XG250 TRICKER

I use it on my XG250 TRICKER.

The Motorcycle Cover is a consumable item, so this thickness is sufficient for this price. View detail

I think it is necessary and sufficient.

This is just my personal opinion, but I think it is not a PeLePera, and considering the price, I think it is satisfactory enough. View detail

I went with Gold...

I bought it to go with the rear stand, but I think it would be fine with other Manufactures.
The color jumps with age when exposed to the sun, I think the same for the others.
If so, I'm glad it was inexpensive. View detail

Purchased for spare parts

Purchased as a spare part for my Racer. I have never had any outlier in any Motorcycle from NGK for a long time, so I think NGKBrand is safe to use. View detail

be too much

I would like more room.
Sure, you can get in, but it will be tight-fitting with no room at all.
Recommendation to others is not possible at all.
It's a shame because I had high hopes for it View detail

Just right for NSR250R

I bought this for my NSR250R Cover.
It is not too thick, not too thin, just normal. When you hold the folded Cover, it is zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz. View detail

Best 2CycleEngineOEMPlug

Thank you very much for your help, I wish the response right after plug replacement would last forever, but it's not possible with 2CycleEngine. NGK, please keep on making this plug because I need it for a long time! View detail

Spartan aluminum cut-out fixed footpeg

Aluminum Cut-out Fixed Rear Sets. position is a little bit backward compared to Normal. I am dissatisfied that there is no Pedal ReturnSPG on the Rear brake side, but I bought Master Cylinder ReturnSPG for Master Cylinder separately and installed it. I'm also a little dissatisfied with the fact that the shift side can't be reversed shifted without purchasing repair parts, but I guess that's about it. View detail

BrakeTouch drastically changed, for Stainless MeshFR

I had a hard time with the OEM rubber hose, because the clearance between the banjo bolt of the Master Cylinder and the Fork was too narrow, and I had a hard time with the hose routing etc. The OEM brembo horizontal MASTER might not have been so difficult. I had to cut the handlebar right and left many times to check the interference and tensioning. No Fluid leakage and no problem. View detail

RR side doesn't show much difference in fee rings, but aligns with FR.

One of the troublesome parts of the RS250 is the RR Brake fluidReserver tank in the Seat Cowl. The stop-lamp switch was replaced with a pressure type when replacing the rear sets, and connected with a watertight connector. View detail

Stable braking powerGolden Padχ.

I am not looking for an absolute increase in braking power, but since I use the RRBrake a lot, I feel that it heats up and wears out quickly. I've chosen Sintered padGoldenχ which is highly resistant to fading, and the control is not bad. View detail

Control is the best!

Control leaves are excellent due to the stiffness from the thick back plate, good firing, and good material.
It doesn't bother me because I use it on the circuit, but on the street it squeals until it heats up.
The thickness of the friction material itself is not Large, so I think the durability is fairly normal. View detail

Maybe LL would be better for Z900RS people?

L makes it seem a little small.
If you make it LL, it's just right. View detail

I'm going to be honest with you.

To be honest, I have not yet installed it.
Since actual use is still about six months away, I will write my impressions first.
So, the evaluation is a prediction.

We began by gathering information from various sources before making the purchase.
After all, brembo is installed as OEM, but there is no information on JapanFOR JAPAN MODEL.
I asked the Shop in Italy and received an immediate response, and then asked the Japan distributor to confirm the answer.
PLOT." The lousy reply is that there is nothing that fits in a store called
for "Koken" I received a very detailed explanation from Mr. Kato, who was so kind that I was bowled over.

According to the report, this SA has better performance than the OEM, so we decided to purchase it.
For OEM Product, the end is a number and OEMOption is AlphaBed.
Italy recommended SR's RACING, but I decided against it because it seemed to wear out too quickly.
I was informed by webike that I could get a fit, so that's how I decided to buy it.
However, my wife reported that it arrived with a sound of rattling, and when she opened the package, she found that it was just as shown in the picture.
The packaging was a little more careful than I would have liked, as the pad was placed in a box with a small shock-absorbing cushion on top. View detail

Two years of use and still Large sturdy!

I used it on another vehicle with Blue empty parking for 2 years and it has worked fine with no problems except for some ragged loosening and fading of the fibrous material around the key for hole, so I bought a Repeat!
It is also useful for the Motorcycle body as it does not scratch easily!
I don't know because I have not used it in a dusty or sandy environment, but it works fine in an environment with Concrete and Asphalt floors. View detail

It is also used in Circuit.

It is not a type that is as effective as the Red Pad, which has been sintered, so it is not likely to be easily choked.

The absolute braking power is not as good as ZCOO or Metallica, but the control is excellent.
As for durability, it will not last as long as the 2Brand I mentioned before because it will decrease more than expected. View detail

Genuine Brembo Brake Pads for Brembo 4 pot caliper.

