Reviews
Fits: HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB 110, HONDA SUPER CUB 110 PRO, HONDA SUPER CUB 110 60th Anniversary/STREET, HONDA SUPER CUB110 MD (Postal Service)
OEM equivalent? Is the price lower than OEM?
After running about 13,000Km, the fuel consumption was over 70Km/L for long distance driving, but it dropped to about 65Km/L, so I replaced BigThrottle + Fuel Booster cable and Plug.
Well, I wonder if it is as good as OEM, I don't know the effect of Single Item, but it recovered over 70Km/L.
Since it is not such an expensive part, I am planning to replace it every 10,000 km from now on.
View detail
Fits: HONDA CD50, HONDA BENLY CL50 (BENLY50), HONDA Broad (BROAD), HONDA CBX125F, HONDA CBX125F, HONDA CBX125C, HONDA CBX125C, HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA CBX125C, HONDA CBX125C, HONDA Broad 90 (BROAD), HONDA CABINA (CABINA), HONDA CABINA 90 (CABINA), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA Ape (50)(APE), HONDA TACT Basic SPECIAL Knife, HONDA TACT Basic
Replace the old one
I think it is good for city driving, it is enough for slow driving, just my personal opinion. View detail
Fits: HONDA SUPER CUB 50, HONDA AA04-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
They didn't have 37 guns, so I bought 35.
I put it on my CUB, which is good because I wanted more AA01 top speed! View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50 PRO, HONDA SUPER CUB 50 PRO, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX150, HONDA ADV150, HONDA LEAD 125, HONDA LEAD 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA MONKEY 125, HONDA SUPER CUB C125, HONDA SUPER CUB C125, HONDA glom, HONDA glom, HONDA glom, HONDA glom, HONDA SH MODE
Good!
[How is it used?
No leakage of waste gas
How was your experience with it?
No problems
How did it compare to other products?
Good cosmetics in a pack of 2
[Points to note]
None
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
COSPA ◎
[How is it used?
The OEM GEAR ratio of the CUB is quite short, so I bought it to change the GEAR ratio. 1 speed of the CUB is so short that I wondered where I would use it, so I chose the largest size that would fit in the Engine.
Was the one you received as per Image?
As per Image
I always use KITACO's Sprocket for 4MINI systems because of its good cost performance.
Was the installation difficult?
Since there are 16 chains, the Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) must be installed at the same time.
How was your experience with it?
It is now much easier to drive. Also, since the RPMs were lowered when cruising, fuel consumption was also increased. Two birds with one stone.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Wide Chain Guide Plate (https://www.webike.net/sd/23863487/) is required to protect Crankcase and should be purchased at the same time.
View detail
Fits: HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB 50
Protection.
[How is it used?
Drive Sprocket (Front) (https://www.webike.net/sd/370566/), as it seems to be mandatory to purchase them at the same time in order to install 16 of them.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Simply remove the original attached OEM and replace it.
How was your experience with it?
There is a sense that Crankcase is protected. I don't feel it particularly.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail
Fits: HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB110PRO
JA59. Quite an impression change.
[How is it used?
CUB Dress-up
Was the one you received as per Image?
Image Street
Was the installation difficult?
One Phillips Screwdriver is all you need
How was your experience with it?
The CUB has been tightened up, looking better while retaining the Retro feel of the CUB.
[Included Parts:were they on?
Lens and Valve only. Instruction Manual was a type that reads QR.
[Was there anything that disappointed you?
nothing special
Lens. [Color] If you want to use Smoke, Valve's Amber with Color is about 1,400 yen cheaper than Plating, and the orange color that is faintly visible is cool. Installation takes about 10 minutes. For both the rear and front blinkers, remove the bottom screw and turn the coupler to the Left to remove the Lens, and the ball can also be removed by lightly pushing it in and turning it to the Left. Installation is the reverse procedure.
The Smoked lens on the Tail is from KITACO (about 2600 yen on amazon).
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
For peace of mind
I installed it on a Spur CUB110. Instruction Manual was included after installation, but
There is no Instruction Manual on how to wire. I had a little trouble, but I was able to install it.
I think you should take it easy and let Shop handle it.
Attachment is required for installation.
