Reviews
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Cospa strongest
It is now so bright that it is dazzling.
Recommendation.
Commendation for commuting to work and school
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's still bright.
The headlight is dark and I had been holding back because I had read that Halogen bulbs would melt the lenses. I had to remove the Valve Reflector, but it can be removed by removing one screw from each of the screwdrivers.
It is still totally bright. The low power consumption eliminates flickering even when Idling.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I finally see the road!
I'm useing for Honda Giorcub, but the headlight bulb was too long, and I cut the end. Not heating, not flashing. It1s very good for my bike. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
After cutting, I put it in.
I removed 3−4mm from the last conical section to avoid putting it in Original's Light. Glass is still touching, I think 5mm is better.
Socket fits, brighter than OEM, light flickers while idling.
View detail
Fits: HONDA NE50 Tact, HONDA XR50R, HONDA Gyro X, HONDA Super Cub 50 Super Custom, HONDA Super Cub 50 Standard, HONDA Super Cub 50 Deluxe, HONDA Super Cub 50 Business, HONDA Super Cub 90, HONDA Smart Dio, HONDA Smart Dio DX, HONDA Zoomer, HONDA APE100, HONDA APE100 DX, HONDA APE100 SPECIAL Knife, HONDA APE50, HONDA APE50 DX, HONDA APE50 SPECIAL Knife, HONDA CD50, HONDA CD90, HONDA CD90
Old car 6BoltCUB
6Bolt old car CUB I have been wanting to use it for some time and purchased it. It is easy to grip Stress eliminating Touring will be fun. View detail
Fits: HONDA LEAD 90, HONDA DIO SR, HONDA DJ1, HONDA DJ1 R, HONDA DJ1 RR, HONDA DJ1 L, HONDA Lead 50, HONDA Dio., HONDA Superdio, HONDA Superdio SR, HONDA Superdio ZX, HONDA Superdio XR, HONDA livudio, HONDA LIVEDIO ST, HONDA Liveo SR, HONDA Livdio ZX, HONDA Johno., HONDA baton, HONDA Scooter 100cc series, HONDA Scooter 50cc series
NK Planning Auto choke
The OEM Parts Auto choke was already discontinued, so we were glad to have compatible parts. Installation was easy and I am very satisfied with the product. View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Good, better than OEM
[How is it used? For ZOOMER
Was the one you received as per Image? high
Was the installation difficult? LargeIt is durable.
How was your experience with it? It is not comparable to OEMs.
[Included Parts:were they on? Yes
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Totally better than OEM
[How is it used? Mounted on ZOOMER
Was the one you received as per Image? Yes
Was the installation difficult? I have been working on the "Mendori etc.," and I have been working on it for a long time.
How was your experience with it? Good feeling
[Included Parts:were they on?
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
I'm sure it's my Motorcycle, but it flickers a lot when I put it on as it is.
It flickered quite a bit. My Motorcycle does not have a Battery, so that may be the reason. Naturally, I don't recommend using LEDs in a battery reply. View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
XRMOTARD requires processing.
[How is it used?
Commuter Vehicle.
Was the one you received as per Image?
Heat Radiation Fin is long and the depth of the fin is too long, which is a disappointment because it hits the light lens hard when it is supposed to be guaranteed to fit the webig!
Was the installation difficult?
The tip of the LED Light Heat Radiation Fin was a little too close to the Lens as it was, so a spacer was made and the tip of the Heat Radiation Fin was modified to fit.
How was your experience with it?
The high beam is a simultaneous light, so it illuminates the front of the lamp as well as the front of the lamp. The Meter panel and Neutral lamp are also brighter due to lower power consumption.
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
Not so much Manufacturer, but rather Webeig's conformity check is not good enough!
Other items that would be helpful
XRMOTARD is guaranteed to fit, but in the end, the User will need to use Spaceretc.
If the shape of the tip of the Heat Radiation Fin were made shorter and more radial, etc., the Heat Radiation Fin would not be visible from the front and the number of compatible cars would increase. I don't know how long it will last, but overall, I think it's almost there.
View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://global.webike-cdn.net/photo/impression/38/38512a45db2e402bf3800e10f5e6035dL.jpg)
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Used for NSR50
Headlight went out and was replaced.
I don't know how bright it is because I basically don't ride at night.
Replacement was easy.
View detail
Fits: YAMAHA JOG, HONDA monkey, HONDA Monkey Baja, HONDA Dio, HONDA CB500F, YAMAHA MINT, YAMAHA TZR50, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA JOG80, YAMAHA JOG-Z, YAMAHA JOG50 Sports, YAMAHA CHAMP80, YAMAHA CHAMP-RS50, YAMAHA CHAMP-CX, YAMAHA CHAMP, KAWASAKI KSR-II, YAMAHA ALLCHAMP, YAMAHA BWS, KAWASAKI KS-2
KIJIMA KIJIMA Air cleaner
Used for NSR50.
