Reviews
The size is just right and the texture is good.
Used in 2008 YZF-R1.
LengthSize is also really Exactly.
I did not originally intend to use parts cleaner, but I was able to get in without any difficulty without using Bond paint parts cleaner.
View detail
For NGK NGK ESTRELLA
As expected of NGK, it is well made.
Idling was also anteaed.
View detail
![[Stock Lever] Brake Master Cylinder Kit [Horizontal Type 5/8" / Tank Separate Body Type]](https://img.webike-cdn.net/catalogue/images/105373/61738_TS.jpg)
NisshinBrake master cylinder kit (Horizontal Type)
I wanted to finish bleeding the air out of the brake fluid in one go, so I replaced it together with the brake hose replacement. The touch of the brake also worked better than before, and I am satisfied with the large change. I recommend everyone to dress-up the front area! View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
Good variety of color variations
Standard NGKPower cable, used for CUB.
Speaking of NGK, I had always thought of Red and BlueCable images, but I was surprised to find that NGK has a wide variety of color variations.
I was curious about the Yellow color code + BlackCap, so I bought it, and the actual color was a nice bi-Bit color as well.
View detail
ALCAN hands iGrip
I have used it for VTR250 and MT-03, and I bought it again this time. The color is Orange red to match the body color, and it is a good accent for the handlebar. When I installed it, I used a small amount of glue to prevent shifting and decided not to use wiring. View detail
Fits: KAWASAKI KZ1000, KAWASAKI Z750D1, KAWASAKI Z1000MK2, KAWASAKI Z750FX-1, KAWASAKI Z1R-1, KAWASAKI Z1R-2, KAWASAKI Z400FX, KAWASAKI Z1300
Purchased due to missing
I think it's good, I looked for OEM Parts and this product was a hit. View detail
Oil change
It's cheap and the performance is the same as OEM parts, which is good enough for me. View detail
I wanted Cap.
I purchased this product to connect to the Ignition coil in Mukawa and wanted to unify the colors.
Cutter off the adhesive bonding the Cap to the cord, peel off the Cable outer skin of the Mukawa Ignition coil, insert it, and fix it with adhesive, and you are done.
The excess Cable of the product in question is used in place of the Cable attached to the OEMCoil.
This would have been unnecessary if caps in a variety of colors were available, but they are not.
Even if only the cable is replaced, the idling is stabilized and the long-used OEM product is refreshed.
View detail
Power cable & elect. module Dev'moto
Bonjour from France Thanks you for quick shipment of my order , i fixed it on ma yam sr 125 in addition of a new electronic module Dev'moto(made in France) with an iriduin plug already than replace the TCI -dead-:( the result is more better ( already too with the new module) cold cranking + little better torque at low rpm, and more i could reduce my idle setting ... so very happy with my purchase ... voilà ! View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
The product was as good as OEM Product
I will be the first to search your Net for parts that are no longer available from the OEM Product. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
![Semi Radial Brake Master Cylinder Kit [Angle Horizontal Φ19]](https://img.webike-cdn.net/catalogue/images/105373/62411_TS.jpg)
For Upgrade of front brakes master
Upgraded TRX850 front brakes master with NISSINsemiRadial brake master.
I opened the package and checked the details and it is very QUALITY and the accuracy is perfect!
Installation on the car body is also completely hassle-free, as the product is guaranteed to fit the car body.
The braking feel is completely different from that of the OEM, with braking power rising quickly from the beginning of the grip and very good control after the grip has been applied.
The design of the product is also compatible with out-of-print cars.
The work kill was set as intermediate because the brake fluid had to be drained once and the air was drained again after installation.
Please refer to the following URL to see the installation work as it is uploaded in the diary.
https://imp.webike.net/diary/251725/
View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
Article of good quality
Product of good quality and arrives fast. Well pack and arrives in good order. Parts are genuine. Tracking facility are reliable View detail
Fits: YAMAHA XT500, YAMAHA XT400ARTESIA, YAMAHA XT250, YAMAHA XT200, YAMAHA XT125, YAMAHA XS750 SPECIAL Knife, YAMAHA XS650 SPECIAL, YAMAHA XS400, YAMAHA XS400, YAMAHA XS400, YAMAHA RZV500R, YAMAHA XS250, YAMAHA XJ750E, YAMAHA XJ750E, YAMAHA XS400, YAMAHA RZ250 RR, YAMAHA RD50, YAMAHA RZ250 RR, YAMAHA RZ125, YAMAHA RZ125
Power up by replacing Plug, Power cable and Hyper Ignition Coil!
Installed on SUPER CUB110JA44.
Removing the leg shield was a bit of a hassle, but installation was easy.
If you have about 15 minutes, I think you can do it.
I thought the cord was too long and wasteful for my Motorcycle.
If only it were a little cheaper.
As for the interval of running, since both NGKDXPlug and Mukawa's Hyper Ignition coil were replaced, I think that the ignition is now running smoother and stronger than before, although it is difficult to determine which one is working.
View detail
Fits: KAWASAKI VULCAN1500 Classic, KAWASAKI VULCAN1500, KAWASAKI VULCAN1500, KAWASAKI VULCAN1500, KAWASAKI Vulcan., KAWASAKI SUPER SHERPA, KAWASAKI SUPER SHERPA, KAWASAKI ELIMINATOR 125, KAWASAKI EPSILON150, KAWASAKI EPSILON150, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLARS, KAWASAKI ESTRELLA, KAWASAKI Z1300/KZ1300
SUPERResponse
I replaced it at the same time as the MotoDXPlug, so I don't know which effect it had, but I was able to feel the SUPERResponse that is mentioned in the Package!
Low speeds are better and Axel is now on better.
I think it is because it is a Single engine, and the effect is easy to understand.
I love that it is a Single engine, so it cost less than 5,000 yen for both, and it is very cost effective!
View detail
Fits: Others SPARTACO, MOTOGUZZI 1100SPORT・Carburetor, BMW R100R, YAMAHA XS400SP, YAMAHA XV535/S, YAMAHA XS1100, YAMAHA TY250ZTY250, YAMAHA TY350R, YAMAHA SR400 LIMITED EDITION, YAMAHA SR400, MOTOGUZZI Norge 1200GT, YAMAHA TY250Z, YAMAHA SR500, YAMAHA SR500, MOTOGUZZI Quota 1100ES, MOTOGUZZI GRISO1100, YAMAHA SR400, MOTOGUZZI California・Special sports, MOTOGUZZI BREVA1100, MOTOGUZZI California・Stone touring
Expected durability
I am a SR400FI user. In Korea, Denso's iridium plugs are famous and used a lot, but I personally like NGK, a genuine manufacturer, so I purchased NGK iridium plugs. Since only genuine spark plugs have been used, Iridium's durability and performance are expected. -------------------------------------------------- -------- SR400FI user. In Korea, Denso's Iridium Plug is famous and used a lot, but I personally purchased NGK Iridium Plug because I like NGK, a genuine manufacturer. Only genuine ignition plugs have been used, so Iridium's durability and performance are expected. Powered by Google Translator View detail
Fits: HONDA CBR400F, HONDA CBX750F, HONDA CB1100F, HONDA CB1100R, HONDA CB900F, HONDA CBR1000F, HONDA CBR600F, HONDA CBR750, HONDA VF400, HONDA VF750F, KAWASAKI KR-1/S/R, KAWASAKI Z750FXII/III, KAWASAKI ZR-7/S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZX-7R
It is over the price
I have installed this on a 2008 ABSMODEL CB400SB. The reason why I decided to install it on my CB400SB is that the OEM Master Cylinder is 15 years old this year and I thought it was time to change the overhaul to Semi-radial. This year's CB has a double disk, but since it is a single-press 3-pot, the time lag after the OEM lever is held is far from my ideal brake with a large time lag. I think it is a shame that the CB is equipped with a single-press caliper, because it eliminates the good qualities of the CB. (As I thought, the single push Caliper was still improved to opposing 4 pots when the Model was changed). I have changed various pads to improve the time lag and changed the brake fluid to BF4 from WAKOS to improve the time lag a little, but it is a characteristic of Caliper. But after I installed Nisshin's Semi-radial master, the time lag is gone and I am very satisfied with it. To be honest, I thought that Semi-radial would not be much different from OEM, but it is not at all. With the OEM master, I felt the front fork suddenly start to lag after I hold the lever, and then I felt the front fork start to lag suddenly! The Lever touch is much stiffer than the OEM. The price is not too expensive, and I am satisfied with the Large brakes because I have no more complaints about the Brakes over the years.
Here is the installation review
First of all, the brake switch will not be long enough, so wiring will be required. I also expected this, but if you are using a custom lever, you will not be able to use it. (I remember that Nisshin only offered Lever in Silver color in this Semi-radial, but there may be a Black color as well.) I think this is one of the best features of this Master Cylinder. The air bleed was very easy to do, which is one of the good points of this Master Cylinder, and I think it will take less than 30 minutes if you follow the normal procedure. If you hold the lever at an angle to the body of the car, the air in the Master Cylinder can be easily released.
I personally felt it was one more Review.
The convex part that holds the banjo bolt faces almost directly down, so the direction of the hose is limited to either directly above or directly below the bolt. In my case, because I have an ABSMODEL, it is impossible to use an external Hose, and since the angle of the banjo bolt cannot be changed, I ended up with a mounting position that puts a lot of load on the Hose, either directly above or directly below the bolt. The Hose is not designed to be installed directly above or directly below the Torque wrench, so the Hose would have to be installed directly below the Torque wrench. If the convex to hold the Hose had come out from the side, there would have been no burden on the Hose, so it would have been better to have the convex on the side like the OEM. (I plan to consult a Motorcycle shop at that time as the Brake hose is old and I plan to change it.) If you have a mesh hose and can change the direction of the banjo, I think you should prepare a diagonal banjo so that you can work smoothly. I had to re-grease the moving parts of the lever because they looked dirty. I thought I could see the Fluid if I changed the direction, but I didn't because it would have put a load on the hose. I have a water temperature gauge next to the inner cowl, but it is very difficult to see the tank. I used M10×1.25 bolt from Swage line.
View detail