Reviews
Fits: DUCATI SCRAMBLER DS FASTHOUSE, DUCATI SUPERSPORT 620, DUCATI MULTISTRADA 1200 PIKES PEAK, DUCATI MULTISTRADA 1200 S, DUCATI ST3, DUCATI SPORT 1000 S, DUCATI MONSTER 795, DUCATI DIAVEL 1200, DUCATI SCRAMBLER NIGHTSHIFT, DUCATI SCRAMBLER MACH 2.0, DUCATI SCRAMBLER CAFE RACER, DUCATI SCRAMBLER DESERT SLED, DUCATI SCRAMBLER ITALIA INDEPENDENT, DUCATI SCRAMBLER FLAT TRACK PRO, DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER STREET CLASSIC, DUCATI SCRAMBLER CLASSIC, DUCATI SCRAMBLER FULL THROTTLE, DUCATI SCRAMBLER ICON, DUCATI SUPERSPORT 750
The maintenance improvement after installation and the visual design is great, but …...
It's no surprise that Doka's dry Clutch is a natural choice for OpeningCover.
Wet Clutch cover. [Color] When set to Clear, the Impact of the visual design is the best!
However, when the difference in temperature is extreme, condensation and emulsification on the Glass surface is very severe. When the difference in temperature is extreme, condensation and emulsification on the glass surface is very severe.
It's dirty and you can't see what's inside, so it's kind of a bad parenthesis (laughs).
However, switching to this Cover will super reduce the hassle when changing clutches!
Since only the clear part is removed from the O-ring, there is no need to peel & attach the liquid gasket.
OIL is also hardly reduced, so that's great to think about!
I think the price is about the same considering the design and quality of workmanship.
What others think of this price for this part is...
View detail
Fits: BUELL S3, KAWASAKI GPZ1100F, KAWASAKI GPZ750F, KAWASAKI Z800, KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI H2SXSE+, KAWASAKI GPZ750, KAWASAKI GPZ1100, HONDA VTR1000F, HONDA VFR800, HONDA VFR1200, HONDA RVF750K, HONDA RVF750, HONDA NC700S, HONDA CBR1100XX, HONDA CBR1000F
I purchased the Motorcycle Cover because it was out of date.
The handling is very easy and the double structure is very good for a Full Cowl Motorcycle Cover.
Also, GSX1300R HAYABUSA (Type 2) I was able to install the Cover with the GIVI Top Case Bracket still in place.
View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
It's nice and casual.
It's nice and casual, the texture is okay. View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX250R, SUZUKI DL1000 V-STROM650, Others , DUCATI 1098, DUCATI 1198, DUCATI 748, DUCATI 749, DUCATI 848, DUCATI 916, DUCATI 996, DUCATI 998, DUCATI 999, DUCATI DIAVEL, DUCATI GT1000, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER S2R, DUCATI MONSTER S4R
good buy
The size fits perfectly and it's a good product. View detail
Fits: YAMAHA FZX250 ZEAL, YAMAHA XJR400DIVERSION, YAMAHA XT250X, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA TW225, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA SR500, YAMAHA SRV250, YAMAHA RZ-1, YAMAHA SR400, YAMAHA Renaissa, SUZUKI BANDIT400V, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI BANDIT400
Very good!
[How is it used?
I bought this because my 3 year old DAYTONA Motorcycle CoverSIMPLE LLSize (https://www.webike.net/sd/23823142/) had reached its limit. I was going to buy another DAYTONA, but it was late in coming in, I chose this one which was in stock.
Was the one you received as per Image?
It is thicker than I expected! It's a different level from the Covers under 5,000 yen. I didn't expect to receive a product of such a different level just by paying a little more.
How was your experience with it?
I bought the LL size after checking with the model that fits my VTR1000SP2, and it's just the right size for my VTR1000SP2. There is a rubber like Pants in the front and back, so you can adjust it to some extent.
[Included Parts:were they on?
It comes with a storage bag. But it is quite thick, so I think it would be quite impossible to store it in that bag… lol.
[Was there anything that disappointed you?
If it lasts more than 2 years, I won't say anything. The price is the price. I expect it to be durable to UV rays.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Motorcycle covers should be inexpensive, but it is a good idea to buy a new one from a well-known manufacturer in 2-3 year cycles. It doesn't matter what you use when you leave it outside.
View detail
I use it all the time.
I feel safe and always use them. View detail
Fits: DUCATI DESERTX, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 1100S, DUCATI HYPERMOTARD 1100EVO, DUCATI DIAVEL 1260S, DUCATI HYPERMOTARD 796, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD SP, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 950 RVE, DUCATI HYPERSTRADA 821, DUCATI HYPERSTRADA 939, DUCATI MONSTER 400, DUCATI MONSTER 620, DUCATI MONSTER 695, DUCATI MONSTER 1000, DUCATI MONSTER 696, DUCATI MONSTER 750
Custom in Red color Bartz
Black color body in Custom with Red color verts.
The number of small red-colored sections has increased again.
I was satisfied with the solid construction of the bars, the device was easy to use, and inexpensive as well.
Naturally, there is no change in driving.
View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Fits: YAMAHA FZX250 ZEAL, YAMAHA XJR400DIVERSION, YAMAHA XT250X, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA TW225, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA SR500, YAMAHA SRV250, YAMAHA RZ-1, YAMAHA SR400, YAMAHA Renaissa, SUZUKI BANDIT400V, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI BANDIT400
Thick fabric, heavy weight.
unicar unicar industries
Completely Waterproof Rain Protect Bike Cover
LLSizeSize:Overall length approx. 220×Overall height 135×Overall width 105×Tail width upper 28×Tail width lower 55×Tail height 95cmMaterial:PVC on frontPolyester 100% non-woven fabric on back
Purchased for YZF-R25.
It is a thick fabric and heavy.
Seams are seam stitched. There are holes on the front and back for a chain lock. There is no adjuster at the hem, but there is a rubberized hem at the front and back with a center belt.
View detail
OEM and Filter wrenchSize are different.
I used it on a DucatiMULTISTRADA 1000DS that I bought used.
We don't know when the Oil Filter was replaced, so we replaced the Oil Filter as well, just in case.
MULTISTRADA 1000DS is a so-called air-cooled DesmoEngine, so the same kind of engine has been used for a very long time.
I think all SS900, Monster series and even HYPERMOTARD1100 or so can be used together, maybe SCRAMBLER1100 too.
I honestly don't know about the functionality, I haven't felt any difference in filter performance, but I'm sure it will be large and sturdy since it is DAYTONA under the sun.
One point that is unexpected.
DAYTONA Oil Filter for Ducati is different from OEM Oil Filter in wrench size.
In other words, the filter wrench for OEM can remove the OEM Oil Filter, but cannot tighten the DAYTONA Oil Filter….
The Filter wrench that can be used for this Oil Filter appears to be FOR HARLEY.
Since I was in a hurry, I tightened the brown by hand with full power (I tightened it later with another Daytona Oil filter wrench).
View detail
Fits: DUCATI GT1000, DUCATI Sport1000, KAWASAKI H2, KAWASAKI H2R, KAWASAKI ZX-10R, KAWASAKI ZX-6R, SUZUKI GSXR1000, YAMAHA YZF-R1
Just fit
I installed it on the front fork protrusion (12mm) of Ducati 900SS. 17mm ball, so I matched it with KaEdia's AluminumHold modified KDR-M6S-1, and it was perfect. View detail
I knew it! Brembo!
The Pad that originally came with it was getting very thin, so we replaced it.
At first, I wondered if the stop was worse than before. I thought that it was worse than before, but I drove on.
After running for a while and some heat, it settled down to a smooth stop, just the way I like it.
KTM is a BYBRE Caliper, which means that the braking power is fine, but until now it has felt like it was working too hard for me with the kakkun.
If you are asking if brembo's Pad is unstoppable, rest assured that it is not at all.
The brake system is brembo after all.