I had a customer in who had upgraded their calipers to some nice Brembo ones but then they needed some new pads. As they did not know what pad code they needed it was pretty easy to find the right ones for the caliper they had. Standard 4 pots. After I knew the part numbers, finding them on Webike was super simple. Just type in the code and away you go. The price was really good from Webike and combined with some other parts in my order, I had them all shipped together to save on shipping separately. I got all my order in 100% perfect condtion in 5 days from shipping. The pads already come in the Brembo packets wqhich do actually protect the pads from damage and debris gettin inside which could contaminate the pad material. Really good pads, you can see the sinter material by just looking at them. There was no debris of excess pad materieal inside the packet which is always a good sign. Once you get them a few 100 miles in, the pads just get better and better. Brilliant purchase. View detail

Ultra-high performance for any time and place

There are numerous types of brembo Brake Pads and they are very complicated.
There are three types of metal pads for road use (public roads) with different characteristics:LA, SA, and SP, and there is also an OrganicPad CC.

The RC we purchased this time is for Race, a type that increases braking force (coefficient of friction) as it gets hotter, and is designed to be used mainly on the front.
Conversely, the coefficient of friction at low temperatures is neglected, and the Pad is not designed for public road use.

The fee ring is an organic semi-metal compounded with carbon, but it is just like a racing pad of a long time ago.
Need to know the characteristics to use it on public roads (always) Loosen. The "Brake" is required to be conscious of the "Brake" (the "Brake" is required to be conscious of the "Brake"), so when used on public roads, it is not good enough to say "Hadrill".
It works great when warmed up, but tends to work too much and too abruptly at street level.

brembo has a Pad called Z04 as a serious for race, but it is even more temperature dependent and cannot withstand very much public road use.
Especially in winter, it can be cold, and it tends to grip→not work at all→grip more→and when the temperature starts to rise, it works rapidly→and falls over, or in fact it does.
The same basic principle applies to RCCompound. Even if you drive on a mountain pass like Circuit, the Range that you can produce with no Brown in a mountain pass is not comparable to the super high load of Circuit, and you will never reach the area where you can show your Pad's ability. You will always suffer from poor feeling no matter how fast you are on a mountain pass.

It is no wonder that they are difficult to use on public roads, as they become much less effective when slightly cooled down.
It works great when it warms up, though.

Overall, this is a for RacePad… for a course that is relatively slow and does not require much brake performance, rather than a course that requires ultra-hard braking.
For example, Course1000 in Tsukuba is the most suitable, and in Course2000 (the main course), a time of less than 1 minute is probably not enough (I can't run in such a time, so I imagine it), but a time of around 7 seconds is very good.

Therefore, no matter how much confidence you have in your ability to drive like Circuit on mountain passes, you will regret purchasing this product for the road, as it is not as good as Circuit's Level. (SACompound is definitely better for public roads, although its braking power when warmed up is slightly inferior.) View detail

Very controllable, soft and effective.

Used with large old brembo RACINGdisc (made of Casting Iron) for city driving.
This is the third time I have purchased this product. The first Pad I purchased is about 10000km and the durability is normal because of the decrease in replacement timing.

It has a Semi Metal-like appearance, but it seems to be of Organic type, and the Touch is very soft.
It is not a gutsy Type, so people who are used to such Pad may get the impression that it does not work.
The softness of the Touch is even more so when combined with Casting Irondisc, and the Large old Casting Irondisc + Fellow Pad. That feeling." Socked to the

The effect rises Linearly to the Lever input, so it should be very easy to use for those who can hold it tightly.
However, when used at ultra-high speeds such as Circuit, it seems to be a little insufficient, and when used at hard braking above a certain Level, the linear sensation fades away, and the Image does not work as well as it was gripped.
However, since it does not work in vain, I can grip it with all my might, and if you are an amateur like me, you can improve your Time........

In city driving (including mountain passes), it does not reach the Level of Circuit's Hard brakeng, so it remains Controllable to the end and is very easy to use in both the Grip and Release directions.
It is also very stable from low to high temperatures, and the feel does not change much whether it is the first shot in midwinter or a hard brake in mid-summer.

It has no temperature dependence like Metal pad, but it is always soft Touch, not hard Touch and lumpy feeling like Metal pad.
Organic and common in the Organic system. The rain changes the effect drastically. The control is as good as in Dry, which is also great.

It is not a type that works with a bang as soon as you grip it, and there is no firmness, so you may have different tastes, but it is very easy to use.
Unfortunately, I purchased two Quantities:Quantity out of 1 Set of 4pcs.:The fact that the paint on the back plate was in a terrible state at 1 pc.
Well, paint can be scraped and prepared with File.
It doesn't matter if the back plate is a little rough or not, because the Caliper piston will melt into the back plate if you break it as hard as you can.
This time, we did not want the touch to be bad at the beginning and to be hard to clean, so we made the Rucksack flat. It is better to start from the beginning with a flat surface, because it is usually a defective Level. View detail

Large change

LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail