Reviews
UV sensitive, torn after one year.
The 2LSize is too small for the MT09. Also, it seems to be weak against ultraviolet rays, and the part that was exposed to the sun well deteriorated and tore after not lasting a year. View detail
I'm going to be honest with you.
To be honest, I have not yet installed it.
Since actual use is still about six months away, I will write my impressions first.
So, the evaluation is a prediction.
We began by gathering information from various sources before making the purchase.
After all, brembo is installed as OEM, but there is no information on JapanFOR JAPAN MODEL.
I asked the Shop in Italy and received an immediate response, and then asked the Japan distributor to confirm the answer.
PLOT." The lousy reply is that there is nothing that fits in a store called
for "Koken" I received a very detailed explanation from Mr. Kato, who was so kind that I was bowled over.
According to the report, this SA has better performance than the OEM, so we decided to purchase it.
For OEM Product, the end is a number and OEMOption is AlphaBed.
Italy recommended SR's RACING, but I decided against it because it seemed to wear out too quickly.
I was informed by webike that I could get a fit, so that's how I decided to buy it.
However, my wife reported that it arrived with a sound of rattling, and when she opened the package, she found that it was just as shown in the picture.
The packaging was a little more careful than I would have liked, as the pad was placed in a box with a small shock-absorbing cushion on top.
View detail
Reasonable and easier to handle than OEM
I always use this product when changing oils and fats.
It has a Wrench-enabled head on the end, so it is easy to attach and detach, and despite the fact that it is almost functionally the same, the price is lower than OEM, so it is very useful.
The OEM was Stress because removal could not be done without destroying it, but after switching to this one, there is no extra process.
The Wiring hole is another thing I like about Race ish.
View detail
A little short.
I selected it from the vehicle compatibility chart, but the Rear is covered well, but the Front is not covered enough. I can compromise because I use it in a covered parking lot, but it is hard to lock the chain lock. It was a little more.
The texture of the Cover is good. As mentioned above, it is roofed, so I don't think it will be water repellent or strong, but I think it will keep for a long time.
View detail
Great Upgrade
So this was a better option to go than OEM. I was thinking "its ok but I wouldn't spend this much money for the extra performance if I didn't have to". That was a game changer, especially on steep downhills. This caliper does just what it says it will do, give a more progressive feel for your front brake. My bike's front brake was really grabby and not very predictable. This caliper fixed that and made it much more progressive and increase the stopping power. It does have a softer feel that may take some getting used to, but once you do, it's awesome!My braking precision and overall performance is far better. Worth every penny. The billet aluminum also looks better on the bike than I expected. My only complaint is price. shipping price is high.no economy shipping anymore.They're dang expensive but hey, not nearly as expensive as a new exhaust.webike too fast. View detail
Genuine Brembo Rear P2 Brake Caliper CNC in black
This was apurchase I had been meaning to make for quite some time. This caliper is an upgrade from the standard one on the MT10. I had always wanted an underslung caliper on this bike since the day I got it and now was the chance to fix that and go for this stunning Black CNC one from Brembo. The standard caliper on the MT10 is top mounted which does cause some issues when you are removeing the rear wheel. There is just too much messing around with spacers and lining up the thing. This was actually ona small sale from Webike so now was my chance to get this caliper. There was a little work to get this to actually fit but I had already sourced a bracket that holds this caliper on the underside of the rear arm. Anyway, Webike took the time and care and wrapped this really well before being shipped. I had this shiopped with EMS and it arrived in perfecg condition in 5 days from shipping. The caliper itself comes in the massive Brembo box and had a ton of leaflets with it. It also came with a nice little QR code on the back so you can check the authenticity and make sure you have not bought a fake. Obviously, from Webike I did not really need to check this as I know they do not sell fake items. I did however check and registered it with my address. The CNC work on this caliper is wow, exceptional. It really is a stunning caliper which is a shame as it is hidden somewhat on the underside of the bike.The bleed nipple threads are perfect, they just slid right in there with no notchiness. The pads that came in this caliper as standard are I'm pretty sure, fast road ones which was a nice touch. Fitting was easy really, it was a simple bolt on. Bleeding was a pain due to the ABS but managed to get all the air out prior to use. I have to say, this is one of my most favourite purchases in a long time. It just makes the bike look really cool and has the added benefit of working a lot better than the standard one. I can now also change the wheel and not have to mess around trying to lone the wheel up too much as it not just slots into palce. I am one very happy customer with this Brembo CNC P2 caliper. Thank you Webike, You're great!! View detail
Pure high performance with no extra features
Of the many brembo Master Cylinders, this was the first to be marketed as a RadialPump.
Strictly speaking, the Cut-out's used for Works machine "RACING" At the time, it cost about 80,000 yen, so only a few wealthy people could afford it, and this is a low-priced version for the general public with a non-cut-out surface finish.
It originally designed for WorksRacer The car is a racing exclusive part, so there is no consideration for the installation of a stop lamp switch, which is required for driving on public roads.
(When it was first released, it was prohibited to drive on public roads.)
It's a good time because now they come with a hydraulic stop lamp switch for public road use.
Nevertheless, hydraulic switches use a portion of the hydraulic pressure to activate the switch, which defeats the purpose of RadialPumping, which is to improve lever touch.
I would not want to use it if possible.
Mechanical Switches are available from various companies, but these are also a bit iffy, as they force you to attach very complicated and delicate objects.
I have modified Lever to operate MechanicalSwitch in a completely different way because it is very intrusive, especially if I frequently maintain the Lever area.
Such Hardship to use public roads." Apart from the "RaceParts", the original RaceParts were very serious RaceParts, so the effect is very effective! The lever touch improves unbelievably.
To give you an idea of the degree of improvement, if the previous operation was a 10-step control from release to lock, it would be 10 times more detailed, with 100 steps of control.
Whereas operations that I thought were full Brake were actually only available up to 9 due to the change to 9→10, with this product I can confidently grip up to 9.9, like 9→9.1→9.2→9.3 ... and so on.
As a result, Brake works better even though changing the Master Cylinder should not make Brake work better.
How to mount the reserver tank, the brake hose routing is different and needs to be redesigned, the banjo bolt pitch is 1.0 (and the brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch needs to be modified, etc. (In addition, brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch has to be modified somehow, and some ingenuity and modification is required to avoid contact with the cowl and meter.
A more powerful successor is also on the market, but it is loaded with extra equipment and heavier than ever.
If your goal is purely to improve lever touch, this is the lightest weight one.
I wonder if the Body rigidity is higher, or why I feel the Touch is better than the high-end version of CNCCut-outMODEL....
View detail
Fits: DUCATI 900SS, DUCATI 998, DUCATI 916, DUCATI 996, DUCATI 748
For home-made footpeg
I purchased this as a Material to create a 900SS (900SL) footpeg.
If you want a footpeg that has a bearing on the pedal axis, is coaxial with the footpeg, and does not have an extreme up or back position, the only decent footpeg left is the AELLA 900SS footpeg made by Kasuno, except for those made overseas.
Then why not just buy AELLA? I would say, but AELLA boasts gorgeous cutting and looks too flashy....
We had no choice but to use a footpeg (Position, stiffness, sobriety, all good) that was sold by GARUDA, but unfortunately it was already discontinued.
In addition, the GARUDA-made footpeg has a special eccentric footpeg receiving structure, and the pedal receiving part is made of POM resin material.
Even if the bearing is not a Bearing, there is no problem in operation, but the rigidity of the Bearing type cannot be beaten.
The problem with the Largeest is that the method of connecting the Footpeg is special and requires a Φ17mm eccentric Aluminum Footpeg.
Of course, Footpeg is also out of stock and cannot be repaired in the event of a fall.
Therefore, we decided to use only the holder part of the footpeg (obtained secondhand) and to modify the footpeg to the Φ8mm bolt coupling type commonly used by other companies, so that the pedal can also be mounted coaxially.
This Pedal is prepared for such use.
The accuracy, rigidity, and feel of operation are all as tight as those of the AELLA products, and the shape is not as gaudy as the AELLA products, so I am satisfied with the large size.
It's too bad that it might be too tight as a fall-for-repair since it's about to be discontinued.
Also, the Footpeg Holder is not originally for the 900SS, and the Footpeg Holder is not made by AGRAS, so the angle of the Shift link does not match (I had to modify the hole position to be 90°).
View detail
Genuine Brembo Brake Pads for Brembo 4 pot caliper.
I had a customer in who had upgraded their calipers to some nice Brembo ones but then they needed some new pads. As they did not know what pad code they needed it was pretty easy to find the right ones for the caliper they had. Standard 4 pots. After I knew the part numbers, finding them on Webike was super simple. Just type in the code and away you go. The price was really good from Webike and combined with some other parts in my order, I had them all shipped together to save on shipping separately. I got all my order in 100% perfect condtion in 5 days from shipping. The pads already come in the Brembo packets wqhich do actually protect the pads from damage and debris gettin inside which could contaminate the pad material. Really good pads, you can see the sinter material by just looking at them. There was no debris of excess pad materieal inside the packet which is always a good sign. Once you get them a few 100 miles in, the pads just get better and better. Brilliant purchase. View detail
Size did not fit….
