Reviews
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
Reliable Brand
Brembo is now the standard equipment on the upper models, but the red color is very noticeable because of the fine detail on the Brake Pads.
SPMODEL is a product that is not intended for racing, so it can be used on public roads.
The product itself is easy to Control and feels good.
View detail
Two years of use and still Large sturdy!
I used it on another vehicle with Blue empty parking for 2 years and it has worked fine with no problems except for some ragged loosening and fading of the fibrous material around the key for hole, so I bought a Repeat!
It is also useful for the Motorcycle body as it does not scratch easily!
I don't know because I have not used it in a dusty or sandy environment, but it works fine in an environment with Concrete and Asphalt floors.
View detail
Fits: TRIUMPH DAYTONA 675, TRIUMPH DAYTONA 675 SE, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE675R, Others NISSINRadial Casting Type, SUZUKI GSX-S1000, SUZUKI HAYABUSA, SUZUKI B-KING, BMW S1000RR, BMW S1000R, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000 R, SUZUKI GSX-S1000 F, SUZUKI KATANA
ZETA
Installation is easy
I used it off-road and found it easy to operate, so I decided to use it on-road as well.
View detail
Pure high performance with no extra features
Of the many brembo Master Cylinders, this was the first to be marketed as a RadialPump.
Strictly speaking, the Cut-out's used for Works machine "RACING" At the time, it cost about 80,000 yen, so only a few wealthy people could afford it, and this is a low-priced version for the general public with a non-cut-out surface finish.
It originally designed for WorksRacer The car is a racing exclusive part, so there is no consideration for the installation of a stop lamp switch, which is required for driving on public roads.
(When it was first released, it was prohibited to drive on public roads.)
It's a good time because now they come with a hydraulic stop lamp switch for public road use.
Nevertheless, hydraulic switches use a portion of the hydraulic pressure to activate the switch, which defeats the purpose of RadialPumping, which is to improve lever touch.
I would not want to use it if possible.
Mechanical Switches are available from various companies, but these are also a bit iffy, as they force you to attach very complicated and delicate objects.
I have modified Lever to operate MechanicalSwitch in a completely different way because it is very intrusive, especially if I frequently maintain the Lever area.
Such Hardship to use public roads." Apart from the "RaceParts", the original RaceParts were very serious RaceParts, so the effect is very effective! The lever touch improves unbelievably.
To give you an idea of the degree of improvement, if the previous operation was a 10-step control from release to lock, it would be 10 times more detailed, with 100 steps of control.
Whereas operations that I thought were full Brake were actually only available up to 9 due to the change to 9→10, with this product I can confidently grip up to 9.9, like 9→9.1→9.2→9.3 ... and so on.
As a result, Brake works better even though changing the Master Cylinder should not make Brake work better.
How to mount the reserver tank, the brake hose routing is different and needs to be redesigned, the banjo bolt pitch is 1.0 (and the brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch needs to be modified, etc. (In addition, brembo requires a shorter bolt than usual because the screw hole is shallow), the stop lamp switch has to be modified somehow, and some ingenuity and modification is required to avoid contact with the cowl and meter.
A more powerful successor is also on the market, but it is loaded with extra equipment and heavier than ever.
If your goal is purely to improve lever touch, this is the lightest weight one.
I wonder if the Body rigidity is higher, or why I feel the Touch is better than the high-end version of CNCCut-outMODEL....
View detail
Genuine R&G Toe Guard for Honda CBR600RR 2010
R&G are a great brand and provide some cracking protection for all models of bikes. They sell a lot for the CBR600RR as these bikes do hit the deck often on track. This toe guard is an essential part when riding on a track as you just do not want your foot or anything in that area in the event of an off. Finding this part number was not too hard as this version does fit a lot of different models and manufacturers. The price from Webike was good value and add with the other items in my basket, I got them all shipped together to save on teh shipping cost. EMS got my order to me in 5 days from shipping. The toe guard is super strong and the bolts that attach this to the swing arm are also really strong. As this is aluminium, it will take a fait bit of hsammer before it gives up the ghost, I know this as I previous;y had one and it took some damage before it eventually snapped. The bolts are threaded really well, the painted finsih is really good and flawless too. Fitted in no time. Very pleased with this and now it will be good to go on the track once again. View detail
Genuine NGK Iridium Spark Plugs for YZF-R1 2002
I wanted to try out the iridium plugs on this old girl for my own peace of mind and to see if there is much difference between these and standard. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4. I have used iridium plugs before with great success as they seem to fire better than standard but never in this 2002 R1. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat.Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks Webike View detail
Large change
LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail
The usual K&N, the usual peace of mind.
There are YOSHIMURA and regular MODELs, but the price is almost the same, so of course I chose the YOSHIMURA K&NOil Filter with Sticker.
It's a Brand that's almost like a standard when it comes to oil replacement, so it's a safe place to start.
The rest is with nut, so it can be quickly tightened with a regular Glasses Wrench or Socket.
You don't have to go out of your way to buy Oil Filter tools and save some money.
I did not use the YOSHIMURA Sticker that I received, but I stuck it on something other than Motorcycle as a decoration. Yes, it is YOSHIMURACup. It looks just right.
I have always been attached to K&N's, so when it comes to Oil Filters, I don't want to use anything else, or even think about it.
View detail
Rust-resistant Material from OEM:Replace with Stainless Steel!
OEM is prone to rust, so we replaced it with this product.
Cap is also included.
Material:I thought about Titanium, but it's too expensive Material:Stainless Steel
Quantity because Front is Double disk.:Buy 3 for 1 Set for 1 Vehicle.