Installation is not difficult and easy.
The air cleaner is considerably smaller than the OEM air cleaner, making it easier to maintain.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
I'm doing my job reasonably well.
Products used in TLRs modified from 6V to 12VSpec.
I don't see any changes compared to the OEMs, or rather, I don't know, since they don't run nearly as much at night.
There is no hindrance in its use. The fact that it does not have any problems means it is a good product.
View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://img.webike-cdn.net/catalogue/10509/headlight_TS.jpg)
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Conversion to 12 V
I used it when I converted my CB50S to 12V.
It's bright enough to be used as a normal headlight with no problems.
The Regulator failed and the voltage was so high that it went out immediately, but under normal circumstances it would have worked fine.
View detail
![Incandescent Light Bulb [Head Bulb] T19 P15D25-1](https://global.webike-cdn.net/photo/impression/9d/9d17027fc9e7f56672157aa171814500L.jpg)
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Reliable motorcycle-specific products for OEM compatibility
It was used when the ADDRESS V100 was out of low beamValve
With the Valve out this time, I'm also going to take the opportunity to improve the light intensity, which is no darker (or less) than a flashlight and no less shabby I thought about it, but it seems unlikely that I'll be riding this motorcycle on a country road with no streetlights in the future Purchase OEM-compatible products
I've used Pine Stripe's Valve a few times in the past, but it only claims to be a motorcycle-specific product It's a good choice because it's strong enough to withstand vibration and doesn't have the light level restriction coating that is common in OEM Valve Repeat
The headlights of the ADDRESS V100 include all but the most visible to oncoming traffic and pedestrians I don't have any expectations, so I'm happy with the normal lighting
Valve itself is well made and can be purchased for a little over $400 for Wallet There is no damage Thank you Repair Parts
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
Purchase Repeat
I replaced the Front with this product
FeeRing and stopping performance matches my preference, so I decided to replace the wheel bearings on the rear I bought Repeat to go along with it
The downside is that the price is a little higher, but if you can improve your safety by a few hundred dollars, Cost We think performance is good
View detail
Fits: HONDA Live Dio, HONDA Live Dio ZX, HONDA G', HONDA Dio SR, HONDA TLR200, HONDA HUMMING, HONDA LEAD50SS, HONDA LEAD50R, HONDA Helmet in TACT, HONDA FLUSH, HONDA BEET, HONDA Byte, HONDA HUMMINGG, HONDA TACT FLUMARK, HONDA TACT, HONDA TACT IVY, HONDA TACT, HONDA TACT, HONDA SUPER Dio ZX, HONDA SUPER Dio
for a long time
I've been using these shoes for a long time for drum brakes
There are cheaper products out there, but I love them because I like the braking power and the Touch
If you consider that you are buying safety with a small Gold amount difference, Cost performance is I think it's expensive
View detail
Fits: SUZUKI STREET MAGIC, YAMAHA JOG, YAMAHA CUTE, YAMAHA Excel50, YAMAHA AXIS 50, YAMAHA YB90, YAMAHA YB50, YAMAHA YB-1, SUZUKI VERDE, SUZUKI VERDE, SUZUKI BIRDIE50, YAMAHA JOG POCHE, YAMAHA JOG SPORTS50, YAMAHA POPGAL, YAMAHA BELUGAD, YAMAHA BOXN, YAMAHA BELUGAD, YAMAHA BELUGA, YAMAHA CHAMP, YAMAHA PASSOLII
It's quite good
Used by LEAD100 。 In addition, BP6HSA (Standard Plug BP5HA without resistance), DeMatteo IWF20 (DeMatteo IWF20) (Windshield IRIDIUM), all three PlugGEAR tips are I adjusted it with 0.9mm of LEAD100 specification and compared it with the ride 。 Oh, all three bottles will start from new ...
The starting is the same for all three, the top speed is the same, just the luck when you turn on the Axel Smoothness of rotation was felt only in BPR6HIX 。 I couldn't experience anything else
BragGEARp, but only in LEAD's Second Type Model or Coil Valid 。 The First Model Type Smaller Type will probably catch fire, Mr. Uhtani It would be interesting to use 1.2mm in the Coil of 1.5mm
However, when I spread the GEARP, the life of the Plug is ...
The cover was city-centric and not even with a lot of Idling! 。 carburetorQuantity:I think the Set can handle it 。
View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
That's good
It's a Repeat purchase as a spare part
I bought the same Valve I bought this time from the Shop before and have used it for about 5000km! Of course, I'm still using it as is
The brightness remains the same and the life expectancy is above OEM
However, it is a consumable product and I don't know when it will run out, so I will stock it
In addition, I also bought a tail lamp from M&H Pine Stripe's Valve I did
It's a cheap item, so it's a good buy as an afterthought to get free shipping
View detail