Reviews
Fits: HONDA Super Cub 110, HONDA Super Cub 50 MD, HONDA Super Cub 50 Pro, HONDA Super Cub 50, HONDA Super Cub 110MD (Postal Service Cub), HONDA Super Cub 110 Pro
Reliable OEM Parts
Used on JA07CUB110. The rubber from the new car deteriorated and the bottom became chattering, so I replaced it.
The Rubber is soft so I was able to install it right away. In winter, the Rubber becomes hard,
It may be difficult to install.
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA CROSSCUB110, HONDA SUPER CUB 50, HONDA SUPER CUB110
Overseas OEM Product
It is a little cheaper than the OEM Product sold FOR JAPAN MODEL. We did not feel that much difference. View detail
Used with CUB110
Used on JA10. It is a normal Exhaust Gasket.
Some people don't change it, but I think it is better to change it properly.
View detail
Quantity:Seeking 1 pc!
I used this Gasket when replacing the exhaust system on my CRF-125F. However, I think it would have been better if I could have purchased it as a single item and at a lower price since I use only 1pc. of the Gasket for CRF-125F. View detail
Appearance Refreshing
I am not comfortable with the color of OEMLens, so I chose this Type, which shows an Amber-colored Valve in a transparent Lens, and I like it because it is elegant. View detail
Fits: HONDA glom, HONDA CROSSCUB110, HONDA WAVE125i, HONDA CROSS CUB 50, HONDA WAVE125R, HONDA WAVE125S, HONDA CZ-i110, HONDA ANF125innova, HONDA MONKEY125, HONDA SUPER CUB110 PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110
decent product
I purchased it for Monkey 125. I'm sure you'll get a different feel if you add a full exhaust, power filter, and iridium plug.
It would be a bonus to have a longer exchange cycle. The price is cheaper than I expected, so I plan to continue purchasing it in the future.
You will know how long the replacement cycle will be once you use it. -------------------------------------------------- -------- I bought it for Monkey 125. If you add a power filter and Iridium plug to the full exhaust, you will be sure you can feel different. It would be a bonus to have a longer exchange cycle. It is cheaper than I thought, so I will continue to buy it in the future. You'll know how much the replacement cycle is. Powered by Google Translator
View detail
Satisfied
I think I bought it very cheaply. There are several types of Monkey 125 oil filters, and this is the cheapest.
It is a consumable item anyway, and the more you buy, the more you will benefit.
I am very satisfied because I was able to purchase it much cheaper than in Korea.
I plan to use it again next time. -------------------------------------------------- -------- I think it's very cheap. There are several types of Monkey 125 oil filters, the cheapest price. Anyway, it's a consumable, the more you buy it. It is very satisfactory because it can be purchased much cheaper than in Korea. I will use it again next time. Powered by Google Translator
View detail
Can also be pontoon-mounted on the 21-year MODEL.
It says it fits Gixxer 150 2BK-NG4BG.
It could be popped into the 2BK-ED13N, a 21-year MODEL.
It used to stall when starting sometimes. I hope this will solve the problem...
View detail
Cheap and satisfying
It was cheap and easy to install.
I'm happy with it
View detail
Fits: HONDA Super Cub 110, HONDA Super Cub 50 MD, HONDA Super Cub 50 Pro, HONDA Super Cub 50, HONDA Super Cub 110MD (Postal Service Cub), HONDA Super Cub 110 Pro
Cheap and satisfying
It takes a lot of force to put it on.
Once you put it on, it doesn't come off so easily.
View detail
For 16TDriveSprocket
I replaced the 14T with a 16T when I switched to a DriveSprocket without any interference with the Sprocket.
It is comfortable to use.
View detail
Cheap and satisfying
I felt it was no different than OEM. View detail
Inexpensive OEM compatible Oil Filter
This is the only one I use because it is less expensive than OEM.
I can't compare filtration performance with OEMs, but I don't see a problem.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
A slightly better one.
I have been using a cheap Chinese one I bought from Amazon.
I used to have to put on and take off the cover for a LARGE amount of time, and in the summer, I was sweating before I left.
This makes it a lot easier than those. It's also flame retardant and seems to be Large sturdy even if you don't wait a bit to apply it (for now).
Anyway, I don't want to go through the process again of applying Cover, putting my hand under the Motorcycle, applying Buckle, and so on.
However, I wonder if the holes on top of the Cover to release moisture are functioning properly.
I would like to see more products like this from other places to compete.
View detail
Fits: HONDA MONKEY, HONDA CT125, HONDA MSX GROM, HONDA DAX125, SUZUKI Gixxer, HONDA GROM, HONDA SUPER CUBC125, HONDA SUPER CUB110ThailandMODEL, HONDA SUPER CUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA GORILLA
It is easy to install.・・・
When tightened, I think the Spring washer is adversely affected. In the end, I took out the spring washer, adjusted the spring washer with the adjust nut, and then tightened the bolt additionally. Maybe I am not using it properly. View detail
It's still good
I have been using this product series from Large Motorcycle to Moped for a long time.
I do not use the old ones because there are no exhaust leaks and they are inexpensive, so I feel comfortable installing new ones every time I use them.
If you are concerned about the possibility of exhaust leaks after reuse, the safest thing to do is to use a new one.
View detail
Fits: HONDA CROSS CUB PRO110, HONDA CROSS CUB PRO50, HONDA SUPER CUB 110, HONDA SUPER CUB PRO110, HONDA SUPER CUB PRO50, HONDA SUPER CUB 50
It is for business use only.
I bought this product because I felt that the givi was not white enough for my needs and I wanted more capacity.
However, I don't know if it is unique to FRP, but it smells like a refrigerator on display.
It fades after a while, but I personally find the Point quite annoying, so I gave it 4 stars.
If you are worried that the Rear box won't hold as much stuff as you think due to its shape, or if you are worried about theft with the Homesense box, this is for you. It is useful for daily use such as shopping.
The lid has a stopper to prevent it from opening too wide, but it can be opened large enough so that it will not close by itself even if it is stopped by the side stand.
The key is not an internal slot like GIVI, but a regular key.
Below are some notes on purchasing
First of all, there are two types of keys:different key numbers and common key Spec. The common key is intended to be used by specific people, such as company employees, and can be used freely without exchanging keys.
This means that there is a possibility that someone else has a key with the same number, so those who are concerned about this point should purchase a key with a different key number.
Naturally, since it is for commercial use, it is made on the premise that you can either process it yourself or throw it into a store.
Included Parts:Screws and Nylon nut (Think of it as a Nut with a loosening stop, maybe M6 or so.) A large washer (about 30mm), a paper pattern for drilling holes, and a bracketQuantity for fastening the washer to the carrier.:Two bolt nuts are included in the kit so that a large-sized business motorcycle can be installed without the need to purchase additional bolt nuts or other accessories.
The hole size and other information are written on the pattern paper for drilling holes, so holes can be freely drilled and installed according to the direction and position of installation. (I didn't know what to use to drill the FRP, so I did it with an iron drill.) 。
The bottom is bare of fixing screws, so if you are concerned about it, please put an insulator on the bottom. (Urethane mat is available as an Option from the Manufacturer) 。
View detail
M&H Mazda StripeLED Bulb installed in Z125pro (last model)
[How is it used? Mostly city driving
Was the one you received as per Image? Yes.
Was the installation difficult? Quite easy.
How was your experience with it? The color of Light becomes White, and it is very good to brighten it up.
[Included Parts:were they on? None
[Was there anything that disappointed you? None
Point and hang of installation HEXBoltQuantity holding the head lampCover:Pair (for Left and Right) and loosen the Bolt under the Head lampCover to reach the Valve of the Light. Then, simply remove the cover, remove the bracket that holds the valve, and replace it. No modification is required.
It is better to use LEDs for the position lamps as well, since the overall color is whiter.
View detail
LED Headlight Bulb for Z125pro (last model)
[How is it used?
City Riding/Touring
Was the one you received as per Image?
Yes.
Was the installation difficult?
It's easy. No machining is required. All you need are ordinary tools.
How was your experience with it?
The light color is WHITE, brighter and very good. See photo for color difference.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Head lampCoverQuantity with HEXWrench:Pair (for Left and Right) HEXBoltQuantity:Remove the 2pcs. and loosen the normal bolt that holds the bottom side of the Head lampCover. There is no problem to install the valve, such as the large size.
[ITEMS TO BUY TOGETHER
LED Position Lamp (T10Type)
The low price with a reliable Brand is sufficient to meet the demand for LED conversion.
View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail