Reviews
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Fits: SUZUKI DRZ400SM, SUZUKI DRZ400S, KAWASAKI VERSYS-X300, KAWASAKI KLX230, YAMAHA XT250, HONDA XR250MOTARD, HONDA XR230MOTARD, SUZUKI LT-Z250, SUZUKI LT-Z400Z, SUZUKI LT-Z400, SUZUKI LT-R450, SUZUKI DR200S, SUZUKI 250SB, SUZUKI DJEBEL250XC, SUZUKI DR250R, SUZUKI RMX250S, KAWASAKI KFX700, KAWASAKI KFX450R, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X250
ZETA Reserve Cover
I replaced it with ZETA's AnodizedRed because it is uniform. The texture etc. is very good! View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
Good texture as well as ?Good strength
I bought it for its appearance, but the strength is okay!
I thought it was good for the price.
View detail
Pin is too long for early BAJA and hits Spoke.
I thought it was a cheap Front and Rear Set and installed it on my early BAJA, trusting the fitment guarantee, but it was too long in both directions compared to the front and rear pins, and it hit the Spoke too hard to use. It was a very expensive purchase. I will never buy again. View detail
Plating to hide peeling and protect the outer tube
Stepping stones on Outer tube of inverted Front fork? Deterioration? I bought it to protect the outer tube of the inverted front fork and to hide the peeling of the plating.
Installation is simply a matter of framing.
I like it because it is carbon and looks good.
The only drawback is the high price.
View detail
Fits: HONDA XR250, HONDA CRM250R, HONDA CRM250AR, KAWASAKI KLX125, YAMAHA WR250X, YAMAHA WR250R, YAMAHA Cerro 250, YAMAHA tricker, SUZUKI DR-Z400SM, SUZUKI DR-Z400S, KAWASAKI KSR110, KAWASAKI D Tracker X, KAWASAKI D tracker, KAWASAKI KLX250, KAWASAKI D Tracker 125, HONDA CRF230F, HONDA XR230, HONDA CRM50, HONDA CRM80, HONDA CRF250M
Did not work well
XR250MOTARD, used for front and rear Blinker LEDs.
It did not work well.
Specifically, I have become a high flasher.
Honda's Front blinker seems to be a bit special as it also serves as a position.
View detail
![PREMIUM ZONE Oil Filler Cap [M20XP2.5]](https://img.webike-cdn.net/catalogue/images/15651/91885_O01_TS.jpg)
self-satisfaction
One point Accent on Red Motorcycle! View detail
Fits: KAWASAKI Z125-PRO BR125H, KAWASAKI KLX125 LX125C All models, KAWASAKI D Tracker 125 LX125D
It was a full set, including packing around the oil.
[How is it used?
Filter replaced in conjunction with Oil replacement
How was your experience with it?
Quantity of Oil Filter, Packing of Filter, DrainWasher and Packing of Filler cap:It is installed in the same way as SetOEM Product.
However, the DrainWasher was replaced with a YOSHIMURA oil temperature sensor, and the filler cap packing was not used this time because it did not need to be replaced after checking.
How did it compare to other products?
If you only need Filter and Filter Packing, there are other products that are cheaper.
[Points to note]
I don't think there is anything special about it. I will check the durability from now on.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: DUCATI 1299PANIGALE S, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI MONSTER1200S, DUCATI MONSTER1200, DUCATI MONSTER1100EVO, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER696, DUCATI MONSTER796, YAMAHA TRICITY125, YAMAHA TRACER900, YAMAHA TMAX530SX, YAMAHA TMAX530DX, YAMAHA MT-09 TRACER, YAMAHA RZ50, YAMAHA TMAX530, YAMAHA R1-Z
oil cap
The genuine oil cap is easy to open and close, but it seems like it could be a good choice in case of an unsuspecting terrorist attack. Furthermore, the aluminum and design are great. It could be a water reservoir. I don't know if it's an outlet or a sealing hole, but it will fly away in the wind. The color is black. I tried to choose it, but it was out of stock, so I went with the green color that was in stock as a last resort in case the delivery would be delayed, but when I saw it in person, I really liked it. It was not a bright green, but a dark and somewhat heavy color. Green color recommended. My car is not in the CL500 category --- -------------------------------------------------- ----- The pure oil cap is easy to open and close, but it can be a good choice for terrorism, but it is also excellent for design and design. I tried to choose to choose, but I didn't have stock, so I was so delivered to the green color with a stock. I liked the real thing. Powered by Google Translator View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
It is cosy and easy to use.
I have been using this for all Oil Filler Caps recently.
I like the design and the cost performance.
View detail
Fits: BENELLI VELVET125250, SUZUKI BANDIT400VZ, SUZUKI V-STROM650, SUZUKI SV650S, SUZUKI TL1000S, MALAGUTI Madison 150, MZ 125SM, MZ RT125, PIAGGIO PIAGGIO X-9 200 AMALFI, PGO J.E.V. 125Duo's, KYMCO KCR125, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HYOSUNG RT125D, HYOSUNG GV250 Acura, HYOSUNG GT250Comet, HUSABERG FE400e, HUSABERG FE501e, HUSABERG FE600e, HUSABERG MotocrossFC400
All Motorcycles I have are these.
Every Motorcycle I own has this on it. View detail
Fits: SUZUKI 250SB, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLX250
Under Guard
Material:I had been wearing Plastic's Under Guard, but now I have more opportunities to drive on forest roads,
I purchased this Under Guard. The area to be guarded has increased from the previous one,
I am satisfied. Installation is easy.
View detail
Fits: BETA 450 RR 4T 05-12, HONDA XR 250 L R 91-93, YAMAHA YZ 450 F 03-07, YAMAHA YZ 426 F 02-02, YAMAHA YZ 426 F 00-01, YAMAHA YZ 250 WR 01-02, YAMAHA YZ 250 F WR F 4T 03-06, YAMAHA YZ 250 F WR F 4T 01-02, YAMAHA YZ 250 F WR F 4T 00-00, YAMAHA YZ 250 F 03-06, YAMAHA YZ 125 WR 04-07, YAMAHA YZ 125 WR 03-03, YAMAHA YZ 125 WR 01-02, YAMAHA WR 450 F 12-15, YAMAHA WR 450 F 03-11, YAMAHA WR 426 F 02-02, YAMAHA WR 426 F 00-01, SUZUKI RM 250 Z 07-12, SUZUKI RM 250 Z 04-06, SUZUKI RM 250 96-98
No more heat or fade,Good value
I bought these for my bike. The install went very easy. I tested these immediately the very next day on a twisty road 220 km ride. These brake pads are amazing! They do not squeak, and the stopping power is awesome. Much better than the OEM pads I still had on my bike.I ordered the rear pads and it made a huge difference in stopping power! Now I have ordered the same for the front because these pads seem awesome. Galfer is a brand that I will trust with all my future pad purchases. I don't have a longevity review since I just installed them yesterday but everything so far is great. As always, Webike delivered fast shipping. View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
High but improved maintainability
[How is it used?
I'm concerned about rust on the pad pins since we are in a salt-affected area.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Durability to be determined, Pad slides well.
[Included Parts:were they on?
None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: DUCATI 1199PANIGALE, DUCATI 1199PANIGALE R, DUCATI 1199PANIGALE S, DUCATI 1299PANIGALE, DUCATI 1299PANIGALE R, DUCATI 1299PANIGALE S, DUCATI 848, DUCATI 848 EVO, DUCATI 899PANIGALE, DUCATI 959PANIGALE, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI HYPERMOTARD821 SP, DUCATI MONSTER1100EVO, DUCATI MONSTER1200, DUCATI MONSTER1200S, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER821
On New Modelmt09
I wanted to use the parts from the old model MT-09 to the New Model MT-09, which has a GBRACING filler cap. I can't pinch the outside of the filler cap unless it has a Knob or a hexagonal hole in it. I am satisfied with the new model! View detail
Fits: HONDA , HONDA XR230, HONDA XR250 Motard, SUZUKI 250SB, KAWASAKI D tracker, その他
No more carrying Tubes.
MOTARDWheel was able to get a used one.
Tire was also no good, and Puncture and Tube were also no good, so we installed the Tube Eliminate Kit while we were at it.
Spoke nipple was also dirty with rust, and the welds on the rim had been roughed up with a grinder, so it took a long time to prep the surface.
Rim with Stages (about 5 cm long) I roughed it up with Leutor to eliminate the (about 10 cm) Next, the Grinder was further sanded with a Wire cup brush. Next, I used a Wire cup brush on the Grinder to make it shallower. (about 12 cm) The rest was smoothed by tracing the wire cup brush area with a BrassCup brush.
The nipple is also brushed all around with a wire cup brush, then brushed with a Brass Cup brush to remove scratches. Finally, degrease the nipple with a cleaning thinner and remove iron dust with an air gun. In addition, the Instruction Manual says to wash with Alkali detergent and dry. However, I didn't like rust, so I wiped it with Brakes cleaner.
The rest of the work was done as per the Instruction Manual.
Assembling the Tire was easy with no Tube.
After 3 days of air injection at 3 kg/cm, we assembled the large sturdy unit into the vehicle and completed the assembly.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA TT250RAID, YAMAHA TRICKER, YAMAHA TT250R, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA DT230 LANZA, SUZUKI VanVan200, SUZUKI VanVan200Glass tracker, SUZUKI V-Strom250, SUZUKI DRZ400S, SUZUKI DRZ400SM, SUZUKI DRZ400R, SUZUKI DR250S, SUZUKI DRZ400, SUZUKI DR250R, SUZUKI DJEBEL250XC, SUZUKI DR250, SUZUKI DJEBEL250
Exactly to CRF250RALLY.
Used for CRF250RALLY.
Previously, DAYTONA's Motorcycle CoverSIMPLE LLSize To
I bought this one because it was partially torn after 2.5 years of use.
DAYTONA's Cover was slightly open at the feet.
This product is about to cover up to the foot limit.
It also has Rubber in the front and back of the feet and does not seem to flutter in the wind.
However, I do not know how many months Rubber will last.
It is designed to be stopped at the bottom and middle with a buckle.
It is unlikely to fly or flap even in some wind.
There are holes for ventilation in the area that hits Mirror.
It also seems to have good breathability.
View detail
Fits: YAMAHA YZ400 F, YAMAHA YZ125, YAMAHA WR400 F, YAMAHA WR250 F, KAWASAKI KLX250, KAWASAKI D-TRACKER X, KAWASAKI D-TRACKER, HONDA XR250, KAWASAKI KX100 95-17, KAWASAKI KX80 90-17, KAWASAKI KX85 90-17, YAMAHA WR250 R, YAMAHA WR250 X, YAMAHA WR426 F 01-02, YAMAHA WR450 F 03-04, YAMAHA YZ250 90-03, YAMAHA YZ250 F 90-03, YAMAHA YZ426 F 00-02, YAMAHA YZ450 F 03, YAMAHA YZ80 90-17
Convenient SST.
This is the tool needed to remove the InnerCartridge of the inverted suspension. Convenient and easy to use, but a bit expensive. View detail
Fits: KAWASAKI KX125, KAWASAKI KLX450R, KAWASAKI KLX250SR, KAWASAKI KLX250ES, KAWASAKI KLX250, KAWASAKI KDX220SR, KAWASAKI KDX220R, KAWASAKI D-Tracker, HONDA degree, HONDA Africa Twin 750, HONDA XR250R, HONDA XR250 Baja, HONDA XR250, HONDA XR230, HONDA XR250 MOTARD, HONDA XLR250R, HONDA XLR250R Baja, HONDA XLR250R, HONDA XLR250R Baja, HONDA XLR200R
The usual guy.
Stable Red Pad, no doubt about it. This is the only choice. View detail
Fits: KAWASAKI KDX250SR, KAWASAKI KLX250, KAWASAKI KLX250ES, KAWASAKI KLX250SR, SUZUKI 250SB, SUZUKI DF200, SUZUKI Jebel 250, SUZUKI DR125S, SUZUKI DR200, SUZUKI DR250S, SUZUKI DR250R, SUZUKI RMX250S, SUZUKI TS125 Hustler, SUZUKI TS200R, KAWASAKI D tracker
easy to do
[How is it used?
I keep it in my Parts box as a spare for Races and practice. Recently, I often organize Races or help out as a marshal rather than attending Races, so I can help people in trouble if I have it with me. It's called "Aruyo Osan", isn't it?
Was the one you received as per Image?
As per Image, Off car Lever has always bought this Series from DRC.
They are usually cheaper than OEM Parts and often in stock, which is a big help.
Was the installation difficult?
I haven't used it yet, but I just need to remove one Nut and one Pivot bolt1 pc.
It is a good idea to clean and Grease up at that time.
It is quite dirty, and if sand gets into it, it can become abrasive and the Holder can become thin and rickety. There is nothing more stressful than a rickety clutch.
I even put in a KITACO Shim to adjust for rattling.
How was your experience with it?
DRC's Lever is not that different from OEM, so there is no problem.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've already written about it, but it's cleaning Grease up, because Clutch operation is important for Off cars.
View detail