Reviews
Fits: HONDA CB125 T, KAWASAKI ZRX400, KAWASAKI EX-4, KAWASAKI ZZR250, KAWASAKI 250TR, SUZUKI VOLTY, KAWASAKI ESTRELLA, SUZUKI RV200 VANVAN, YAMAHA R1-Z, SUZUKI GRASS TRACKER, SUZUKI GOOSE350, SUZUKI GSX KATANA , SUZUKI ST250, SUZUKI IMPULSE250 , SUZUKI WOLF125, SUZUKI GSX-R250, SUZUKI GSX400, YAMAHA RENAISSA, YAMAHA MAJESTY125, YAMAHA XJR400
Just the Right Light Cover
I purchased this for my VOLTY. The holes for the front wheel locks are easy to use and also a good marker when Covering. I have been using it under my carport for about 2 years and it hasn't torn yet. The fabric is thin, so on windy days it peeled off, so I put a Futon Cover on the inside to prevent rubbing and scratching. However, I am glad I bought it because the cover protects my motorcycle from rust and dust even after bad weather. View detail
Fits: KAWASAKI Estrella RS LIMITED EDITION, KAWASAKI ZZR250, KAWASAKI Estrella RS LIMITED EDITION, KAWASAKI Estrella., KAWASAKI Estrella., KAWASAKI ZXR250, KAWASAKI ZXR250 R, KAWASAKI KSR-II, KAWASAKI KR250, KAWASAKI KSR-I, KAWASAKI KL600R, KAWASAKI KLE500, KAWASAKI KMX200, KAWASAKI KLE400, KAWASAKI KMX125, KAWASAKI KLE250 Anaero, KAWASAKI KL250R, KAWASAKI GPZ400R, KAWASAKI KDX200SR, KAWASAKI GPZ250
It was the same old efficacy and relief.
I installed it on my recently purchased RG50γ. The NORMAL was not very effective, but after replacing it and running for a while, the effectiveness is clearly different. View detail
Fits: YAMAHA SR500, YAMAHA SR400, TRIUMPH BONNEVILLE SE, TRIUMPH BONNEVILLE T100, TRIUMPH BONNEVILLE, SUZUKI GSX250FX, SUZUKI GSX1400, SUZUKI GSF750, KAWASAKI W650, KAWASAKI W400, KAWASAKI ZEPHYR KAI, KAWASAKI ESTRELLA Custom, KAWASAKI ESTRELLA RS, KAWASAKI ZRX1100II, HONDA X4LD, HONDA X4, HONDA CB400Four, SUZUKI GOOSE350, HONDA CB400SF, HONDA CB400SF Ver S
It is well made
I put it on for now for touring, which is mainly high speed.
The work itself is easy, but it is better to prepare protection film separately to prevent scratches on the light bracket on the Motorcycle side. (Black color may show scratches).
As for the effect, we just put it on and did not actually run it.
I bought a Blast Barrier more than 10 years ago, and when I tried it on, it stuck perfectly.
I will try to change it sometimes with Ime Chain, but I would like to eventually add Cowl.
View detail
Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1100W, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI DR250R, SUZUKI DR-Z250, MALAGUTI MADISON400, PIAGGIO LIBERTY-50, KAWASAKI BALIUSII, KAWASAKI BALIUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZ-R400, KAWASAKI ZZ-R600, KAWASAKI ZZ-R1200
The effect of MotoDX, which is dedicated to two-wheeled vehicles, is
I bought MotoDX plugs for my ZX14R because I thought the plugs were getting to the end of their useful life and I was attracted by the claim that they were for motorcycles only. Compared to the Iridium plugs I had been using, the MotoDX seems to blow up faster.
