Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .

Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail

Good product

Fits kawasaki w800 Improved the sponginess feeling Arrived well without any problem with customs Good service Highly recommended View detail

safety

The product is a Replace product from a well-known manufacturer, and of course, there were no defects.

It is often cheaper than OEM or in stock, so it would be good in that case.

Personally, OEM Product is the best, but Foot Motorcycle uses this one. View detail

Please come once every two times Large body Oil change!

I replaced it at the same time (this is the 3rd time) when replacing the Oil in DL1000 V-STROM250SX.
It seems that about 1 Filter per 2 Oil changes is good. Probably ^^;.
Finally, DL1000 V-STROM250SX is now officially applicable for DL1000 V-STROM250SX, although until recently it was only ridden for JigSar.

At this price, it would be ideal if the Packing system was also included.

The sense of use was naturally worked at the same time as Oil replacement, so you can't tell if it works or not.
We are not going to be able to save this kind of money and have it go bad as a result, so we will be able to make the best use of it.
Replace them regularly. I'm sure it works...I don't know. View detail

It's perfectly normal

I used it on my MAJESTY125
The MotorcycleBROS specification table lists a different Plug, but this is the correct one, so please be careful if you are buying!
It is a Normal plug, so it is quite normal, but since it is NGK, it is still very safe.
I'm going to Repeat it again. View detail

Reliable KITACOGasket

No problems at all! You'll have it in no time! Reliable KITACO products!
The only strong point is Quantity.:I want you to make 1 Set of 4pcs. too. (Lol) View detail

Cover is consumable! I replace it after 2 years.

I always use two layers of cover. The first one is just size, and I put Oversize over it. We recommend LETSCover, which is heat-resistant and flameproof spec! View detail

Don't leak.

Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment. View detail

Plug replacement

Replaced the original old C7EPlug with no problems.
I'm not sure if it improves starting or fuel economy. View detail

Replacement from OEM

Used in Circuit.
It is a Pad that is easy to control.

It is good that it does not decrease too fast.

Dust also depends on the Course, where Brake is used.
There are many, and some are few.

Strong and stable in temperature changes.

I don't run in the rain, so I don't know. View detail

DAYTONA products are reliable.

I bought this when I replaced the Oil Filler Cap. After installation, there is no oil leakage at all. View detail

Purchased wrong size

I bought the wrong size. I'm thinking of buying it again. View detail

good-looking

Gold and cool looking Used for Rear View detail

Used in Circuit

Used in Circuit run at NINJASL.
It is useful because of its good balance of price, efficacy, and durability. View detail

Exhaust System Replacement

Product Name
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)

Item Number
963-2000005

Vehicles
GSX-R125 ( 2BJ-DL33B ) 2020

Number of man-hours
5 minutes

Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.

Why did you choose this product?
To replace Exhaust System

Was the one you received as per Image?
It was just like the image.

Was the installation difficult?
not particularly difficult

How was your experience with it?
There does not appear to be an exhaust leak.

[Included Parts:were they on?
nothing special

[Was there anything that disappointed you?
nothing special

Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer View detail

Used for Rear

Touch Yoshinshi, better than Junsei. View detail

Braking power up by 1SizeDown from OEMMASTER

The wife of the owner of the vehicle said that she was afraid of braking due to the 20-year-old OEM Master Cylinder, so we decided to replace the OEM MASTER Overhaul with this MASTER. I also wanted to increase the braking power by reducing the size from the Piston type, so I replaced it with the 11mm Piston type MASTER. (Quantity:Pair (for Left and Right) to 1/2-inches→11mm)
The smaller piston size of the Master Cylinder increases the braking force, but the amount of stroke increases, so a change of about 1 size is recommended.

The MAJESTYC I installed is my wife's Motorcycle, and she has a weak grip, so I had a request to make the Brake a little lighter.

The touch was good, and together with the 20 year old Brake hose, which was also changed to Stainless mesh, the Brake looks very nice.
My wife was relieved to hear that it was easier for her to ride as well. View detail

Good quality but high price compared to other companies' products

[How is it used?
Purchased to install Smartphone Holder.

Was the one you received as per Image?
It was just like Image.
Thanks to the comments on the app about compatible models and your impressions, I was able to install the Image as it was before I bought it.
How was your experience with it?
It looks like it can be attached to more than just the Smartphone Holder, so we plan to add an ETCCard and a Drink Holder.
[Points to note]
Check the conformity of the WeBig application, and check the dimensions if the Handlebar is narrowed down.
Needless to say, if the length is set to the Limit, it will interfere with the Master Cylinder, etc., so be sure to confirm the length in advance. View detail

Good looks

I bought a new GSX250R and replaced the tank with a new one, not because there was anything wrong with it, but because I wanted it to look good. I thought it would be cool if the tank was made Radial style. As others have said, when I tried to install the tank, the tank was a little askew and the position of the tank bracket was not quite right. I was disappointed in this point. The installation was easy. View detail

long vowel mark (usually only used in katakana) (>ω<;)

Converted to my son's BALIUSA5, which had an air leak from the MASTER.
I thought about installing the Radial master, but I decided to go with the ZrX1200 DAEG because it is expected to be replaced by the ZrX1200 DAEG next year, so I decided to go with this one for cosmetic reasons.

Tank Separated Type is good for a different atmosphere. (? ・ ・?)
For the price, Touch was fine and a good buy!

However, it may be a little long for Mr. Balius in the standard lever….
It was sticking out of the handlebar, so I replaced it with a short lever. (Polish)
I should have measured the length before purchasing and selected the short lever type lol. View detail