Reviews
ODO 10,000km mounted on HondaSUPER CUB
Ignition coil, Cable, and Plug cap are Quantity:We propose a product lineup that is a set (you can choose). (BUSINESS patent registered w) View detail
Oil pump
This is constructed much better than the oem oil pump. It appears to be made of high quality material. I have installed more than one of these and they all fit perfect with no modifications. It came packaged very good and had no damage. Also comes with a cool sticker! View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50-PRO, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA SUPER CUBC125
Nice retro looks
The visor looks great and feels pretty hefty, seems to be made of a good material. It's easy to install on the bike but do be careful when removing the plastic ring around the headlight... I broke 1 of the tabs inside during the removal but good thing it didn't affect the reinstallation View detail
Fits: HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB, Others For STD Handlebar
Looks great
Love the look of this flat bar end thou it feels slightly lighter than the stock bar ends. Do prepare a flat wrench to hold the handlebar inner tube in place so that it doesn't move around when you're trying to screw/unscrew the bar ends View detail
Simple and clean
Simple and clean design that is easy to install. Visor is slightly tinted and helps to reduce glare on the dashboard. The shape also helps to direct frontal wind upwards so it doesn't hit rider's torso heavily. View detail
Fits: HONDA HRC Grom (GROM5), HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
Stable and easy to use.
I use it every time I change Oil.
Filter, Packing, etc. is Quantity.:It's a Set.
You won't get lost.
The price is also good.
View detail
New Calipers
Excellent. Easy to install if you know how to flush and bleed brakes properly and it comes with brake pads. It's not going to send you flying over the handlebars but now the pads are seated, the braking is more responsive and much more so if you're riding witha passenger - it now stops much more confidently. NOTE!: Don't forget get to order the crush washers that go with it! View detail
Fits: Others , HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA CT125CT110 HUNTER CUB
CUB to Overhaul of the.
CUB I used it for the Engine Overhaul. The price was low and it helped me a lot. They are a reliable manufacturer. View detail
Rear caliper replacement
OEM is less noticeable due to the paint color and the beauty of the plating, Large change satisfactory. View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Fits: HONDA Super Cub 50, HONDA SUPER CUBC125, HONDA CROSSCUB110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110ThailandMODEL, HONDA CUB100EX, HONDA CROSS CUB50, HONDA SUPER CUB 50
Chain case hole replacement
Too easy to install, conversely, theft is a concern. View detail
If you have small hands, this is Recommendation.
CROSS CUB (JA60) I bought it for.
I have small hands, so I was having trouble reaching only a few fingers with the OEM Lever, and this was recommended to me.
I did the installation myself and it was not that difficult.
I really like the fact that I can adjust the position of Lever after using it!
It is easier to grip and much more secure.
Also, I wasn't expecting much. Foldable." I was also impressed… when I experienced it the other day in an unexpected standstill. I am glad I replaced it.
I love the calm color of Gun meta and the colorful Red adjust lever.
View detail
Fits: HONDA SUPER CUB125, HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA CT125 CT110 HUNTER CUB
KOOD Front axle shaft
The difference can be seen from the handling of the motorcycle. The Axle Shaft is straight and stable, and has less wobble at low speeds. It may not look like a PR item to others, but I can assure you that it is the first part you should buy! View detail
Hollow Axle Shaft
Compared to genuine products, you can feel that the material and painting are better. The installation method is the same, but the size of the nut is different, so check it before installation. View detail
KIJIMAGrip heaterGH08Push Switch
It's been about two weeks since I installed it and so far no problems.
The Grip is a little thicker than I expected, but it is just right for me. I was thinking that I would mishandle the Switch if I used the type attached to the Grip, so I chose this type, and it was the right choice. It is easy to operate and I feel it is convenient to attach it anywhere I want. Also, my palms are quite warm if it is 4 degrees Celsius in the morning and the temperature is at the maximum. But only my fingertips are hard to keep warm. If you want to keep it on all the time, I think the 3rd or 4th of 5 levels would be best. I think the 3rd or 4th out of 5 levels would be best if you want to wear it all the time.
Electrothermal Gloves or Inner Electrothermal Gloves (You will need to bring your own Gloves separately) Would it be good to have a And.
With the skin Gloves with boa, the palms will feel sweaty.
View detail
Good item for monkey 125
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Fits: HONDA glom, HONDA MONKEY125, HONDA SUPER CUB C125, HONDA CT110 HUNTER CUB CT125, HONDA DAX125
It was able to be used without problems
The size of the O-ring on the Oil Filler Cap seems to be a little smaller than OEM. The O-ring size of the Oil Filler Cap seems to be a little smaller than the OEM one, but this is not a problem with the installation. View detail
Fits: HONDA SUPER CUB C125
Nostalgic bean-jam-filled wafers (Monaka) Good sound to
[How is it used?
Mainly commuting and occasional touring
Was the one you received as per Image?
Image as it is, Moriwaki Bean-jam-filled wafers (Monaka) Because it is extremely lightweight
The weight was found to be OEM 3.8 kg, Moriwaki 1.5 kg, and the difference 2.3 kg.
The weight scale was used to weigh Scale. See image].
Was the installation difficult?
I was easy, I was.
How was your experience with it?
The Torque feeling is stronger than the OEM exhaust system, and the sound has more of a heartbeat than the OEM system, and we are satisfied with the Large change in the engine's performance.
Hairline without Burnt Color (HL-Ti) Since it is a finishing touch, it is gradually becoming my burnt color. See image].
[Included Parts:were they on?
The packaging was perfect, the Included Parts:were well secured, and the corrugated ball was thick and hard enough to protect the Exhaust System.
[Was there anything that disappointed you?
As expected of Mr. Moriwaki. It was just as I expected.
Other items that would be helpful
Pay close attention to the combination of Point and hang:EX.Flange in the installation.
The Instruction Manual is clearly illustrated with detailed notes, so please read it carefully before installation.
Items that should be purchased together are Gasket
View detail
Simple construction
[How is it used?
Used to install a GIVI Box.
Was the one you received as per Image?
The Pipe diameter was thick and strong enough, just like the Image.
How was your experience with it?
GIVIMono-lock basePlate was also fixed firmly and was simple and well made.
[Points to note]
Quantity:Pair (for Left and Right) The two symmetrical parts were aligned at the back center and bolt-tightened.
The screw holes on the tire house side were a little difficult to align, so we installed it by picking up the four screw holes little by little.
How did it compare to other products?
No comparison was made.
▼Other than that... I tried to install KIJIMA's back support item number:210-4963.
The Shock absorber side of the OEM Carrier has a thin wall on the inside of the Shock, while the Shock absorber side of the OEM Carrier has a thin wall on the outside of the Shock.
The GIVI rack is thick-walled, and the thick flat washer on top of the Shock is removed and tightened with a cap nut.
The thickness of the plate on the Cap Nut side of KIJIMA's back support eliminates the screw space for the Cap Nut to stop.
It could not be installed.
View detail
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CT110 HUNTER CUB125, HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB110PRO, HONDA SUPER CUB C125, HONDA Dio 110, HONDA LEAD 125, HONDA PCX 125, HONDA PCX 160, HONDA PCX ELECTRIC, HONDA ADV 150, HONDA HORNET250, HONDA HORNET600, HONDA CB 125R, HONDA CB 250R, HONDA CBR 250RR, HONDA CBR 600RR
Too easy to put on and take off.
If you squeeze the bottom first. The rest was easy to put on and take off with a zip!
It's really easy:??
I am also happy that I can hang it right away without any problems!
View detail