It's probably for the best.

Everything is in balance.
There is no uncertainty whatsoever. View detail

Blue empty parking.

Used for DUCATI 996.
I bought this because I am renting and park Blue empty, but I never want to let it rust because it is a rare car.
The rainy season is absolutely RECOMMENDATION.
It also has a hole for a lock, which is a little expensive, but it is a must-recommendation for those who park Blue empty. View detail

Black still seems to be vulnerable.

Used outdoors in full sun for less than 1 year and 2 months after purchase.
What was originally Black has faded and turned gray.
It also tore like a rip, so I had to use curing Tape to plug the hole for now. Is it still susceptible to deterioration by sunlight if it is Black?
I am using two more in parallel, Black and Silver. the Black is about a year old. It has faded a bit but still seems to stand up to the test.
I thought I was using them the same way, but I am wondering how a difference of two months can make such a difference.
Silver is about 5 months old. It is still clean.
I was lucky that the exhaust pipe was not touched.
Since the original price is over $8,000, it would be nice to have a little more durability. However, the Motorcycle Cover is a consumable item. However, Motorcycle Covers are consumable items, so I am not that dissatisfied with them since they cost around 4,000 yen at Sale and I prefer black. But I think I will get the Silver color next time. View detail

Stable braking powerGolden Padχ.

I am not looking for an absolute increase in braking power, but since I use the RRBrake a lot, I feel that it heats up and wears out quickly. I've chosen Sintered padGoldenχ which is highly resistant to fading, and the control is not bad. View detail

Controlability

Before the replacement, there was rust on the surface (especially on the back side), and it did not work comfortably when I stepped on it, and there was a strange noise, but after the replacement, the noise disappeared and it works well and is easy to control. View detail

The color of the color insert that can be glimpsed is Race ish.

I did not choose the rear brake because of its effectiveness, but because I am a brembo believer.
I liked it because of its brembo-like Controllable nature.
I like the vermilion color of the back plate because it creates a race-ish atmosphere.
Since it is a rear brake, durability also depends on the individual, but it seems to work for a long time.
Since the bite is not attached immediately after replacement, you may feel a lack of potency, so pad break-in is a must.
I have not used this Pad in Circuit yet, but it is easy to use in OEM same etc. View detail

Gone.

Within a month of using it, the wind blew it away. I only had to put it on and wrap one band around it, so when I came home on a windy day, only the band was left and the Motorcycle was completely naked. View detail

UV sensitive, torn after one year.

The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail

BremboOEM Product

Reliable Brembo OEM.
No complaints for Touring use.
CC Type (Blue color) I personally found this one easier to Control. View detail

I'm going to be honest with you.

To be honest, I have not yet installed it.
Since actual use is still about six months away, I will write my impressions first.
So, the evaluation is a prediction.

We began by gathering information from various sources before making the purchase.
After all, brembo is installed as OEM, but there is no information on JapanFOR JAPAN MODEL.
I asked the Shop in Italy and received an immediate response, and then asked the Japan distributor to confirm the answer.
PLOT." The lousy reply is that there is nothing that fits in a store called
for "Koken" I received a very detailed explanation from Mr. Kato, who was so kind that I was bowled over.

According to the report, this SA has better performance than the OEM, so we decided to purchase it.
For OEM Product, the end is a number and OEMOption is AlphaBed.
Italy recommended SR's RACING, but I decided against it because it seemed to wear out too quickly.
I was informed by webike that I could get a fit, so that's how I decided to buy it.
However, my wife reported that it arrived with a sound of rattling, and when she opened the package, she found that it was just as shown in the picture.
The packaging was a little more careful than I would have liked, as the pad was placed in a box with a small shock-absorbing cushion on top. View detail

A little short.

I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time. View detail

Genine Brembo Rear Brake Pad SP Compound

This was a set that I needed to replace the pnes I previously had in the bike. I wanted to try and match the rears with the front but not quite as agressive for the rear as it is not used that much on a track day. Not hard to find the right pads for the rear caliper, it's a Brembo 2 pot version, pretty standard. I used the tools Webike provide and then cross referenced with Brembo website for my own peace of mind. I had a few other parts in my order including the RC front pads which I was matching with. Because I combine some of my parts into one order, the cost of shipping is a lot cheaper than getting them individually. EMS is who I use these days as they just get the job done fast and efficiently. My order arrived in 5 days from Webike warehouse sending my order. What's not to love about that. The pads came in a Brembo packet and aslo Webike secured them in a bubble wrapping for safety and to keep my other parts safe from damage in transit. These pads are a road compound but are plenty for a track day as I personally do not use the back brake a lot anyway. They had a good matieral on the pad, plenty of meat on there for sure. They performed very well even though the conditions on the day weakened as the day went on. I was still very impressed with the pads anyway. Great work Webike, very pleased with this purchase. View detail

Genuine Brembo Brake Pads for Brembo 4 pot caliper.

