Reviews
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Fits: YAMAHA SR250, SUZUKI 250SB, HONDA 250T LACustom, HONDA AX-1, HONDA CL135, HONDA CL350, HONDA CL72, HONDA CL77, HONDA CM250T, HONDA CM400T, HONDA CRM250AR, HONDA CRM250R, HONDA FTR223D, HONDA FTR250, HONDA GB250 CLUBMAN, HONDA GB400TT, HONDA GB500TT, HONDA MT250ELSINORE, HONDA MTX125R, HONDA MTX200R
Does not fit the KL250 Sherpa.
The Manufacturer's list of compatible models says it is compatible with KL250 Sherpa, but that's too long.
If installed normally, there will be excess
The quality of the product itself is not bad, so I think it will be fine for cars with longer forks.
KL250 Sherpa's Fork outerTop to bottom of trident is 240mm
Catalogue value WheelTravel is 230mm
100mm remains above the Outer even when shrunk the most without processing.
This would make Stroke about 130mm.
If it was just for Inner Tube protection purposes, it would be fine, but I don't think it is, so I cut it off, even though it will look very ugly lol.
In hindsight, I lightly regret that using the top half wouldn't have made it so ugly.
However, even in this state, the Stroke will be reduced by about 50mm
Boots itself becomes Bump rubber.
Even other companies' products that say they are compatible with KL250 Sherpa are quite long.
Would it be better to just use a shorter product with more extension?
Maybe I'm losing my mind, but I'd like to find a good product!
I bought it + even processed it so I'll be using it for a while lol.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Fits: SUZUKI GSX450, KAWASAKI Z400LTD, KAWASAKI KH250, KAWASAKI Z250LTD, KAWASAKI Z250FT, SUZUKI GSX400E, SUZUKI GSX250E, SUZUKI GT750, SUZUKI GT550, SUZUKI GT380, SUZUKI GT250, SUZUKI GS400, SUZUKI GT125, YAMAHA XS750, YAMAHA XS650, YAMAHA XS400, YAMAHA XS250, YAMAHA GX400, YAMAHA GX250, HONDA CB350
Enhanced Ignition
Used for CB250. The installation pitch is the same, and it was possible to install without difficulty by bending the terminals.
The polarity is indicated at the base of the terminal, although the color of the Wiring is different.
Coupler, or simply throw away the entire Wiring and change it to a terminal.
As long as the points are properly adjusted, ignition timing adjusted, and condenser inspected,
Sparks are stronger and better.
I am looking forward to the durability of the rest.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
The product was as good as OEM Product
I will be the first to search your Net for parts that are no longer available from the OEM Product. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: KAWASAKI EL250 ELIMINATOR LX 250cc All, HONDA CB350F 350cc All, HONDA CB1100R 1100cc All, HONDA CB1100R 1100cc All, HONDA CB1100R 1100cc All, HONDA CB1100F 1100cc All, HONDA CB1000C 1000cc All, HONDA CB350F 350cc All, HONDA CB550F SUPER SPORT 550cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL252 250cc All
The diameter of the attached O-ring is different.
XJR1300, but the diameter of the attached O-ring (FilterCase side) is different.
We had to reuse the old one. I am attaching a picture.
Please take care of quality control.
View detail
Fits: KAWASAKI EL250 ELIMINATOR LX 250cc All, HONDA CB350F 350cc All, HONDA CB1100R 1100cc All, HONDA CB1100R 1100cc All, HONDA CB1100R 1100cc All, HONDA CB1100F 1100cc All, HONDA CB1000C 1000cc All, HONDA CB350F 350cc All, HONDA CB550F SUPER SPORT 550cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR 250cc All, KAWASAKI EL250 ELIMINATOR LX 250cc All, KAWASAKI EL252 250cc All
Manufacturer's Products for Peace of Mind
The Oil environment is somewhat better with this product than with the OEM Product.
When changing Oil, I alternated between the two, and I feel that this Filter is smoother on Engine than OEM as Fee Ring.
View detail
Fits: HONDA , HONDA CB750FOUR, HONDA CB750K, KAWASAKI , KAWASAKI 250TR, KAWASAKI KZ650, KAWASAKI W1, KAWASAKI Z-1, KAWASAKI Z-2, SUZUKI GT750, YAMAHA BRONCO
Purchased for CB750four
Purchased both Front and Rear.
I started with the rear tire first and followed the instructions to install it without any problems.
A year later, I installed it in conjunction with the replacement of the front tire, but the joint between the rim and the double-sided tape was not properly connected.
It did not work and I gave up on this one. Maybe a year has passed and the adhesive strength of Tape has weakened.
You may
I couldn't see any difference in the ride quality after installing the Tubeless.
The cost is not so good, because it is more expensive for the
The satisfaction is the DIY sense of accomplishment and the relief when the Tire is inflated and there are no leaks.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Looks cool too:??
Used for VANVAN75.
Starting performance seems to have improved.
There was no change in maximum speed.
It looks pretty much like it.
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Repeat use. I don't remember how many times I have already replaced it.
I don't like the sticky feel of custom grips on the market.
I have been using it for years.
I was surprised that it had enough gripping power without being sticky.
In fact, it is not sticky to the touch with bare hands, and there is no sense of uneasiness due to its softness.
For wire lock (?) The grooves are cut to allow for use in Race.
[How is it used?
Touring ~ Circuit
Was the one you received as per Image?
YES
Was the installation difficult?
Easy (Installed on external high throttle)
How was your experience with it?
Satisfied
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
The price is low but the quality is high and there is nothing to say about it.
However, currently there is only a 120mm lineup, so I am eagerly awaiting a 115mm version.
View detail