View detail
Controlability
Before the replacement, there was rust on the surface (especially on the back side), and it did not work comfortably when I stepped on it, and there was a strange noise, but after the replacement, the noise disappeared and it works well and is easy to control. View detail
Fits: YAMAHA SRX600, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA TW225, YAMAHA TZR250R, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA XJR400R, YAMAHA XJR400 Diversion, YAMAHA XT250X, YAMAHA zeal, YAMAHA SRX400, KYMCO GRAND DINK 125Z, KYMCO GRAND DINK 150Z, PEUGEOT jet force, SUZUKI GSR400, SUZUKI GSX250S Katana, SUZUKI RG200 Gamma, SUZUKI RGV250 gamma, SUZUKI ST250
Cover for 250
I used the same one last time and repurchased. I felt the fabric was thinner than 2 years ago. Other than that, the size is perfect and I am satisfied. I think the cost performance is good. I think it might not last that long this time. View detail
safety
DUCATI SCRAMBLER2020 Rear Wheel Brake
The original pad is from bremboOEM, but we replaced it with this one.
When I first started using it, I was worried that it wouldn't work…? But as I let it sink in, it worked just as described. It works as long as you hold it/step on it." I feel that it is more Mild than OEM.
I think it is suitable for running like adjusting the speed with the rear brake while keeping the RPM low with a tight corner.
As for durability, I don't know since I've only just started using it.
View detail
Reasonable and easier to handle than OEM
I always use this product when changing oils and fats.
It has a Wrench-enabled head on the end, so it is easy to attach and detach, and despite the fact that it is almost functionally the same, the price is lower than OEM, so it is very useful.
The OEM was Stress because removal could not be done without destroying it, but after switching to this one, there is no extra process.
The Wiring hole is another thing I like about Race ish.
View detail
Fits: YAMAHA FZX250 ZEAL, YAMAHA XJR400DIVERSION, YAMAHA XT250X, YAMAHA TZR250RS, YAMAHA XJR400, YAMAHA TW225, YAMAHA tricker XG250, YAMAHA TW200, YAMAHA SRX250, YAMAHA SRX400, YAMAHA SRX600, YAMAHA SR500, YAMAHA SRV250, YAMAHA RZ-1, YAMAHA SR400, YAMAHA Renaissa, SUZUKI BANDIT400V, SUZUKI VANVAN200, SUZUKI BANDIT250, SUZUKI BANDIT400
OK in LL even with Pannier case
[How is it used?
Used with BMW R100 Pannier case.
The length is 224 cm on the vehicle inspection certificate, but SizeLL could cover up to the TireLimit.
Was the one you received as per Image?
I purchased this product based on the Review that it was heavy. It is heavy enough not to be blown away by the wind and gives me a sense of security. I think it is about 2mm thick, but I feel secure that it won't tear.
How was your experience with it?
When applying and taking off the cover, it is rough, so it may take some getting used to. The inside of the cover has a raised texture to prevent the wounds from sticking to the car body, so it is safe.
It seems to repel water well even on rainy days.
[Points to note]
If the waterproof part on the surface comes in contact with the exhaust pipe, it will melt. However, the inner material does not seem to be a meltable material, so it was not so bad that it made a hole even if the exhaust pipe made contact with it.
View detail
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Natural Suite
Rear Brake Disc Rotor of TRX850 was replaced with MADE IN SUNSTAR.
Since the Front Brake Disc Rotor was replaced, the Rear was also MADE IN SUNSTAR.
High safety, optimal tolerance design, limits and challenges are the company's design philosophy.
I sympathized with the emphasis on functionality over design.
The quality of the product is perfect and full of rigidity.
The initial touch with Brake Pads is also natural, and has a nice, natural feel without being abrupt.
I don't know how to describe it, but it's seamless.
Next time I replace the brake disc rotor, I would like to use MADE IN SUNSTAR.
View detail
Easy to install, recommended for beginners
It could be used in the same way as OEM Product.
The product is highly accurate and there were no oil leaks, etc.
Brand-wise, I trust and recommend it.
View detail