I bought the same DAYTONA made WaterRegisterntLight when I delivered my motorcycle, but I bought a 3LL because I misunderstood the size chart and it was a little bit Oversized around the Rear.
I bought the LL size after looking at the compatibility chart, but it's a Small size.
Although it is cheaper than WaterRegisterntLight, it is a bit peLePera and unreliable, and the anti-flap Belt is not sewn onto the Cover. (It is included, but it is a separate part.) Inconvenience.
One of my colleagues at work is a motorcycle rider, so I gave it to him for free.
I was actually going to buy LLSize's WaterRegisterntLight, but they were out of stock, so it was somewhat less damaging in terms of Gold amount. (Lol)
Now we will make the WaterRegisterntLight in the size we purchased last time.
View detail
It usually works.
Since the brake disc rotor was replaced with a new one, we also replaced the brake pads with new ones as per the CAUTION of the disc rotor.
We were not looking for a significantly higher coefficient of friction or increased braking force than the OEMPad.
The DAYTONAHyper Sintered Pads, as the package claims, are hard to lose, long-lasting, and effective, with the same features as OEM pads, which is exactly the specifications we were looking for.
It looks simple, like an OEM product, and does not feel uncomfortable when installed on the car body. In my opinion, it is a just fit.
Of course, we do not intend to deny the higher grade Pad made by DAYTONA, and the ability to choose Brake Pads with the specifications required by the User is rather Large welcome.
I don't think there is anyone in Waebig who neglects maintenance of the brake itself, but I believe that the brake performance can be normally demonstrated only when the brake caliper is cleaned and maintained on a regular basis.
If you're feeling nervous, why don't you try Brake Maintenance for your car?
View detail
Easy to install, recommended for beginners
It could be used in the same way as OEM Product.
The product is highly accurate and there were no oil leaks, etc.
Brand-wise, I trust and recommend it.
View detail
It is the best cospa
It could be used in the same way as OEM Product.
The product is highly accurate and there were no oil leaks, etc.
Brand-wise, I trust and recommend it.
View detail
Fee Ring changes!
Just the fact that I changed to brembo makes me happy!
But when I changed Caliper, it was difficult to feel the Fee Ring change, but Radial brake master changes a lot!
Also, it is better to change the clutch lever to CORSA Corta Lever, which is easier to grip and gives a more unified feel.
View detail
Fits: DUCATI SuperSport, DUCATI STREETFIGHTER848, DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI STREETFIGHTER, DUCATI PanigaleV2, DUCATI SCRAMBLER Sixty2, DUCATI SCRAMBLER 800, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 620, DUCATI MULTISTRADA 1200, DUCATI Multistrada 1260, DUCATI Multistrada 1100/S, DUCATI Multistrada 1200, DUCATI MULTISTRADA 1000, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER1100/S
Center presentation
I used it to get the center out of the Caliper fixation. It could be installed normally without any problem. View detail
YOSHIMURA collaboration is the best!
Used on Ducati Deer Bell 1260s.
Since we were replacing the Oil, it was time to replace the OEMOil Filter that had been used since new.
At first, I still thought OEM was the way to go, but when I looked into it, to my surprise, the delivery time was too long, so I started looking on Webike to see if there were any other compatible products available. In the end, I could only find the ones from other Manufacturers and not ours. (I wonder why they didn't find ours.
I checked the official K&A website and found no products that fit this 1260, but I found KN-153 that fits the old model, so I bought it as a trial and installed it successfully. I bought it as a trial and installed it successfully!
By the way, I am super happy because it also comes with a YOSHIMURA Sticker!
View detail
Premium.
When we decided to use the front fork overhaul, we were not sure whether to go with the less expensive OEM or SKF.
When I opened the package and looked at the product, there was no BALIetc. at all, and the finish was very clean,
Also, during the overhaul, I inserted it into the inner fork and felt slightly less resistance than the OEM when moving it. As a result, SKF was the right choice.
The Dust Seal also has a Spring to prevent foreign objects from entering. The difference in the casual appearance is very satisfying.
View detail
Cospa best
[Rear Brake dust is more than OEM. I will repeat this process. View detail
Fit like a dedicated Cover!
[How is it used?
Used at home Garage
Was the one you received as per Image?
Almost as shown in the Image, but somewhat flimsy impression
How was your experience with it?
CinderellaFit, as if it were exclusive to CL250!
Size was perfect.
View detail
Great looks. as a cap bolt….
Do not over-tighten or apply Screw lock agent by mistake, as the material is material and will quickly lick the hex holes.
I want to install it firmly because it is for fixing Stay which supports important parts around Handlebar ….
View detail