Reviews
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
High sense of security
The fabric is firm and sturdy, so you don't have to worry even in Large rain. The weight is not as heavy as I thought it would be, but rather it is a good weight that is not likely to be easily blown away by the wind. View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
I wonder if the hardness will engulf the sand.
Since it is thick and not flexible, sand etc. will be caught by the wind from under the Seat and will dance inside the Seat when it is near a field, etc. It prevents rain, but when the wind blows, rain will naturally enter from underneath and dance inside the thick Covers. It prevents rain, but when the wind blows, rain naturally enters from below and dances inside the thick cover, making it quite damp. When the sun shines, it is necessary to remove the Seat to dry the Motorcycle. I wish I could use several of them. View detail
Worth replacing, but a little Delicate (laughs)
Iridium plugs are good! So I decided to give them a try.
I also wondered if I should replace the Plug since I changed it last time and it had 10,000 km on it.
I still think it's a good idea, but I've had the following experiences (laughs).
[I have to replace it.
As performance declines, power down and fuel consumption deteriorates, causing the engine to fail to deliver the performance required of it. 。
Idling malfunction, breathing under acceleration, etc...quite severe malfunction symptoms.
I→ll have to replace it (laughs).
I think there are many people who don't know what is a normal plug, a spark plug, and an iridium plug.
[Spark plug → OEM Plug thing.
The structure of the Spark plug is to promote the ignition of the air mixture by discharging between electrodes.
[Iridium plugs]
Iridium plugs have a narrower tip to prevent sparks from scattering. 。 With ordinary plugs, the discharge is scattered and the center and outer electrodes prevent the growth of flame nuclei, but Iridium plugs suppress such phenomena. In addition, these types use low-wear Windshield IRIDIUM or WhiteGold electrodes, so they do not need to be replaced for up to approximately *100,000 km.
Motorcycles have a higher RPM than cars, so the replacement frequency will be much shorter.
Iridium plugs are a good thing, but Merit and Demerit are not.
[Merit]
◎High ignition performance.
◎Engine performance is drawn out.
◎Plug durability is high.
◎Improvement of fuel economy performance.
◎Smoldering-resistant.
[Demerit]
?High price compared to common Spark plugs, WhiteGoldPlug, etc. →About 3 times the price of Spark plug.
?Maintainability. If the electrode is wet or has a lot of soot (e.g., Carbon) on it, it will need to be cleaned to maintain performance.
?Fuel conditioning may be required.
After about 1,000 kilometers of driving.
Startability has improved. Before, it took 2 or 3 KICKs, but now it's almost always the first one.
Large sturdy, especially when Chalk is pulled and fuel is thickened.
Torque at low to medium speeds is going up.
Even in 5th gear, it now sticks from low rpms. I don't recommend it because it→Knocking (laughs).
It seems that no specific carburetor setting is required.
It seems to be worth the high price.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Recommendation can be made to all Yuetc. Motorcycle Cover
First of all, this Motorcycle Cover "buy" It is! Attraction Point1 A good looking, unique camouflage pattern." Attractiveness Point2 The Key for Hole's 40mm Eyelet. (Large and convenient) Attractiveness Point3 Red LoopTape on Front section. (It's very useful!) It doesn't have great rainproof performance, but it's affordable, easy to use, and the camouflage pattern is cool! It is very useful in the parking lot of the apartment because I can easily recognize my motorcycle with the camouflage pattern! View detail
Very happy
Was skeptical at first, but gave it a shot. Ordered 1 to ship to Oklahoma. Received item in a timely matter and it's what I wanted. Will be ordering from them again. Thank you View detail
Fits: BMW R 100R, BMW R 80R, BMW R 80GS PD, BMW R 100GS PD, BMW R 100GS, BMW R 65GS, BMW Paralever Modelle R 80GS, BMW R 80GS Basic Monolever Modelle R 65, BMW R 75/7, BMW R 60/7, BMW R 80ST, BMW R 65, BMW R 65LS, BMW R 80G/S, BMW R 45, BMW R 100CS, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6
To prevent oil leakage! After installing the new Gasket, the oil leak was completely cured.
[How is it used?
Can be used with BMW R100 series. It should work with most 2V OHVs of this generation.
How was your experience with it?
The hard material can be tightened with a screw to firmly seal without oil leakage.
View detail
Fits: BMW R 75/7, BMW R 60T, BMW R 60/7, BMW R 90S, BMW R 90/6, BMW R 75/6, BMW R 60/6, BMW R 100RT till 1990, BMW R 100S, BMW R 100CS, BMW R 100T, BMW R 100, BMW R 100/7, BMW R 80TS, BMW R 80TN, BMW R 80RT, BMW R 80N, BMW R 80/7S, BMW R 80, BMW R 80/7N
If it deteriorates, replace it!
[How is it used?
Used on BMW R100 Twin suspension.
How was your experience with it?