Satisfied with good starting performance.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CB500F, HONDA CB500X, HONDA CBR1000RR, HONDA CBR125R, HONDA CBR250R (2011-), HONDA CBR400R (2013-), HONDA CBR400RR, HONDA CBR500R, HONDA CBR600, HONDA CBR600F, HONDA CBR600RR, HONDA CT125 HUNTER CUB, HONDA NC700S, HONDA NC700X, HONDA RVF400, HONDA RVF750, HONDA VFR400R, HONDA VFR750F
With magnet, it stands out and makes it easier to maintain.
I replaced the oil with gold dust because it is an old car body, but there is no oil filter in this car model, so I hoped that I could at least catch the gold dust with the magnet on the drain bolt.
The color is Blue to match the car body color. It is a very Beauty and prominent color, which is good because it makes it easier to find this Bolt at the bottom of the car body, where it is hard to see. It is good because there are other Bolts right next to it.
This body will not be ridden much distance, so next Oil replacement (1000km) will probably be replaced in a year before I drive any distance, but I'm looking forward to seeing how much Gold genus powder is removed at that time. (I forgot to take a picture, but there was quite a bit of Gold Genus powder that had settled on the pure Black Oil after the replacement.)
For your information, the specification of OEMBolt is M12×15mm P1.5 BoltHead hexagonal 17mm, and this product differs only in BoltHead dimension, which is hexagonal 14mm.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
It's very good quality
Works perfectly with the 2023 GSX S1000! The grip feels great! The quality is also genuine!
Fast delivery is also very good!
A bike shop you should use often!
I just wish the shipping cost was a bit cheaper.
I want to buy more stuff. -------------------------------------------- -------------- The 2023 GSX S1000 is perfectly compatible and works! The quality is also pure! Fast delivery is also very good! Bike shopping mall to use frequently! It would be nice if the shipping fee would be a little cheaper. I want to buy more things Powered by Google Translator
View detail
Fits: HONDA NSF100, SUZUKI VOLTY, YAMAHA RZ125, YAMAHA XT660X, YAMAHA CYGNUS X SR, SUZUKI COBRA, YAMAHA TZR50, YAMAHA TT250R RAID, KAWASAKI GPZ400S, KAWASAKI KH250, SUZUKI RG200, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI SV400, SUZUKI TS125R, SUZUKI TS200R, SUZUKI VX800, SUZUKI Across, SUZUKI GS400E, SUZUKI GSX250S KATANA
NisshinRetro Brake Master CylinderKit
[How is it used?
Used for KawasakiDouble400
Was the one you received as per Image?
Yes
Was the installation difficult?
It is not difficult, but it does take a little getting used to bleed air out of Brake fluid.
How was your experience with it?
Round Type Cylinder matches NEO CLASSIC Double and is satisfied with Large change.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No
Other items that would be helpful
nothing special
View detail
Fits: HONDA FTR223, SUZUKI ST250 E type, SUZUKI ST250, SUZUKI GSR400, KAWASAKI ZRX400, HONDA monkey, HONDA Ape 50, HONDA Ape 100, HONDA NC700X, HONDA NC700S, YAMAHA TW225E, YAMAHA TW200E, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI W800, KAWASAKI W400, KAWASAKI 250TR, HONDA HORNET250
Perfect hole drilling
[How is it used?
Used to drill switch box preparation holes in universal handles
phi& phi;5mm.
Was the one you received as per Image?
Fairly solid construction
How was your experience with it?
The hole was drilled perfectly in the desired position.
[Points to note]
High prices….
It's not something I use that often ….
How did it compare to other products?
Unknown, never used another company's.
Some other companies' products are a little cheaper,
Is there any difference as far as performance…?
View detail
Fits: SUZUKI GSX1300R HAYABUSA, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R250R, SUZUKI GSX-R1100W, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI DR250R, SUZUKI DR-Z250, MALAGUTI MADISON400, PIAGGIO LIBERTY-50, KAWASAKI BALIUSII, KAWASAKI BALIUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100, KAWASAKI ELIMINATOR 250V, KAWASAKI ZZ-R400, KAWASAKI ZZ-R600, KAWASAKI ZZ-R1200
NGK Moto DXPlug CR9EDX-S 91579
Used on a 2015 GSX-S1000. I did not see GSX-S1000 in the compatibility list, but it was compatible with New Model KATANA of the same engine, so I ordered a Large sturdy one.:10mm Screw Length:19mm Hexagon Width across Flats:The size is 16mm, the same size as the Iridium plugs used in the GSX-S as OEM, and I was able to replace them without any problem.
