Reviews
Fits: KAWASAKI Z125 Pro, KAWASAKI Ninja 650, KAWASAKI NINJA250R, KAWASAKI NINJA2 Helmet50RSL, KAWASAKI NINJA400, KAWASAKI ESTRELLA, KAWASAKI ZrX1200ZrX1200 DAEG
Used for Z250SL
Used for Z250SL There was an indication of compatibility with Ninja250SL but no mention of Z250SL.
Connect under the tandem seat.
View detail
It's almost same as genuine parts
I used to buy the genuine parts of Kawasaki but I don't see any diffrences on this brake shoe between the genuine and OEM. To sum up, the performance is ok and I will buy it again if any chance in the future. View detail
Fits: KAWASAKI ER-5, KAWASAKI GPX600R, KAWASAKI KLE500, KAWASAKI KLF220, KAWASAKI Eliminator 600, MAGNI 1000 Australia2, MOTOGUZZI 1000 Ditna RS, bimota YB-4, bimota YB-6, bimota Dietsch 1000, bimota Flannel 1000, HONDA CB1100F, HONDA CB1100R, KAWASAKI 1000GTR, KAWASAKI 250TR, KAWASAKI EN400, KAWASAKI EN500, KAWASAKI EX-4, KAWASAKI FX400R, KAWASAKI GPZ1000RX
Anyway cheap
I'm using Windshield IRIDIUM, but it's hard to tell how burned the Plug is, so I'm going back to regular Plug.
I'll ride it for a while to see how it burns, since it is so cheap.
View detail
Fits: HONDA CB125R, HONDA CB250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, YAMAHA NMAX155, YAMAHA YZF-R3, YAMAHA MT03, HONDA CB300R, HONDA CBR500R, HONDA CB150R, YAMAHA CYGNUS X125, YAMAHA MAJESTYS, YAMAHA CYGNUS X, YAMAHA YZF-R25, YAMAHA Zeal, YAMAHA YZF-R125, YAMAHA TZR250R, YAMAHA SR500, YAMAHA SRX400, YAMAHA SR400
I'm generally satisfied!
I purchased the L Size for my CB250R for about half the list price.
The compatibility chart lists CB250R as L Size, but in reality I felt that the Motorcycle Cover was a little short in overall height.
Specifically, I am worried when there is snow on the ground because I can see a little of the Wheel in the back as shown in the photo. (I guess I am too nervous).
The front Wheel is also hidden when the Cover is extended all the way to the end, but it may shift and stick out a little in wind or other conditions.
For now, we decided to wait and see until spring.
However, we are otherwise satisfied with the Large change in use.
I especially like the waterproof and moisture-proof feature. I used to use their Motorcycle Cover Kizuna on my previous Motorcycle, and when I compared the product descriptions on the Package, the only difference is that it has a flame retardant finish, but the flameproof Motorcycle Cover Kizuna does not allow water to seep through to the Cover in normal rain, and I felt that it has a higher moisture-proofing function. However, I felt that the flameproof Motorcycle Cover Kizuna has a higher moisture-proofing function. (This may be the difference in the number of years of use.)
We recommend buying the fireproof bond because there is no LARGE difference between it and the unbranded bond at the current Net price.
View detail
Mirror arrived cracked.
The Mirror arrived with a crack.
I didn't return it because I noticed it after I installed one of them.
The box is in the worst possible sticky condition.
I think Design is the best. For a properly managed operation.
I would like it mailed to me.
View detail
Fits: KAWASAKI Ninja 250 R, KAWASAKI ZRX400, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, SUZUKI RGV-r250, SUZUKI ST250, YAMAHA TRZ250, YAMAHA XJR400 R, YAMAHA ZEAL, SUZUKI GSX400, SUZUKI GRASS TRACKER, YAMAHA BWS 125, YAMAHA R1-Z, SUZUKI VanVan 200, KAWASAKI Estrella, KAWASAKI BALIUS, HONDA JADE, HONDA HORNET, KAWASAKI 250 TR, HONDA FTR
It is quite good.
Purchased for AxisZ
I was worried about L Size, but I am glad I went with LL because it is easy to hang.
