Reviews
![Breathable Waterproof Cover Ver2 [LL]](https://img.webike-cdn.net/catalogue/images/46183/image_01_TS.jpg)
Fits: APRILIA SL750750, BMW F800 R, BMW F800 S, BMW K1300 R, BMW K1300 S, BMW R nineT, BMW R100, BMW R1100, BMW R1150 R, BMW R1200 R, BMW R1200 RS, BMW S1000 R, BMW S1000 RR, DUCATI Clampura-Icon, DUCATI MULTISTRADA 1000DS 1200, DUCATI Monster series, HONDA 400 X, HONDA CB1100, HONDA CB1100 EX, HONDA CB1300 SF
high quality
Motorcycle Cover is hung in two layers. This product is used on the inside because it seems to be a fabric that will not Wound the vehicle body. It seems to rub in high winds, which may affect the paint somewhat.
When I used Single Body before, bird droppings were difficult to remove because they got into the gaps between the fabrics.
I replace them when they start to powder. This time, the Large seems to be durable even after 2 years. The included Mirror cover is a good protection against powder.
The anti-slap strap tends to get caught in the gap between the brake pedal and the pedal, so depending on the car model, it may be better to be careful when removing it.
View detail
![Motorcycle Cover KIZUNA [Road Sport (with Cowling) 400-1400cc]](https://img.webike-cdn.net/catalogue/images/43748/kizuna_01_TS.jpg)
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used on the outside Cover
The Motorcycle Cover is used in two layers and is used on the outside.
It is water-repellent and waterproof, so even bird droppings and pollen can be washed off.
I am not concerned about the flapping that other users have pointed out, as it seems to be sized just right by the Cover used inside.
It is durable enough to be replaced in two years.
View detail
Safe and reliable DAYTONA products
I used it to replace oil in my S1000RR.
The number of washers required for one oil change is one, so you do not need three washers, but you should save them for the next oil change.
There was no rough workmanship, and it was installed cleanly.
If you are in doubt, choose this one because it is made by DAYTONA, a Large hand.
However, the diameter of the drain bolt differs depending on the vehicle, so be careful to select the right fit when purchasing.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Easy-to-use Motorcycle Cover
It is smooth and easy to use. It is just a little disappointing that there is no aperture so it is easy to get wound up. I think Y's Gear might be better in that area. View detail
![TAKUMI Motorcycle Cover Ver.2 [LH]](https://img.webike-cdn.net/catalogue/images/21036/photo1_TS.jpg)
Fits: KAWASAKI W800street, YAMAHA DT230 LANZA, YAMAHA SEROW250, YAMAHA BRONCO, YAMAHA SEROW225 W, YAMAHA XT660X, YAMAHA YZF-R3, YAMAHA XT660R, YAMAHA XSR700, YAMAHA XSR900, YAMAHA XJR1300, YAMAHA X-MAX, YAMAHA XJR1200, YAMAHA WR250X, YAMAHA WR250R, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA MT-10, YAMAHA SCR950, YAMAHA MT-09SP
For my first Large Motorcycle.
[How is it used?
In use on MT-09
Was the one you received as per Image?
It was larger than I expected in its folded state.
How was your experience with it?
It has a front and back drawstring, so you can squeeze whichever way you want in the front.
It is also good that there is a Surface Fastener to stop the string after squeezing so that it does not touch the ground.
Attention to detail.
[Points to note]
It comes with a bag for storage, but once removed from the bag, it can never be put back in the same condition again.
I don't think it makes much sense since it is not a portable Size.
View detail
Easylock BF11
I think the price is too high, even if it is unavoidable due to the model-specific nature of the product. View detail
Fits: BMW S1000 XR, BMW S1000 XR, BMW R850RT WITH INTEGRAL, BMW R850RT, BMW R850R, BMW R850R, BMW R850GS, BMW R850C, BMW R1200R, BMW R1200GS TRIPLE BLACK, BMW R1200GS, BMW R1200C, BMW R1200 ST, BMW R1200 S, BMW R1200 RT, BMW R1200 HP2 MEGAMOTO, BMW R1150RT WITH INTEGRAL, BMW R1150RS, BMW R1150R ROCKSTER, BMW R1150R
About the use of SBS 742HF
The main use of the motorcycle is for touring. I used to use OEM Product Brake Pads, but I decided to use SBS Brake Pads on the recommendation of my Motorcycle shop. The feeling is normal and I have no complaints, but the most important thing to mention is the durability. 742HF has about 2 to 3mm of remaining after 20,000km, which is more than enough to replace the OEM product after 15,000km. Last year, I made a round-the-Japan trip, which is my long-cherished dream, and I purchased the 742HF for the replacement this time, but even after running 25,000km, I was able to confirm that 2mm remained. I think it is an excellent pad for those who value cost performance. View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Pretty good
It is not too flimsy and seems to be reasonably durable.
There are holes in the front and back for a chain lock and a belt stopper underneath,
I think the cospa is one of the better ones.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Slightly Larger
I bought this product because the Motorcycle Cover I bought at 2 Rinkan had a small hole in it due to deterioration within a year. It is completely outdoors without a roof. The environment is harsh because it is exposed to the wind.
I put this product on xr as it is, but it is a little Large size. It is a little too large. The total length is 220, so it is between L and LL.
The flapping and scratching were a concern, so I doubled up the Motorcycle Cover I had been using and put it on the bottom, which made things a little better.
The quality and functionality are good, and the price is reasonable, so if it lasts a year, it's good enough.
View detail
![MCP High Spec Bike Cover《Bike Guard》 [LL]](https://img.webike-cdn.net/catalogue/images/43895/MBC005_01_TS.jpg)
Fits: BMW K1300 S, BMW F800 S, BMW K1300 R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R250, YAMAHA YZF-R3, YAMAHA YZF-R6, HONDA CBR650 F, HONDA CTX700, HONDA CTX700 N, HONDA NC700 S, HONDA NC700 X, HONDA NC750 X, HONDA NC750 S, HONDA PS250, HONDA VARADERO 125, HONDA VFR1200 F
MCP High Spec Bike Cover "Bike Guard" LL
MCP High Spec Bike Cover "Bike Guard" LL I bought this to prevent the pranks, and when I didn't put the Cover on, I was quite annoyed. View detail
![PIN SYSTEM SHAD Product Number [X0SE04P/X0SE10P/X0SE16P] Exclusive Fitting](https://img.webike-cdn.net/catalogue/images/48356/13936747_1_TS.jpg)
Fits: BMW R1200 RS, BMW S1000XR, BMW R1150RT (02-04), BMW R1150RT, BMW R1200 15-18, BMW R1200 R 15-18, BMW R1200GS ADVENTURE, BMW K1200R (05-08), BMW K1200RS (00-04), BMW K1200S (05-08), BMW K1300 R 09-18, BMW K1300 S 09-18, BMW R1200GS, BMW R1150R (01-06)
The picture is different.
I wanted to purchase this bag at the same time as the SHAD bag, but was hesitant to purchase it because the picture on the site was different from what I had researched, so I purchased it at another store. The part number of the item I received was the same as the webike part number.
R1250RS was just a Type to replace 4 Bolt of Fuel tank cap with Pin. if you can understand Double nut, you can easily work with 2 M5 Nut.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
It is a little Large size.
It's a Large tightening for the Ninja 400cc. View detail
Fits: BMW S 1000 XR, BMW S 1000 RR, BMW S 1000 R, BMW R nineT Scrambler, BMW R nine T Urban GS, BMW R nine T Urban G, BMW R nine T Racer, BMW R nine T Pure, BMW R NINE T, BMW R 900 RT, BMW R 850 RT, BMW R 850 RT, BMW R 850 R, BMW R 850 R, BMW R 850 GS, BMW R 850 C, BMW R 1200 ST, BMW R 1200 S, BMW R 1200 RT, BMW R 1200 R
R nine T Drain bolt
It's a nice, neatly made product with a good texture.
I bought it to run Circuit occasionally and to do wire lock.
View detail
Fits: BMW K100, BMW K1, BMW K1100, BMW K1200, BMW K75, BMW R1100, BMW R1200 all, BMW R1150, BMW R850, MOTOGUZZI V11, APRILIA SMV750 DORSODURO, BMW F650GS, BMW F800, BMW S1000RR, APRILIA MANA850 , APRILIA SL750, BMW HP2, BUELL LIGHTNING X1, BUELL CYCLONE M2, BUELL THUNDERBOLT Shoulder Bag S3
Used for 4-wheeled vehicles
Used on a Toyota AE86.
