Reviews
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 14mm / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61743_TS.jpg)
Original Japan Daytona x Nissin 14mm axial . Took 3 days to arrive to Singapore from mailing date .
Easy bleeding during installation . Upgraded from 11mm to 14mm axial. Love the lever feels. Installed on Yamaha Vixion-R 155 . View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000 MkII, KAWASAKI Z1000 (air-cooled)
Maniacal Parts
I've been wondering about buying it for a long time … it's just a stick.
However, I think you can experience it.
For example, if you intentionally put a load on the Front and drive into the Corner, the Wheel turns smoothly, and the suspension moves well and feels light!
I just wondered if it is a Maniacal Parts, like … only for those who understand.
View detail
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
Sensor
I received a package today. The sensor is the one I would need. BUT!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! -------------------------------------------------- -------- I received a package today. The sensor is the one I would need. AIM!!! The little sensor was put in a box 15 times larger and stuffed with a bunch of air bags. As a result, I paid an additional 28 euros for Delivery, on top of the 15 I paid at the beginning. And the sensor is worth €18! Powered by Google Translator View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Replace rusted Bolt and Cap Nut
The mounting bolt and cap nut of the rear suspension have rusted and were replaced to refresh them.
The replacement was done at the same time as the AxelShaft, so it is incidental.
It doesn't look much different at a glance, but I feel better when it is clean.
View detail
![TRAD Type1[Trad type1]Front disk rotor](https://img.webike-cdn.net/catalogue/images/100295/T-21HZ_1_TS.jpg)
To Refresh Disc Rotor
I purchased this for use with my Kawasaki Z1.
I purchased this disc with HoleType because the OEMDisc Rotor was approaching its wear limit and I wanted a custom look.
When we removed the STD Disc for replacement, we found the difference in weight between the STD Disc and the Hadrill.
Along with braking power, we expect the weight difference will also change the driving experience.
Rotor replacement is not a difficult task if done carefully.
The bolt hole where the rotor bolt was removed was lightly cleaned with M8 fine tap, Locktite Blue was applied to the bolt, and the bolt was fastened at 26 N.m.
Pad should also be replaced with a new one.
View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900)
Z1R
The Chain Adjuster on my Z1R was dirty and I was concerned about it, so I replaced it at the same time as the Axle Shaft. I am not sure how well it works, but I am Large satisfied with my car which is getting cleaner and cleaner. View detail
Fits: KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000, KAWASAKI Z900 (KZ900), KAWASAKI Z1000 MkII, KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR)
I purchased this for an external Stemfor replacement.
The quality is fine and well made. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Gentle on the hands!
I purchased Handlebar Grip Soft Type.
I think the design, texture, and grip are very good and will be useful for touring.
Since my Motorcycle is wearing Handlebar Weight and Bar End, Penetrating." A Type would be appreciated.
View detail
![[Xess] YB Narrowed Handlebar](https://img.webike-cdn.net/catalogue/images/12600/3-k-t_00092_TS.jpg)
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
Nice, not too naughty
I was looking for a YB aperture and after comparing and contrasting, I bought it.
Not too naughty for z900rs, Large person squeeze.
Both city driving and Touring have become easier.
The only thing is that the Plating Process does not produce any color.
At least give us Black color as well.
View detail
Fits: KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2
Marshall
Cat Mark is the best Parenthesis. View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R, KAWASAKI Z1000MkII, KAWASAKI Z1000LTD, KAWASAKI Z2 (Z750 FOUR), KAWASAKI Z2 (750 RS), KAWASAKI Z750FX, Others Universal
Single-strand, low friction
The Accelerator Wire embodies the wishes of Mr. Mameshiba, who passed away last year, and is a gem of low friction with no relay points in the middle and a focus on inner material.
Although the Wire moved lightly even if nothing was done, Bell Hammer Gold was sprayed on the Wire a little at a time, and the Wire was hung and stored so that it would be evenly distributed inside the Wire.
It makes all the difference if you do this.
View detail
Stable quality
Purchased for my ZEPHYR750. Second time.
The first time, there was no configuration for 750, so I called Nagai Electronics to special order one, but this time I bought this one, which was made into Items.
Stable quality. It is still good. I used the previous one for almost 20 years, and this one will last for a long time too.
View detail
It was the best Size for W800.
I replaced the previous Type, and the size seems to have changed. I thought it was Large and sturdy.
It was the best size, completely covering the front and rear tiers with the Center Stand hanging down.
Moreover, it was exquisite that the Limit did not stick to the ground.
The fabric seems to follow the fabric from the previous MODEL, so there seems to be no concern about waterproof and durability.
The sealing tape at the seams seems to be firm, but in the past I have handled it roughly and the tape almost peeled off, so I try to handle it carefully, especially when taking it on and off.
Also, the bike is used in a covered parking lot where there are gusty winds, and the side cover has been scratched when the cover flaps.
Nevertheless, Balance's performance and price, which provide long-term protection under the current conditions, are unparalleled in quality.
The lower part of the cover can be adjusted to a very narrow range, and the belt near the center can be securely fastened, so that flapping can be suppressed to some extent.
As described above, the basic functions as a Cover are perfect, and it is made to be less prone to defects.
The black fabric does not stand out, and the color-coded lock holes on the front and back are designed for ease of use and security.
The cover is well made and is useful as a cover with waterproof function, protection, strong fabric, durability, and security effect.
View detail
Fits: KAWASAKI Z400FX, KAWASAKI FX400, KAWASAKI Z1, KAWASAKI Z2
I knew it Marshall.
Marshall and Cat Mark are the best.
Mounting ponting.
View detail
Fits: KAWASAKI Z750, KAWASAKI Z1, KAWASAKI Z2 (750RS/Z750FOUR)
YB aperture looks good.
The aperture of this product fits CB1000SF.
I used another one that was still narrowed down, but the handling etc. was not so good.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail