interchangeable.
2Quantity:Set is required.
Since the mounting hole of this product is 8mm diameter, the Screw diameter of the Blinker to be installed is also 8mm diameter.
The 8mm blinker is used, but there are surprisingly few 8mm-diameter blinkers.
The problem is that most of the products sold at low prices are 10mm diameter and there are very few options.
View detail
lightweight
I purchased the SUNSTAR RK-102-41 for my YZF-R25. I have been using the 41 for my Driven Sprocket, so I decided to use the same one this time as well. View detail
Trust Brand
Trust Brand
Moreover, it is cosmetically pleasing.
View detail
Refreshing appearance
I originally used Hook bolt, but bought CrabHook because I thought it looked more Refreshing.
I installed it immediately and it is working fine.
It looks Refreshing and I like it very much.
View detail
Reliable OEM
The XSR900 is the first DIY replacement.
There were cheaper filters available, but we went with OEM for reliability...
Well, I guess it's a matter of mood (chuckles).
View detail
Fits: YAMAHA XSR900, YAMAHA MT09SP, YAMAHA XSR700, YAMAHA MT-07, YAMAHA MT09, YAMAHA MT10SP, YAMAHA YZF-R6, YAMAHA MT10, YAMAHA YZF-R1
Used for footpegBolt
Cost performance is poor, but the texture is good! View detail
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
Master cap
One point Green Light is good. View detail
One point fashionable
It looks so much better.
Very nice for a little accent around the Handlebar.
View detail
Purchased with Rear disk rotor
I bought it together with brembo's rear disk rotor when I purchased it.
I haven't installed it yet, but I have no complaints about the quality and appearance of the product.
I will make an impression when I install it again.
View detail
I'm not sure what the difference is.
I have been using Iridium plugs.
I did not feel any difference in my experience when I switched to this Plug.
I will use it for about 10,000 km since it seems to be sold as "long life".
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, SUZUKI GSX1300 R Hayabusa, SUZUKI GSX-R1000, HONDA CBR600RR
Material:Aluminum and high quality product.
[How is it used?
I installed the Mount bar on my SEROW250 and it was so convenient that I wanted to install it on my SV650X.
I knew that SV650X can use Stem shaft fixed type as well as Mirror Holder installed type because of Separate handleType, and I thought it would be better to use Stem shaft inserted and fixed type. I found this product on sale, so I jumped on it.
How did you like it?
The bar is made of machined aluminum, so it has a sufficient texture. To be honest, if you attach a smartphone holder with a large size, you will not be able to see the bar part, which is a waste of space.
I bought the Silver one because the Black one was temporarily out of stock at the time of purchase. I am satisfied with the functionality of the product.
The product was more than Image.
How did it compare to other products?
This type is inserted into the hollow part of the stem shaft and fixed with a bolt, so it looks like a reflex.
The price is relatively low because it is on sale, and the quality is perfect, so I feel that Timing did a good job in purchasing a good product.
[Points to note]
The bolt for fixing is included in the package, so you may be able to adjust the height by inserting the collar up to 10mm.
Quantity in an easy-to-use Position:Once set, please tighten it firmly and securely with the proper Torque. (This is a testimonial.)
Other items that would be helpful
The deciding factor in the purchase
Material as mentioned above.:The deciding factor was the Reasonable price for an Aluminum Mount bar.
【Included Parts:presence or absence】.
Quantities of Mount Bar Body, Aluminum Collar to insert into the Stem shaft, Bolt and Nut for fixing, Fixing Collar with large outer diameter by tightening, and Instruction Manual.:Set
[ITEMS TO BUY TOGETHER
Products to be installed on Mount bar.
If you purchase the products you want to install at the same time, such as a power supply outlet, Smartphone Holder, Drink Holder, Camera Mounting Holders, etc., you can proceed with the work at a stretch.
Opinions and requests to Manufacturer.
This was my first time using Manufacturer's products and I am very happy with them. Good products at affordable prices. Thank you in advance.
View detail
Fits: YAMAHA MT-10, YAMAHA YZF-R1, BMW S1000RR, HONDA CBR1000RR, BMW S1000R
Easy detachment!
Rather than a rear slider, the Axle Shaft was installed to make it easier to attach and detach the Axle Shaft.
It can be used as a handle like Doorknob when pulling out shafts, and when inserting shafts, the triangular pyramid shape makes it easy to insert the color, etc. without resistance.
Of course, it would also serve as a Slider, but currently it is benefiting from the detachment process.
View detail
Increases the sense of Hold.
Compared to OEM, the tank shape is raised so that the body can be held without moving too far forward when breaking.
The use of a tank pad will further reduce slippage and increase the hold feeling. It is especially recommended for those who run Circuit with GunGun.
View detail