View detail
Fits: HONDA APE50, HONDA APE100, HONDA BROS, HONDA CB-1, HONDA CB1000SF, HONDA CB1100, HONDA CB250T, HONDA CB400SF, HONDA CB400SS, HONDA CB500FOUR, HONDA CB750, HONDA CB125, HONDA CB125T, HONDA FTR223, HONDA GB250, HONDA HORNET, HONDA JADE, HONDA SL230, HONDA SPADA, HONDA VRX400
the screen is good
I like that the clear screen is clean.
It bends well too.
It's nice that it's easy to install.
However, the screen cracks over time.
I don't know why.
However, the price is cheap so I can forgive it.
I hope the screen is not broken -------------------------------------------- --------------- The clear screen is clean. It is also good to bend. It is also easy to install. However, after time, the screen splits. I don't know why. But the price is cheap and you can forgive. I hope the screen won't break Powered by Google Translator
View detail
Fits: KAWASAKI ZEPHYR400 χ, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI ZZR600, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZXR400, KAWASAKI ZX-9R, KAWASAKI ZRX400, KAWASAKI Z750S, KAWASAKI Z750, KAWASAKI W800, KAWASAKI KLE400, KAWASAKI EX-4, KAWASAKI ER-6f, KAWASAKI ER-6n, SUZUKI GSX250FX , KAWASAKI VERSYS, KAWASAKI BALIUS2, KAWASAKI BALIUS
good-looking
It looks better. There was a little rattling, but it works fine. View detail
858 and 859 for V str 650.
The OEM pad on the V-Stroke was not very good, squeaking and slipping, so I quickly replaced it.
The rating is normal because it has just been installed and has not been run yet.
I was torn between sbs and Mega alloy, but I chose Mega alloy because I had a good feeling about RKJapan's Fine alloy when I used it on my moped.
I see that the Pad surface is slippery. It seems to work well.
What bothered me the most was that the OEM Fluid was already stuck in place after less than a year.
That being said, I installed it with Plate for now to stop the crying. I am looking forward to going for the next run!
View detail
Easy installation and effortless!
I was worried about the wiring, but it was easy even for me, an amateur, to install the unit as there was no need to separate the wires. View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Motorcycle Covers are all the rage now.
Easy to install, well thought out. Expect durability. View detail
Ideal for the time being
I am pleased with the actual color against the color humidity, which is exactly what I expected. The luminous intensity is not as good as LEDs, but nighttime driving in the city with streetlights is not a problem. When entering Tunnel during the daytime, it is difficult to see where your car is illuminated. I think it is a good choice for inexpensive and temporary use. View detail
Standard number
It's a Honda specified number, so it's a consumable that can be used without any difficulty. View detail
Expecting durability
[How is it used?
The Red Pad used on the Rear brake of my commuter ESTRELLA has reached the end of its useful life, so I replaced it. I used to ride my commuter ESTRELLA with a combination of a Golden Pad on the front and a Red Pad on the rear, but after 5,200 km, only the Rear Red Pad had completely run out of friction material. I tend to use the Rear brake a lot due to my riding habit, but even when I was riding other motorcycles with the same combination, I never lost the Rear pad like this. The reason may be that my current commuting route is 100 km round trip, most of which is on main roads, and I have been using the Rear Brake more frequently than before.
When replacing Brake Pads this time, we chose HYPERSintered, the same DAYTONA pad that is particularly durable.
How was your experience with it?
I have only driven about 500 km since the replacement, but I feel no particular discomfort using the rear brake as I have in the past. I am satisfied if the durability of the brake has been improved as I had hoped.
We will also see how much the load on the Disc Rotor has increased due to the increased durability compared to the Red Pad.
How did it compare to other products?
So far so good compared to Red Pad. If the durability increases and aggression to the Rotor is not a concern, I would be happy to HYPERSintered both front and rear.
[Points to note]
Since replacing brake pads involves removing and installing the caliper, ask a motorcycle shop to do so if you are unsure about maintenance.
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Mobility Outclassing!
Used for Initial Model TW.
So far, it's been a regular Plug.
Replaced with this product and startup changed.
I did
The stability during Idling was also increased.
I think
TW is a single cylinder, so it's a good cosmetic choice.
