Reviews
Exactly to MOTARD as well.
Bought this for my drz400. For a long time, I had been wearing the one for my previous Large Motorcycle, but it was not so good because it was too loose. This time I bought it because it said "for Off-Road" and I am satisfied with the just fit. I also like that the lower part can be closed with a string. View detail
Fits: YAMAHA YZF 450, YAMAHA YZF 400, YAMAHA YZF 426, YAMAHA YZ 250, YAMAHA WR F 250, SUZUKI RMZ 250, SUZUKI RMZ 450, KTM XCW 525, KTM XC 525, KTM XCG 525, KTM SXS F 450, KTM SXS 540, KTM SXS 250, KTM SXS 450, KTM SXC 625, KTM SX SXS 125, KTM SX 300, KTM SX F 250, KTM SX 250, KTM SX 144
I don't know.
We used Brembo for the front calipers this time.
The caliper recommendation was 15RCS, so I put it on my Grom, and the brake touch is totally different compared to the stock one.
I've been riding my CB250R and getting more and more hits, and the front brake is working better and better.
I don't feel like it's direct. Well, I've never ridden a bike with ABS before.
I knew what to expect.
It felt like the 15RCS recommended master cylinder when I gripped it.
I was tempted to put on 16RCS and compare. Sweat.
It's expensive, so I can't just change it at a moment's notice.
View detail
Genuine DID 520ERVT Replacement Chain Link
I always like to have some of these in stock in case of any issue during fitting different chains. The DID 520ERVT is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get the white grease packet in this size chain so that's always a good thing, I have a lot of these anyway but you cannot have too many. The chain link is very well made one, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. I keep the rivet link type and this clip joint type but had ran out of this version, hence the purchase. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: HONDA CRF250R, HONDA CRF450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX450R, KAWASAKI KX125, KAWASAKI KX250, HONDA CR250, HONDA CR125
Anodized is beautiful.
MX-123 was installed on a CRF250.
OEMSeat is modified with 3cm up high seat and 14mm up spacer to get the best position.
View detail
Fits: KTM 65SX, KTM 250SX, KTM 125SX, GASGAS EC250, GASGAS EC200, GASGAS EC125, KTM 250EXC, KTM 200EXC, KTM 125EXC, KAWASAKI KX65, KAWASAKI KX85, KAWASAKI KX125, KAWASAKI KX250, HONDA XR650, HONDA CRF450X, HONDA CRF450R, HONDA CR85R/RII, HONDA CR250, HONDA CR125, YAMAHA YZ85
Protect your spark plugs while out riding trails
It would suck if you got stuck in the boonies because of a fouled plug and you're not carrying any spares. This case works perfectly. The most important thing is to protect the spark plugs from impacts that could change the gap or damage the tip.Not sure about larger plugs, but this was absolutely spot on for my bike plugs.It's made of a quality plastic.Really good price. Small and very secure, for longer trips. Especially when going into the local dark continents, where no one else goes. Good travels, safe journeys, and... go prepared. No one else cares, or goes. View detail
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Z -WHEEL Aluminum nipples kx250 Front
Cost performance is better than OEM.
Nipple head (Rim side) is huge, so
Large amount of pop out from Rim
When installing the Tire, the BEET was not falling enough.
Tire is a little hard to fit
View detail
Genuine DID Spare Chain Link
I was in need of a few spares for various chains I have in stock and this 520 DZ2 was one of those I stock but have no other spare links. I find it is always good to have spares in stock as even though the original chains do come with a link like this, occasionally they do get damaged and then you are stuck. Finding the right chain link was easy as I just checked down Webike's inventory for the one I wanted. The price Webike have these for is brilliant and better than I could source locally. I did order quite a few different types of chain links as I do stock a lot of various chains anyway. As these were all being shipped together, this also saved on a little postage cost. EMS got my order delivered in 5 days from being shipped. This chain link spare came in a nice DID packaging and was well presented. It came with multiple o-rings and a squish pack of white grease. You can never have enough of that anyway. The chain link is very well made as with all DID chains etc. A nice little stock up is what was needed and I am reassured that I now have spares in case I need them. Thanks Webike. View detail
Changed from Clip to Crimp
When replacing the chain on the KLX230R, the ERVT came with a clip-type joint, but the clip didn't fit well and I had to press-fit it too much and it failed, so I decided to use a Crimp joint, which I am used to.
I think the Crimp is fine for me, and the Crimp is easier to work with because I'm used to it.
View detail
Purchased due to Headlight Bulb running out
I purchased these because the bulbs were out. The Pine Stripe bulbs were as bright as I expected.
It's also inexpensive, so it's helpful.
View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Convenient and lightweight! But low strength
Large change is useful for washing the underside of the Motocrosser!
However, it is so strong that it will bend if you try to start KICK with STAND applied.
If it only supports the weight of the car, there is no problem.
The handlebar can be used as an insert, making it easy to insert into an Axle Shaft.
View detail
just right
The OEMSTAND has large, stable feet, but it cannot be hooked onto a vehicle body, making it difficult to carry.
So I bought this DRC STAND.
As shown in the photo, there are front and rear joints, and one of the joints can be changed longitudinally, so a total of three joints can be used.
Husk TC125 was Just size.
View detail
Fits: HONDA CRF250R, HONDA CRF250RX, HONDA CRF450R, HONDA CRF450RX, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250X, HONDA CR125R, HONDA CR250R, HONDA CRF1000L, HONDA CRF250X, HONDA CRF450L, HONDA CRF450X, KAWASAKI KX125, KAWASAKI KX250, YAMAHA WR250F, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR450F, YAMAHA YZ125X
Brake hose clamp and Quantity:Blue in Set
WR looks good with Blue parts anyway, Parenthesis is good.:We recommend the Blue color as a set. It is made of high-strength aluminum, so it is hard and does not deform even with large torques, and it does not chip easily. View detail
Genuine Kawasaki Hose Clamp for KX250
This was a replacement for the existing hose clamp that had been beaten up over the years. Although you probably can get away with not being perfect but if you are like me, if a job needs doing, it needs doing well. Not specifically an expensive part so why not just change it. FInding the right part was not hard as I do use the help pages and links Webike provide on their help pages. I also cross referenced with Kawasaki schematics to make doubly sure. The part was good value for what it does. I do always have more than one part in my basket for ordering as this help spread the cost of shipping. I used EMS as I have done for a number of months now, and every time, my order arrives promptly and on time. 5 days from being shipped from Webike warehouse and my order arrived. The parts were all really well packaged and no damage to anything at all. The hose clamp also consists of the plastic ring and metal bracket which both looked great. Really well made and thought out. Fitting is really quick as it just bolts on. As there is already a split in the ring, you can feed the hose down in it with no issues. Very pleased with this purchase and the bike looks great. View detail
If durability is more important than weight, this is the one for you!
I chose this model for its durability since I mainly use it for day touring and walking in the woods. The material is steel, so it is heavier than it looks. I don't think it's necessary to use Aluminum or something like that unless you're going to Race. View detail
Oil seal
Project bike, one of most difficult to work on as need to disassemble exhaust to access. Easy to replace once old one removed. Love OEM parts at good price View detail
Fits: KAWASAKI KDX125SR, KAWASAKI KDX200SR, KAWASAKI KDX220R, KAWASAKI KDX220SR, KAWASAKI KDX250SR, KAWASAKI KLX250ES, KAWASAKI KLX250SR, KAWASAKI KX125, KAWASAKI KX250, SUZUKI DR250R, SUZUKI DR250S, SUZUKI DR250SHE, SUZUKI RM125, SUZUKI RM250, SUZUKI RMX250 S, SUZUKI RMX250, SUZUKI TS125R, SUZUKI TS200R, SUZUKI DJEBEL250, SUZUKI DJEBEL250GPS Ver.
Not yet experienced
I think Road works better than OEM, that's all I can tell you right now, but I haven't experienced what happens when it's off. As for the Pad, it didn't squeal without the chamfer. View detail
Fits: KAWASAKI KX125
Genuine Kawasaki Clutch Cover Out Gasket for KX125 2001
I need a lot of parts to get this old and slightly damaged bike back to ripping up the dirt, these small parts are definitely needed for that purpose. This was a rebuild that was not going to be a quick fix. Finding the part was easy using the help pages from Webike. I did not really pay much for shipping as most of the parts were small and pretty light. Even though I got the fast service from Fedex, the price was still very good. All arrived with me in less than a week. The gasket was in perfect condition and Webike kept this nice and flat so not to distort the shape.The flexibility is enough so not to be an issue if it gets caught whilst installing. All the mount holes aligned correctly and fitted in less than half an hour. Now this is one of the many jobs that is completed, onto the next one for this old girl.The service I got from Webike was brilliant. I will be back for all my OEM parts now. Thanks a lot Webike View detail