It is easy to use, just turn off the key and it will beep one minute later! A minute later, it will beep!
With the key ON
Release. I think it's safe to leave Motorcycle for a bit.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Grom jc92
I have increased one finger to 16T. I have not ridden a long distance yet, but on a flat road, I can ride as well as I did with the 15T. I don't feel any lack of Torque at the start.
I have not yet put on the Pulse speed converter, but the Meter reading has a very Large error.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA Cub Pro110, HONDA Cub Pro50
Just right with moderate quality.
Carrier originally had Bamboo Kawa Plating for CUB, so I put it on, but I thought Black would look good on JA45 Green Light, so I bought it. It was not so luxurious, but matched with the cool feeling of CROSS, which was what I was aiming for. The price is about half of the manufacturer's product, and I can now put thin luggage in it. The only thing I regret a little is that the body is painted black, but the included screws are silver. I read this imprement before I bought it, and it said that the CUB needed to be modified, but the CROSS was large and sturdy. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA XR100MOTARD
cheap
It's cheap
The JC92 is a 5-speed Mission, but honestly I have no use for 1st gear,
So I decided to use the first gear by setting the Front to 17.
The replacement itself is easy, but please note that the Cover will not be attached unless the bracket of the Sprocket Cover is modified or replaced with another brand product.
It may be the first thing you change when you buy a new car.
View detail
Fits: HONDA SUPER CUB 50, HONDA AA04-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125
It's easy.
I use it in Circuit, it's easy! View detail
Fits: HONDA Dunk, HONDA Sh mode, HONDA Giorno, HONDA BENLY50, HONDA CROSS CUB, HONDA BENLY50110, HONDA DIO110, HONDA glom, HONDA FORZASi, YAMAHA VOX, YAMAHA VOXDELUXE, YAMAHA VOXLIMITED, YAMAHA GEAR, YAMAHA NEWS GEAR, YAMAHA VINO, YAMAHA VINODX, YAMAHA VINOMolar feh, YAMAHA SDR, YAMAHA MAJESTY, YAMAHA MAJESTYC
Bright!
I bought a used VINODELUXE Valve because it was out of stock, so I looked for it and found it.
It is not made in China, which I have never heard of, and which I sometimes see on Amazon and other places. The brightness is nothing compared to the Normal valve. It is bright! It is enough for the speed range of a moped.
It may be a problem on the vehicle side, but switching from Low to High is smooth, but conversely, when changing from High to Low, I feel that it changes with a slight one-tempo13 delay.
View detail
Fits: HONDA PCX, SUZUKI Zixer 250, SUZUKI Zixer 150, SUZUKI SWISH, SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX, YAMAHA MT-25, YAMAHA MT-03, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel l 1100DCT, HONDA Rebel 1100, HONDA Monkey 125, HONDA hunter turnip, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110
The construction is solid.
I used Knuckle guard of KITACO and Mukawa in the past, but this Knuckle guard has thickness of Acrylic and Bracket.
They were all thick and Well.
After installation, there was no distortion or shaking when driving.
I used it with DAYTONA's WindowShield, but the screw holes in the bracket were a little small and the bolt did not fit through, so I had to drill to slightly increase the size of the bolt.
Drill when used with the same DAYTONAWindowShield.
View detail
Fits: HONDA PCX, SUZUKI Zixer 250, SUZUKI Zixer 150, SUZUKI SWISH, SUZUKI GSX-S125, SUZUKI GSX-S125, YAMAHA NMAX155, YAMAHA NMAX, YAMAHA NMAX, YAMAHA MT-25, YAMAHA MT-03, HONDA Rebel 250, HONDA Rebel 250, HONDA Rebel l 1100DCT, HONDA Rebel 1100, HONDA Monkey 125, HONDA hunter turnip, HONDA Super Cub 110 Pro, HONDA Super Cub 110 Pro, HONDA Super Cub 110
In some cases, there may be processing?
I put it on my CROSS CUB110.
Since I had a Screen and Front basket attached, I thought there might be some interference, but I was able to install it without any interference.
However, the bracket screw holes were too small for the DAYTONA window screen, so I used a drill to increase the size of the holes to make them larger.
Acrylic and Bracket were thick and firm, though, [Color] Black Painting was better in my opinion than Bracket of Plating Process on Acrylic of Smoke.
Guard." Although it has the name of "wind protection", it does not have the protection of a hand guard or knuckle guard like those attached to off-road vehicles, and should be considered as wind protection items.
However, when driving on a moped within the legal speed limit on ordinary roads, I could not see any wind protection effect, but it looks better, so I give it a ◎.
View detail
Fits: HONDA glom, HONDA DAX125, HONDA MONKEY125, HONDA CT125CT110 HUNTER CUB, HONDA CROSSCUB110, HONDA SUPER CUB110-PRO, HONDA SUPER CUB110
Larger Pitch Front Sprocket was needed for the 181cc BBK on the Monkey
About quality and texture: I am happy with the quality of the front sprocket from Kitaco. The 16 tooth 428 pitch front sprocket is manufactured from high carbon steel with lightning holes. About the feeling of use: The main reason I removed the OEM Honda front sprocket was to increase the size of the front sprocket to help lower the RPM of the 181cc BBK when crusing at high speed and allow for the fitment of a thicker stronger chain. Products to buy together: A larger sprocket guard plate would also be desirable to purchase alongside the front sprocket for additional clearance when using a larger front sprocket. Difficulty of installation: The process to install takes about 15 minutes. Remove the sprocket cover and back off the chain tension. Remove the two bolts that hold the locking plate and then remove the sprocket. Install the new sprocket, secure the locking plate and make a chain adjustment. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a front sprocket made from a durable material and designed with the best performance in mind at a great price as compared to the basic styled front sprockets from the other bands and non as cheap in the 16 tooth size. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: If you wish to swap front sprockets for a change in tooth size then inspect your current driven sprocket and drive chain to see if they will be suitable to use with your new front sprocket and if not then purchase all three parts together. View detail
Fits: HONDA BENLY CL50 (BENLY50), HONDA SUPER CUB 110 MD (SUPER CUB Postal Service), HONDA SUPER CUB 110 PRO (SUPER CUBPRO), YAMAHA NEWS Mate 90
For YSR80 ForkOH.
Used for Front forkOverhaul on YAMAHA YSR80.
Compared to OEM Product, the price is much more reasonable but no different.
Dust seals are inevitably OEM, but thanks to this product, we were able to overhaul them at a much lower cost and are very happy with the results.
View detail
Fits: HONDA CT110 HUNTER CUB125, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA PCX 125, HONDA PCX 160, SUZUKI ADDRESS110, SUZUKI Address125, YAMAHA AxisZ, YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus, YAMAHA NMAX125, YAMAHA NMAX155
CT125 would still be better with a dedicated Size
Purchased ahead of time with the intention of equipping Tandem seat + Box
I have the dedicated Size one, but it's still as easy to hang, the ears can be dried on the hook, and the feel of the inside is just as good as ever.
The special size was Exactly for the tire and ground surface, but this size makes it feel a little buggy.
On the other hand, there is plenty of room in a Large tight box, so it's no wonder they make it in mediocre.
The performance seems to be good. No stain even in heavy rain, no rust in the exhaust system, and I am satisfied.
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100 TypeD
I raised it from 12T to 13T and 13T to 14T.
I went from 12T to 13Th to lower the Engine RPM when driving. I went from 13T to 14T to lower the RPM a little more. Now I can cruise 60km before the engine roars even on a moped. Of course, it is only a moped when going uphill.
When I bought it, I noticed that the Washer shape is different between Takegawa and Tokico (the position of the Bolt hole and the notch to enter the Spline are reversed), so it cannot be fastened without using the Washer included in the package.
View detail
Fits: YAMAHA Vino, YAMAHA Vino, YAMAHA JOG, YAMAHA JOG, SUZUKI XCH50, HONDA XR125LK, HONDA XR125LEK, HONDA XR125L, HONDA XR125, HONDA XL125, HONDA XL125, HONDA Today, HONDA Today, HONDA Today F, HONDA Tact, HONDA Tact, HONDA Tact Basic, HONDA Tact Basic, HONDA Super Cub50 Pro, HONDA Super Cub50 Pro
usually
I don't know about durability yet, but from the initial feeling, I think it is usually good.
Perhaps asking for more would not make much difference.
View detail