I think
View detail
Fits: YAMAHA BirdCity125, YAMAHA NMAX125, YAMAHA CYGNUS X, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ESTRELLA, KAWASAKI ZZR250R, KAWASAKI ZZ-R250, KAWASAKI ZZR250, KAWASAKI ZZ-R1200, KAWASAKI ZXR750R, HONDA CRF100F, HONDA CBR125R, HONDA Ape50, HONDA ADV150, HONDA Ape100, KAWASAKI GPX400R, KAWASAKI GPZ400R, KAWASAKI GPZ900R
Always used Takegawa Drainbolt
Quality and texture information Perfect for installing temperature sensors with magnetic magnets It's good that the color can be used as a point Goods to buy together dn meter, thermometer It's easy to install Better cost performance and comparison to other products WeBike packaging is always great, arriving in a week for delivery and packaging Purchasing concerns, precautions, or advice Care must be taken when installing a product temperature sensor that must be fitted if installing a dn meter or thermometer View detail
Fits: YAMAHA ZEAL, YAMAHA TRZ250, YAMAHA SR400, YAMAHA R1-Z, YAMAHA BWS125, SUZUKI GRASS TRACKER, SUZUKI GSX400, SUZUKI VanVan200, SUZUKI ST250, SUZUKI RGV-y250, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZRX400, KAWASAKI Ninja250R, KAWASAKI Estrella, KAWASAKI BALIUS, KAWASAKI 250TR, HONDA HORNET, HONDA JADE, HONDA NSR250
I need size figures written down. (´-ω-`)
SYM's NHT125 (L/W/H:2,068×860×1,195), but I never imagined that it would be a pincushion with the whole bottom half exposed when covered.
At any rate, I've managed to replace the MT-10's cover with one that I think will be useful, although the MT-10's is now spick and span. (´-ω-`)
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
A slightly better one.
I have been using a cheap Chinese one I bought from Amazon.
I used to have to put on and take off the cover for a LARGE amount of time, and in the summer, I was sweating before I left.
This makes it a lot easier than those. It's also flame retardant and seems to be Large sturdy even if you don't wait a bit to apply it (for now).
Anyway, I don't want to go through the process again of applying Cover, putting my hand under the Motorcycle, applying Buckle, and so on.
However, I wonder if the holes on top of the Cover to release moisture are functioning properly.
I would like to see more products like this from other places to compete.
View detail
Fits: KAWASAKI BALIUS [BALIUS] I B1-B4, KAWASAKI BALIUS [BALIUS] I B1, KAWASAKI BALIUS I B4, KAWASAKI BALIUS [BARIOS] II B1-B4, KAWASAKI BALIUS [BALIUS] II B1, KAWASAKI EL250 E1-E2, KAWASAKI BALIUS [BARIOS] II B4, KAWASAKI EL250 E1, KAWASAKI EL250 E2, KAWASAKI ELIMINATOR 125 [ELIMINATOR] A1-A2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2-B3, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B2, KAWASAKI ELIMINATOR 250 [ELIMINATOR] B3, KAWASAKI ER500 A1, KAWASAKI ER500 A1-A3, KAWASAKI ER500 E1-E3, KAWASAKI ER500 A3, KAWASAKI ER500 E1, KAWASAKI ER500 E3, KAWASAKI ESTRELLA [Estrella] B
Mounted on ZZr250
Mounted on ZZr250
SelfStir was a tough car model,
After replacing it with this one, that has been alleviated.
I guess it is a standard Custom for ZZr250.
View detail
Fits: KAWASAKI ESTRELLA CUSTOM, KAWASAKI Estrella., KAWASAKI Estrella RS, KAWASAKI Estrella RS Custom
The sound will be Large, but it will run Quickly.
The sound is LARGE, but not raspy, like a single cylinder with a good exhaust system. I was a little confused because I liked the OEM's quiet exhaust system, but I was glad to hear it because I felt it ran quicker because of the better exhaust.
I can't say if it is resistant to Rust or not until I see it, but the texture is good. The sound will get louder if I use it for a long time, so I'll probably replace it after 10 years for durability. I think it is still a good value for the price. I will also buy the exhaust pipe because of the good impression. If I change the exhaust pipe from front to rear, I think I have to change the main jet. If it is just the exhaust system, you don't need to change the carburetor.
Large satisfactory Exhaust System throughout.Recommendation.
View detail