I couldn't feel the difference that I could see in the drills, but I can drive without any problems in starting, idling stability, etc.
I think it is cosmetically better than Iridium plugs because it is said to have a long life.
View detail
Fits: KAWASAKI W650, KAWASAKI ZRX400II, KAWASAKI ZR-7/S, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI BALIUS, KAWASAKI BALIUS2
Will not pass inspection.
After installing this Headlight, I went to testCenter to adjust the optical axis.
Two irradiated points, one with a huddled area and the other with a blurry area.
I was told that I could not inspect the car.
View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
Easy and high cost performance!
CBR250RR (8BK-MC51) It is used for
Size was Exactly as the car model is listed in the compatibility information.
I purchased this product because I store my motorcycle outdoors in a covered bicycle parking area and I wanted to have a little waterproof performance.
In conclusion, the waterproof performance was more than sufficient for parking bicycles in a covered bicycle parking area.
I wonder if it will stain a little if it is rained on strongly, but it will waterproof with no problem if only water is splashed on it.
View detail
Fits: ADIVA AD250/IE, APRILIA RSV1000SP, APRILIA RSV4 FACTORY/R, APRILIA SPORTCITY CUBE 250IE, APRILIA SPORTCITY250, BENELLI TORNADO900/TRE, BENELLI TnT1130, DUCATI 749/S/DARK, DUCATI 996R, DUCATI 998/S, DUCATI 998R, DUCATI 999/S/R, DUCATI 999BIPOST, DUCATI MONSTER S4R/ S4RS Testastretta, DUCATI ST3, GILERA DNA125, GILERA RUNNER VX125 4T, HONDA VFR800 (reimported), ITALJET JET-SET150, KAWASAKI BALIUS/II
I always buy Denso products with confidence.
I have been using Denso products for 5 years because it is a very old car and there are parts that are hard to trust in other brands' products. We Bike itself sells at a reasonable price, so I buy it both when I buy other products, and I am always satisfied. are doing -------------------------------------------------- -------- It is a very old difference and other brand products are difficult to credit, so we have been using Denso products for 5 years. I do it. Powered by Google Translator View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Repeat use. I don't remember how many times I have already replaced it.
I don't like the sticky feel of custom grips on the market.
I have been using it for years.
I was surprised that it had enough gripping power without being sticky.
In fact, it is not sticky to the touch with bare hands, and there is no sense of uneasiness due to its softness.
For wire lock (?) The grooves are cut to allow for use in Race.
[How is it used?
Touring ~ Circuit
Was the one you received as per Image?
YES
Was the installation difficult?
Easy (Installed on external high throttle)
How was your experience with it?
Satisfied
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
[Opinions and requests to Manufacturer
The price is low but the quality is high and there is nothing to say about it.
However, currently there is only a 120mm lineup, so I am eagerly awaiting a 115mm version.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI VERSYS-X 250, KAWASAKI Z1000 (water-cooled), KAWASAKI Z250 (2013-), KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400II, KAWASAKI ZXR250R, KAWASAKI ZXR400, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR250, KAWASAKI ZEPHYRX, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RR, KAWASAKI BALIUS2
Look good!
I also changed Master Cylinder to PremiumZone, so I also have Oil filler. I think it is important to look good. I am self-satisfied. I put the normal cap in the tool box to avoid the possibility of theft. This series is expensive, but I think you will be satisfied with it. View detail
Fits: HONDA XR250, HONDA CR125, SUZUKI Sky Wave 250, YAMAHA Majesty 250 (SG03J), YAMAHA Majesty 125, YAMAHA tricker, YAMAHA SRV250, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA CB400 SUPER FOUR, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS (Bewith), HONDA monkey
disappointed
I searched for parts from the car model on our site and purchased them, but could not install them. Crying I thought I could install it without any modification since I searched for parts by car model, but I am disappointed... View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
I'm replacing it anyway.
