I was able to exchange easily and have a good feeling about it.

Wiring connection is troublesome because it requires a solder, so it would have been nice to have something like a crimp terminal. View detail

It's pretty good!

In my previous motorcycles, when I opened the seat, the handlebar interfered with the seat and tore the seat, so I bought this to reinforce the seat in advance. I was a little worried because of all the comments I had heard about the seat, but when I tried it on, I was able to install it without too much trouble. I like the YAMAHA ?Logo on it, it's fashionable. View detail

Gamaguchi Clip

The clips are too large for motorcycles and may or may not bite, depending on the type of car. Also, I think it depends on how long the battery lasts. View detail

Large Kimono

I think one of them is small, but you can make it large with a zipper, so there are plenty of room for everyone. View detail

No dramatic changes.

It is the same length and construction as OEM, but the wire itself is multi-twisted to ensure flexibility. It may be because it is brand new just after the replacement, but when you grip it slowly, you can see that there is no roughness. The gripping force remains the same.
I think it would be good if the product could be used for a long time without any roughness.
The first time it arrived, it was triple-tied and bent at a tight curvature, so I requested a replacement because the bagging method does not take into account anything in terms of product characteristics. I requested a replacement because the bagging method does not take into account the characteristics of the product. View detail

What is the cospa?

It takes less than a minute. Just snap it on. The effect is good. However, the material and texture are not worth the price. I guess it's just an imported product. Well, it's an imported product, so I guess it can't be helped. View detail

Ponting and Custom

The overall construction is solid, and the welding and surface treatment are clean.
If you have a Hexagonal Wrench Set and a Driver, it will take about 30 minutes to complete.

There were no pictures of the inside in ManufacturerSite, so I personally used a mesh filter to prevent Garbage suction. (Gold web) DIY.

So, I personally ??Minus1. View detail

Appeal to appearance and surroundings (As a safety measure)

The sound will be a nice Appeal (laughs).
I used MORIWAKI muffler on my previous LEAD125 and I like the sound, look and feel.
If you expect it to run well, you can replace the Weight Roller at the same time for a good driving experience! View detail

Mounted on HondaCL250

When not installed, I tried driving on the New Tokyo Highway at over 100 km/h. The vibration was so strong that I thought the car body might break. The vibration was so strong that we thought the car body might break, so we gave up flying because we felt sorry for the motorcycle. After that, we installed this product and drove on the same route. Although the vibration was not zero, I was able to run at 120km/h in a stable manner. I can bank the car on the mountain pass without any worries, and I can drive at a higher pace than before with a good feeling. This is just an amateur opinion! (Lol) View detail

Purchased for LenBarrelMotorcycle

I gave up my own Motorcycle when I turned 70, but I occasionally participate in Touring with Len BarrelMotorcycle.
LenBarrelMotorcycle's Option Smartphone Holder is hard to see, so I bought this product, which is easy to install without tools.
I was invited to Touring, so I immediately installed this and went Touring.
It was easy to install and secured securely to the Attachment Bar. It was easy to fix the phone with One-touch and I am glad I purchased this product.
We would like to see durability in the future. View detail

KIJIMAFrontReachSeat

I used to ride with a GelCushion, but it used to be a hassle with gapping, etc. The Cushion is no longer necessary, and the seating has become more comfortable.
Regarding the installation, there is too much play in the claws that insert into the body, so some modification is necessary, such as covering the claws with rubber material. I would like you to improve this part. View detail

DriveRecorder in case of emergency - works fine on CB1100.

[How is it used?
I was looking for a DriveRecorder specifically for two-wheeled vehicles in case of emergency, and I purchased this DriveRecorder because of its stability and ease of operation.

Was the one you received as per Image?
The Body and Camera are smaller than the Image, which is nice and unobtrusive.

Was the installation difficult?
There were many wires, and I struggled to understand them only with the Instruction Manual.
In particular, there is no sufficient explanation in the Instruction Manual, even though there are two Wiring in Black color, one long and one short. The long one is a +Wiring to ACC and the short one is a − Grounding Wire, which I almost broke.

How was your experience with it?
The camera is still in a temporary state of use, but there are no particular problems with its practical Level. The image quality is not the highest compared to the current models, but with 3 million pixels, the number of the other party can be determined.
The front and rear cameras can be used to drive safely when touring.

[Included Parts:were they on?
In addition to the Instruction Manual, all necessary items are included:Body, 2 Cameras, 2 Extension Cords, GPS, Controller, MicroUSB cord, MicroSDCard, Noise Cancelleretc.

[Was there anything that disappointed you?
The foundation of Camera is Material:Some parts are a little cheap, such as Plastic.

The low-priced version of Scauper Pio is still being sold, but the internal battery in the body cannot be replaced and the time is reset, so this one with GPS is more convenient because it automatically adjusts to the time. View detail

Best Matches

It is for a CUB, but fits perfectly in Endurance's CenterCarrier. I put my Rain jacket, Goggles for the night, and charging cable in it. However, when refueling, the Seat closes, so you have to hold the Seat with your left hand while refueling with one hand, or with your shoulder while supporting the Seat with the other hand lol. View detail

Classic and cool.

Installed on SR400Final edition.
It fit without any problems.
Anyway, I am very happy with Classical.

I installed the Side Back on the Left Side, but the Back interferes with the Chain.
I gave this place 4 stars because it was unexpected.
Even with that, I am very satisfied with the product. View detail

enchanting (Lol)

It was the first time I tried to replace the Exhaust System by myself, but I managed to complete it.
The Style has tightened up a lot!
I just couldn't get ECUReset to work. ( Nope.) Siksik…⇒ I'll have it looked at at my next inspection.
The sound in general was LARGER than I had imagined.
We live in a residential area, so we have to be careful about the sound of iDrink (especially in winter).
Sound is satisfied. View detail

MAXAMFront wheel Disc Rotor

When I got the MAXAMFront wheel and tried to install it on MAJESTYC, I realized that the MAJESTY and MAXAM discs were not compatible, so I had to order one in a hurry.
I chose it for availability and price because I don't think there is any need to be concerned about OEM for a street-use scooter.
The entire DISC is still machined, so discoloration around the hub is a future concern. View detail

MAXAMRotor bolt

Bolt was replaced along with Disc Rotor replacement.
I originally intended to reuse it, but purchased it because the Hex hole was deformed into a gouge.
Quantities of 3-packs:Buy 2 sets
Since it is a KITACO product, quality should not be a problem. View detail

Repair Parts was a great help!

I broke and obtained the already discontinued Square LCD Speedometer & Tachometer's Gold Genus Reactive Speed Sensor.
I am glad to hear that you are now safely posting speeds. View detail

Series that are not easily found in stores.

Just right for 178cm 75kg. Sleeves are a little long.
I'm a little bothered that the cuff zipper tends to open when the Gloves are put on.
Sleeve Mesh is cooler than expected and looks good in midsummer.
Sleeves can be removed.
I think I can wear it except in the middle of winter, because I can put a layer of Uniqlo Ultra lightDown inside.
Gun metaLogo is more assertive than the image, so I felt it was just right in my opinion! View detail

Appearance and functionality

There is no rattling, the lever can be adjusted securely, and the grip, texture, and price are all good for this type of product.
If I had to say so, it would be better if it had a parking function!
There are a variety of inexpensive products on the market, but after much searching, I am glad I chose this product. View detail