The filtration performance will probably be reduced, but the hydraulic pressure will be stabilized.
Since it is with Magnet, it can be expected to collect iron dust.
Of course, there were no oil leaks and the fuel consumption was slightly better.
The running cost is also high, considering the cost of parts cleaning and packing when replacing the body, as well as the price of the body.
View detail
Fits: SUZUKI SV650, YAMAHA Dragster 400 Classic, YAMAHA Dragster 1100 Classic, YAMAHA warrior, YAMAHA Dragster 250, KAWASAKI Z1000, KAWASAKI ZR-7/S, KAWASAKI ZRX1200, KAWASAKI ZRX400, KAWASAKI Eliminator 125, KAWASAKI Eliminator 250, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Vulcan 1500, KAWASAKI Vulcan 400, KAWASAKI Vulcan 800, MV AGUSTA F4-BRUTALE, SUZUKI gsx1100s katana (sword), SUZUKI GSX1400
Seam allowance is not handled.
The soft Silk-like fabric doesn't seem to scratch.
I use it on my MT09 and it covers about 80% of the side cowl, which is enough.
The storage bag is also easy to use.
The problem is the seam allowance on the back. They tend to fray easily, and a bunch of fine lint gets on the Motorcycle and clothes. In winter, the static electricity is terrible.
When you take off your clothes, you will notice that there are clumps of WHITE lint everywhere, and you will realize that you have been running in an embarrassing state.
If it just happens to be HaGap, fine, but if everything is of this quality, there is no Repeat.
View detail
Fits: BMW K100, BMW K1, BMW K1100, BMW K1200, BMW K75, BMW R1100, BMW R1200 all, BMW R1150, BMW R850, MOTOGUZZI V11, APRILIA SMV750 DORSODURO, BMW F650GS, BMW F800, BMW S1000RR, APRILIA MANA850 , APRILIA SL750, BMW HP2, BUELL LIGHTNING X1, BUELL CYCLONE M2, BUELL THUNDERBOLT Shoulder Bag S3
Engine turns Smoothly
Used for Harley touringMODELTC96
I bought it to improve oil circulation since the Idling RPM is slightly lowered.
The engine is originally powerful, so I honestly feel that the power up is not as much as I can feel, but overall the engine turns Smoothly, and I feel that the RPM rise is a little faster. The engine turns Smoothly as a whole.
Above all, I think the appearance is highly textured and has a high dress-up effect.
The price is a bit high, but I think it is good to be Stress-free and not have to worry about finding an Element for each Oil change and disposing of it after the change.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Used as the outermost Cover of a 2-ply
L L size is just right.
The quality is fine and I would choose this product again next time.
View detail
Fits: HONDA CB1000R, KAWASAKI Ninja 250, BMW S1000R, BMW S1000RR, BMW R1200RS, BMW R1200R, BMW R1100R, BMW R1150R, BMW R100R, BMW R nineT, BMW K1300R, BMW K1300S, BMW F 800 S, BMW F 800 R, HONDA Rebel300, YAMAHA YZF-R6, HONDA CB500X, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR700
I am purchasing this productSeries from Repeater.
We continue to purchase this series of products. The Variation of Large size with actual examples is abundant and just fits. It has excellent weather resistance among covers in the same price range. However, since there is no back-up, the corners of the cowl will get worn after many years of use, but I think that can't be helped. View detail
Fits: HONDA CB1000R, KAWASAKI Ninja 250, BMW S1000R, BMW S1000RR, BMW R1200RS, BMW R1200R, BMW R1100R, BMW R1150R, BMW R100R, BMW R nineT, BMW K1300R, BMW K1300S, BMW F 800 S, BMW F 800 R, HONDA Rebel300, YAMAHA YZF-R6, HONDA CB500X, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR700
Series has been used by Repeater for many years.
We have purchased successive generations of Hirayama Sangyo's Series from Repeater. They are durable, not too heavy, and easy to handle. On the other hand, there is no special inner lining, etc., so the paint on the corners of the cowl will wear off after many years of repeated wearing and taking off. View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Motorcycle Cover
I often buy this Cover because the product seems very durable and good.
I wish it was a little more waterproof. I like the product.
View detail