The rubber had deteriorated considerably and was falling apart, so we replaced it. The new rubber was taut and of reliable quality.
[Points to note]
If you can buy both, purchase quantity 2!
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA virago, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA YZF750SP, YAMAHA XJR1300, YAMAHA XV250, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZX750, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750, YAMAHA FZR1000
Motorcycle Cover After 3 months of use.
[How is it used?
Used in a parking lot with a carport. Where rain does not hit directly.
Was the one you received as per Image?
Camouflage pattern, as per Image. I prefer this area.
Was the installation difficult?
The size is a little large.
I'm satisfied with it because it just covers me completely.
How was your experience with it?
Use it for 3 months.
(1) Camouflage patterns can be quite recommendation in terms of security since they blend in at night.
A color that can recommendation in terms of security. This was a pleasant miscalculation.
I don't know about the durability of the PelePera fabric, but if it is not exposed to direct rain and can be stored indoors, it seems to be reasonably durable.
At any rate, I've been using it for 3 months with no problems at all. I just think it would not be suitable for places with Blue empty parking. Especially the fabric is so thin that I think the Cover will tear in windy areas.
[Included Parts:were they on?
[Was there anything that disappointed you?
My concern is the Buckle, if it breaks I won't be able to tie the Motorcycle down and it will probably crack over time after a few years. I'll see how it goes.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
Heavy, but sturdy and waterproof seems perfect
The first impression is "heavy" It was. But I would describe it differently:sturdy, thick fabric, waterproof, and perfect as claimed.
However, I just bought it, so I can't say for sure, but it will probably be Large sturdy.
Due to the weight and the thickness of the fabric, it takes a little time to put it on the motorcycle, but that is understandable because it is solid.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-8R, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750R, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA YZF750SP, YAMAHA XV250, MOTOGUZZI Le Mans 1000, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FJ1200A, YAMAHA V MAX 1200, YAMAHA FZR400RR
Not bad, but …
I bought this as a cover for my Ducati Deer Bell v4, and although the size is exact, it is hard to tell the front from the back, and the SeatBack is wet, so I think the waterproof property is not so good. View detail
Fits: KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, BMW G650 Crossmoto, BMW K-1 (Japanese kick-boxing promotion), BMW K1100SR, BMW K1300R, BMW K1300S, BMW K75, BMW R1200R, BMW R80, BMW S1000RR, DUCATI 1000, DUCATI 800, DUCATI 999S, DUCATI 999SS, DUCATI Monster1000, DUCATI Monster1100, DUCATI Monster1100S, DUCATI Monster800
I bought a new one.
Used outdoors.
I had to replace my previous Cover because the surface had deteriorated and torn.
Was the one you received as per Image?
The color might be a little different from the image on the Page.
The fabric was thinner than I had imagined.
How was your experience with it?
No complaints so far, neither possible nor impossible.
[Points to note]
I would like to focus on the Waterproof effect.
How did it compare to other products?
We would like to evaluate the cosmetics as we use them in the future,
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, YAMAHA VIRAGO, YAMAHA YZF750SP, YAMAHA XV250, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1200R, YAMAHA XJR1300, YAMAHA FZX750, YAMAHA V MAX 1200, YAMAHA XJ600S, YAMAHA FZR600, YAMAHA FZR750, YAMAHA FZR1000, YAMAHA FZR250R, YAMAHA FZR400RR, YAMAHA FJR1300, YAMAHA FZ750
Used for ZrX1200DAEG.
I bought a Cover to put on my ZrX1200DAEG.
First impression is that Size is huge.
View detail
Fits: Others SPARTACO, MOTOGUZZI 1100SPORT・Carburetor, BMW R100R, YAMAHA XS400SP, YAMAHA XV535/S, YAMAHA XS1100, YAMAHA TY250ZTY250, YAMAHA TY350R, YAMAHA SR400 LIMITED EDITION, YAMAHA SR400, MOTOGUZZI Norge 1200GT, YAMAHA TY250Z, YAMAHA SR500, YAMAHA SR500, MOTOGUZZI Quota 1100ES, MOTOGUZZI GRISO1100, YAMAHA SR400, MOTOGUZZI California・Special sports, MOTOGUZZI BREVA1100, MOTOGUZZI California・Stone touring
Expected durability
I am a SR400FI user. In Korea, Denso's iridium plugs are famous and used a lot, but I personally like NGK, a genuine manufacturer, so I purchased NGK iridium plugs. Since only genuine spark plugs have been used, Iridium's durability and performance are expected. -------------------------------------------------- -------- SR400FI user. In Korea, Denso's Iridium Plug is famous and used a lot, but I personally purchased NGK Iridium Plug because I like NGK, a genuine manufacturer. Only genuine ignition plugs have been used, so Iridium's durability and performance are expected. Powered by Google Translator View detail
Fits: MOTOGUZZI NORGE 1200GT, MOTOGUZZI 1200 SPORT, MOTOGUZZI GRISO 1100, MOTOGUZZI BREVA 1100, MOTOGUZZI GRISO850, Others GHEZZI&BRIAN SUPERTWIN1100, Others GHEZZI&BRIAN FURIA, Others G G SPARTACO, YAMAHA XV535DX VIRAGO(Reimport), YAMAHA XV535/S, YAMAHA XS400SP, YAMAHA TY350R, YAMAHA TY250Z, YAMAHA TY250Z SCOTTISH, YAMAHA TY250R, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR400S LIMITED EDITION, YAMAHA NEWSMATEV50BUSINESSII
Recommendation for first-time maintenance
I have a feeling that the vibration is somewhat Mild, but
The change is quite small.