The OEM cap can be removed with a slotted screwdriver.
This is very hard to loosen and almost nappy.
The attached Cap is a Hexagonal Wrench for peace of mind.
View detail
Zr-7 is now 520.
We have finally achieved the 520Conversion of Zr-7 that we have wanted to work on for a long time.
Since it is not a part that is changed frequently, I installed one Up 17T while I was at it.
My personal impression is that the speed increases after the Engine speed exceeds 5,000 rpm, and it feels more comfortable than with the 16T.
I also did not feel any particular sluggishness in acceleration when starting to open the door from the low RPM range, so I have a good feeling about it in general.
View detail
Fee Ring changes!
Just the fact that I changed to brembo makes me happy!
But when I changed Caliper, it was difficult to feel the Fee Ring change, but Radial brake master changes a lot!
Also, it is better to change the clutch lever to CORSA Corta Lever, which is easier to grip and gives a more unified feel.
View detail
Fits: TRIUMPH DAYTONA 675, TRIUMPH DAYTONA 675 SE, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE675R, Others NISSINRadial Casting Type, SUZUKI GSX-S1000, SUZUKI HAYABUSA, SUZUKI B-KING, BMW S1000RR, BMW S1000R, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000 R, SUZUKI GSX-S1000 F, SUZUKI KATANA
Nisshin5/8Inch Radial brake used as lever for master
Nisshin5/8Inch Radial brake master lever.
The standard lever is a short type and its bend position is closer to the pivot, so it interferes with the switch box.
The curve of the lever is very comfortable to hold in the hand, and the position of the bend is closer to the tip, as I had hoped, so the interference with the Switch box has been considerably alleviated.
In the event of a fall, only the lever tip can be replaced, and the structure is designed to release the force without breaking, providing a good sense of security that allows the user to continue driving.
View detail
Fits: HONDA CB125R, HONDA CB250R, KAWASAKI Ninja 250, KAWASAKI Ninja 250R, YAMAHA NMAX155, YAMAHA YZF-R3, YAMAHA MT03, HONDA CB300R, HONDA CBR500R, HONDA CB150R, YAMAHA CYGNUS X125, YAMAHA MAJESTYS, YAMAHA CYGNUS X, YAMAHA YZF-R25, YAMAHA Zeal, YAMAHA YZF-R125, YAMAHA TZR250R, YAMAHA SR500, YAMAHA SRX400, YAMAHA SR400
I'm generally satisfied!
I purchased the L Size for my CB250R for about half the list price.
The compatibility chart lists CB250R as L Size, but in reality I felt that the Motorcycle Cover was a little short in overall height.
Specifically, I am worried when there is snow on the ground because I can see a little of the Wheel in the back as shown in the photo. (I guess I am too nervous).
The front Wheel is also hidden when the Cover is extended all the way to the end, but it may shift and stick out a little in wind or other conditions.
For now, we decided to wait and see until spring.
However, we are otherwise satisfied with the Large change in use.
I especially like the waterproof and moisture-proof feature. I used to use their Motorcycle Cover Kizuna on my previous Motorcycle, and when I compared the product descriptions on the Package, the only difference is that it has a flame retardant finish, but the flameproof Motorcycle Cover Kizuna does not allow water to seep through to the Cover in normal rain, and I felt that it has a higher moisture-proofing function. However, I felt that the flameproof Motorcycle Cover Kizuna has a higher moisture-proofing function. (This may be the difference in the number of years of use.)
We recommend buying the fireproof bond because there is no LARGE difference between it and the unbranded bond at the current Net price.
View detail
Fits: KAWASAKI ZX10R, KAWASAKI ZX-25R, KAWASAKI Z1000, BMW F800S, KAWASAKI Ninja250-1000, KAWASAKI Ninja1000, TRIUMPH Daytona675, KAWASAKI ZZR400, KAWASAKI ZZR1100, KAWASAKI ZX9R, KAWASAKI ZX6R, KAWASAKI ZX14R, KAWASAKI ZX12R, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEP1100, KAWASAKI Z900RS, KAWASAKI Ninja250, KAWASAKI GPZ900R, KAWASAKI ER6
visual improvement over the oem bar ends.
These are straight forward to fit, although I noticed a little gap(a couple mm at most) between the bar-end & the oem grips. These feel a little lighter in the hand than the oem bar-ends (sorry I didn't weigh them to compare) but it dosent seem to cause any noticeable issues whatsoever. Overall, a great looking product, I'm happy with them. View detail
Good goods!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
OEM exchange
I purchased a car with no replacement history, so I thought it was a delivery maintenance.
It is OEM, so no problem!
View detail
Parenthesis OK
Parenthesis good!
I wanted to put it on someday, and although it has a strong bonsai feel to it, it's never too safe.
View detail
For setting up a Circuit run
I purchased this for setting up a Circuit run.
Since the OEM's hinge is 17T, the Rear Sprocket also needs to be changed to a Large size.
View detail
Fits: HONDA , SUZUKI , DUCATI , KAWASAKI NINJA ZX-10R, KAWASAKI NINJA ZX-6R, KAWASAKI NINJA1000, KAWASAKI Z1000, KAWASAKI Z800, TRIUMPH DAYTONA675, BMW S1000RR
Good quality
Accuracy quality is good.
I should have checked the outside diameter dimensions of where the Hook hangs before purchasing.
It would be appreciated if you could indicate the size in the Catalogue Spec.
The diameter of the Attachment of the Rear stand is Small, Quantity:Set was not possible.
View detail