I had a customer in who had upgraded their calipers to some nice Brembo ones but then they needed some new pads. As they did not know what pad code they needed it was pretty easy to find the right ones for the caliper they had. Standard 4 pots. After I knew the part numbers, finding them on Webike was super simple. Just type in the code and away you go. The price was really good from Webike and combined with some other parts in my order, I had them all shipped together to save on shipping separately. I got all my order in 100% perfect condtion in 5 days from shipping. The pads already come in the Brembo packets wqhich do actually protect the pads from damage and debris gettin inside which could contaminate the pad material. Really good pads, you can see the sinter material by just looking at them. There was no debris of excess pad materieal inside the packet which is always a good sign. Once you get them a few 100 miles in, the pads just get better and better. Brilliant purchase. View detail

Natural Suite

Rear Brake Disc Rotor of TRX850 was replaced with MADE IN SUNSTAR.
Since the Front Brake Disc Rotor was replaced, the Rear was also MADE IN SUNSTAR.
High safety, optimal tolerance design, limits and challenges are the company's design philosophy.
I sympathized with the emphasis on functionality over design.
The quality of the product is perfect and full of rigidity.
The initial touch with Brake Pads is also natural, and has a nice, natural feel without being abrupt.
I don't know how to describe it, but it's seamless.
Next time I replace the brake disc rotor, I would like to use MADE IN SUNSTAR. View detail

Size did not fit….

I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.

I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.

One of my colleagues at work is a motorcycle rider, so I gave it to him for free.

I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time. View detail

It usually works.

Since the brake disc rotor was replaced with a new one, we also replaced the brake pads with new ones as per the CAUTION of the disc rotor.
We were not looking for a significantly higher coefficient of friction or increased braking force than the OEMPad.
The DAYTONAHyper Sintered Pads, as the package claims, are hard to lose, long-lasting, and effective, with the same features as OEM pads, which is exactly the specifications we were looking for.
It looks simple, like an OEM product, and does not feel uncomfortable when installed on the car body. In my opinion, it is a just fit.
Of course, we do not intend to deny the higher grade Pad made by DAYTONA, and the ability to choose Brake Pads with the specifications required by the User is rather Large welcome.
I don't think there is anyone in Waebig who neglects maintenance of the brake itself, but I believe that the brake performance can be normally demonstrated only when the brake caliper is cleaned and maintained on a regular basis.
If you're feeling nervous, why don't you try Brake Maintenance for your car? View detail

Premium.

When we decided to use the front fork overhaul, we were not sure whether to go with the less expensive OEM or SKF.
When I opened the package and looked at the product, there was no BALIetc. at all, and the finish was very clean,
Also, during the overhaul, I inserted it into the inner fork and felt slightly less resistance than the OEM when moving it. As a result, SKF was the right choice.
The Dust Seal also has a Spring to prevent foreign objects from entering. The difference in the casual appearance is very satisfying. View detail

Fit like a dedicated Cover!

[How is it used?
Used at home Garage

Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression

How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect. View detail

The Cover is perfectly effective even in the rain!

[How is it used?
It is being used on a 2019 Z900.
Purchase Size is LL. usually kept on the only rear.Maintenance Stand is hung.

Was the one you received as per Image?
It is thicker than Image, and my expectations were high that it would be very effective as a Cover the moment I picked it up.
I used to use a non-WaterRegisterance product from the company Cover, but the thickness is noticeably different from that.

How was your experience with it?
I hung the Cover as soon as I received it, and it blocks the sunlight normally without any problems on sunny days.
We were lucky enough to have rain the next two days, so we checked the effect on the car body after the rain stopped, but there was no effect at all inside, and the Waterproof performance was well demonstrated.
Also, since the LLSize is relatively large, even if the maintenance stand was applied to make it taller, it would cover the bottom so that the Wheel would not stick out and get dirty.
The center is also equipped with a belt, so the Cover does not flap around and protects the vehicle body.

[Points to note]
It may or may not be important to note that the Heat Seat can be applied to the area where the Exhaust System hits, but it will not be effective at all if it is applied to the right place, so we recommend that you check the location carefully before applying it.

How did it compare to other products?
The price is higher than the regular Cover made by the company, but considering the waterproof aspect, I think I will repeat this in the future.
What is the rest of the useful life? I guess. View detail

OEM compatible normal disc

Since it is made in SUNSTAR, which is safe and reliable, I have no complaints at all about its performance.
The shape is perfect, of course, and the flatness of the Gold genus machined surface, Edge treatment, etc. are perfect.

Since it is a Rear Disc, it is simply a flat plate, basically punched out by PRESS.
However, unlike inferior products that have BALI on the edge of the PRESS punched out, all end faces are machined.
Excellent quality!

I bought it as DUCATI 900SL for Rear, but actually this size is exactly the same as the disc for Yamaha of the same period.
Compared to TDM's for RearOEM, which happened to be in stock, the size is a perfect match.
In the case of YamahaOEM and DUCATIOEM, the parts that do not hit the pad are painted black (poor parenthesis), but MADE IN SUNSTAR is stainless steel all over.
I chose SUNSTAR for this reason, but some people may feel that the black coating is tighter and better, so it is your choice.

If you choose SUNSTAR, you can rest assured that there is nothing inferior to OEM.
I chose the Hole Type because I like the OEM look and feel of the Hole Type, but if you use the Slit Type, you can differentiate the Hole Type from the OEM Type. View detail