Single cylinder Motorcycle is easy and nice because it only needs 1 pc.
The work can be done using only on-board tools, and it is inexpensive and time-saving.
This is the first maintenance and recommendation.
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI ZRX1200 DAEG, KAWASAKI ZX-8R, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZXR750R, YAMAHA XV400, YAMAHA YZF-R1, YAMAHA XJR1300, YAMAHA YZF750SP, YAMAHA XV250, MOTOGUZZI Le Mans 1000, YAMAHA XJ600S, YAMAHA XJR1200R, YAMAHA FJ1200A, YAMAHA V MAX 1200, YAMAHA FZR400RR
Regular Body Cover
Is it easier than buying at Motorcycle supply stores?
Regular Body Cover
View detail
Fits: KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, BMW G650 Crossmoto, BMW K-1 (Japanese kick-boxing promotion), BMW K1100SR, BMW K1300R, BMW K1300S, BMW K75, BMW R1200R, BMW R80, BMW S1000RR, DUCATI 1000, DUCATI 800, DUCATI 999S, DUCATI 999SS, DUCATI Monster1000, DUCATI Monster1100, DUCATI Monster1100S, DUCATI Monster800
There's some kind of seepage...
Used for outdoor storage.
When I removed the Cover and checked the Motorcycle after it rained, there was some White Stain on it...
Apparently, every time it gets wet, this Cover's Waterproof (Fire protection?) The ingredients seem to be seeping out.
Fortunately, the stain is easily removed with water, but it is too much of a hassle to have to wipe it off each time, so I would not repurchase.
Also, it is pretty peLePera and has a lot of room in the Size, so it flops around a lot when a strong wind blows.
View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
It was scrap iron.
The BMW OEM drain plugs screwed right into the new oil pan without any pain to the female screws.
The Oil Drain Plug of SIEBENROCK does not function as a Screw because the Screw threads near the tip of the Screw have become dull.
Material with iron Drain plug:It is Garbage that exists to destroy Aluminum's Oil pan.
The magnet that comes with the Drain plug is also weak and does not have the necessary capacity.
There was no M18P1.5 dice, so I installed a screw cutting byte on the lathe and modified the tip of the screw section. The tip can be screwed in, but the turning force becomes heavy from the middle of the screw and the accuracy of the screw pitch seems poor.
I am not considering returning it because I post-processed it to make my own modifications to the product, but it was Garbage that had to be thrown away.
View detail
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Fits: BMW K 1200GT, BMW K 1200LT, BMW K 1200RS, BMW K 1100LT, BMW K 1100RS, BMW K 100RS4V, BMW K1, BMW K 100LT, BMW K 100RT, BMW K 100/2, BMW K 100RS, BMW K 100, BMW K 75S, BMW K 75RT, BMW K 75C, BMW K 75/2, BMW R 100RMystic R8 0GS Basic Paralever K 75, BMW R 80R Mystic R 100R, BMW R 80R, BMW R 80GS PD
Not compatible with K1200RSFirst Model Type.
Not compatible with K1200RSFirst Model Type (1998). View detail
Fits: BMW R80 RT, BMW R80 R ROADSTER, BMW R80 GS PARIS DAKAR, BMW R1100RS, BMW R100 RT, BMW R100 R ROADSTER, BMW R100 GS, BMW R100 GS MYSTIC, BMW K75RT, BMW K75, BMW K1
Amateurs should not touch it.
No instruction manual of any kind was provided, although I had checked in advance.
Inside the package was only the disc, collar, bolt nut, and Sticker. There was supposed to be a washer under the collar, but it was not included. (Without Washer, the color height was not high enough; I added Universal's Washer and got it just right.)
The installation requires a rather Hurdle work for an amateur to separate the Inner and Outer of the STD Disc by flying the Crimp part of the Rivet with a Grinder and punching it out with a Punch.
Since the torque of nut tightening is also unknown, we can only make an analogy from the size of bolt nut.
The lock nut is made of Nylon, so I do not think it will loosen easily, but I am a little concerned because of its location.
The Disc Plate and color crafting system and quality itself are of high quality as far as I can see.
The product seems to be basically a product that is supposed to be worked on by PROs, although the essential parts of the product seem to be OK since it goes through the TUV standard of Germany.
View detail