[How is it used?
I replaced the oil filter at the same time when I replaced the oil in the ZX-7R. I use a cheap oil filter because I don't care what kind of oil filter I use.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the filter with an oil filter wrench and tighten the new filter with a hand wearing a rubber glove.
How was your experience with it?
I don't feel anything in particular, I would be happy if you Catch Garbageetc.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've touched a few vehicles with stupidly tightened Oil Filters, and I always thought, Torque check it out.
In the worst case, if it does not come off, stick a penetrating driver in and turn it to remove it.
View detail
Fits: HONDA Forza(MF10), HONDA Forza(MF10), HONDA glom, KAWASAKI ZX-9R, KAWASAKI ZX-RBF, KAWASAKI ZX-RAFA, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-14R, KAWASAKI Z125 Pro, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI W650, HONDA NC700X, HONDA NC700S, YAMAHA MT-25, YAMAHA MT-03 (2015-), HONDA CRF1000L Africa Twin, HONDA CBR400R (2013-), HONDA CBR250RR(2017-)
Steel for peace of mind
If you consider the risk of breakage, I would definitely use steel.
The wiring holes are convenient for circuit running, and although it is made of steel, it hardly rusts due to its good plating.
I used it on a ZX25R after break-in was completed and got a pretty big piece of Gold.
Well, if you can't remove it here, there is an oil filter, but you can visually check the condition and feel a sense of exhilaration like when you remove a big piece of earwax.
View detail
Fits: KAWASAKI Z400GP, KAWASAKI ZEPHYR400χ, KAWASAKI ZXR250R, KAWASAKI ZXR400, SUZUKI GSX250FX, KAWASAKI ZZR250, KAWASAKI ZXR400R, KAWASAKI ZX-4, KAWASAKI ZXR250, KAWASAKI FX400R, KAWASAKI ZEPHYR400, KAWASAKI XANTHAS, KAWASAKI GPZ400S, KAWASAKI KLE250 ANHELO, KAWASAKI KLE400, KAWASAKI GPZ400R, KAWASAKI GPZ400F, KAWASAKI GPZ250R, KAWASAKI GPX400R, KAWASAKI GPX250R II
Purchased for ZZr 250
I was worried about ZZr250 because the installation method is different between the initial model and the mid-term or later model.
I was relieved when I opened the package as it seemed to be compatible with both.
View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI ZZR250, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ZEPHYR750 RS, KAWASAKI NINJA650R
Dress-up!
I was looking for something lightweight for Clutch and found this product.
Brake lever and Quantity:I bought this set because I thought the price was good. I think it looks better Parenthesis and the Clutch is a little lighter.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CB500F, HONDA CB500X, HONDA CBR1000RR, HONDA CBR125R, HONDA CBR250R (2011-), HONDA CBR400R (2013-), HONDA CBR400RR, HONDA CBR500R, HONDA CBR600, HONDA CBR600F, HONDA CBR600RR, HONDA CT125 HUNTER CUB, HONDA NC700S, HONDA NC700X, HONDA RVF400, HONDA RVF750, HONDA VFR400R, HONDA VFR750F
ZETA Zeta Magnetic drain bolt
We purchased this product again due to a problem with the product we were using.
However, oil started leaking around November of last year, and we kept an eye on it, but the dripping part was found to be near the drain. After retightening, the oil was drained and inspected, and a crack was found near the base of the bolt.
As a result, it turned out to be a drip from the crack. Since I don't ride my motorcycle in winter, I used OEMBolt and put back the oil.
Since it has been used for about 10 years and the material is aluminum, I will purchase it again and install it at the time of the next oil change.
View detail