Reviews
takegawa is best
Before purchasing Takegawa brake arm joint, I thought about it with Kitako product. I bought a brake adjustment bolt with Kitako, so I was going to make it into a set. but I bought Takegawa Arm Joint because the design and details looked prettier. The finish of the material is good as I thought, and I haven't installed it yet, but I think it will go well with Super Curve because I bought it in silver like a genuine product. Thank you. View detail
Made by DAYTONA
[How is it used?
Used to replace front and rear Drum Brake Shoe,
Because the previous Shoe replacement time was unknown and it was not working well.
How was your experience with it?
When Brake was applied with the same sensation as before the replacement, the Rear brake worked so well that it locked up!
How did it compare to other products?
It may not be as effective as a disc brake, but it is as good as a disc brake, and I am very satisfied with the large size.
[Points to note]
Nothing in particular, but beveling of the shoe, cleaning of the drum brake, and grease up are also required prior to installation.
Brake wires, clutch wires, and other parts were also replaced, both front and rear, but it was not a difficult job, as it was started in the morning and finished before noon.
(I'm giving it 4 stars because I'm not sure how durable it will be.)
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail
good choice
I bought it after seeing a review that you often replace it with a set with Takegawa reinforced coil. I bought any color because it was hidden in a cowl, and I connected the ngk power cable with the Takegawa reinforced coil and installed it. I had to cut the length and install it, but I thought there would be some loss, so I just connected it. It starts up well and I think it's effective in output. Thank you. View detail
Very high CP ◎No accuracy problems
[How is it used?
Installed on a JC75 Grom.
The custom is an external Full Exhaust System, Mukawa N-15 High Camshaft, i-map, and a mid to high speed Emphasis on Torque Light tuneSpec. with air cleaner processing.
At the same time, DID's SUPERNon-seal Chain was installed.
Was the one you received as per Image?
The image is just as I imagined.
Was the installation difficult?
The maintenance stand I bought the other day didn't fit, so I had no choice but to ask the Shop to install it.
How was your experience with it?
The 14T was introduced, 1T lower than the OEM 15T. The Grom's 4-speed Mission is easier to enter the power band when the Final is set to CROSS, and acceleration is lighter with a higher GEAR ratio in 4th gear.
As a Merit, the Torque feeling during acceleration has been improved as intended, and the expected acceleration feeling can be obtained even when climbing hills. Also, the maximum speed on level ground has increased.
As for the Demerit, fuel consumption will deteriorate because of the higher cruising RPM, and the noise and vibration are somewhat annoying when cruising at high speeds. Naturally, the maximum speed is also reduced. In addition, Groms have a speed sensor in the transmission, so the speed meter can be inaccurate. Groms are happy (displayed higher) by about 10%, but they are also unhappy by about another 10%. (e.g. GPS:60km/h Meter before replacement:66km/h Meter after replacement:72km/h)
[Included Parts:were they on?
HolderPlate is included; Bolt is also recommended for replacement but not included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you want to dress-up the Sprocket Cover, you should purchase it first.
View detail
Used on a 50cc 2Cycle moped. Quite bright!
I originally used M&H Mats Stripe Halogen bulb 12V35/30W Clear, which was brighter than OEM, but still old mopeds are still dark.
Since I use them for commuting, I decided to use LEDs for safety reasons.
Installation can be done simply by removing the headlight cowl.
The color is a beautiful White and the brightness feels 1.3 to 1.5 times brighter.
The white color is more like a recent vehicle than the yellow color, which makes it a better parenthesis.
I think it is a good cosmetic product because it is inexpensive and made by Mats Stripe, which is a reliable company!
I use it on my AF35LIVE DIOZX, but the Valve is PH7 because I replaced the Headlight with an external one.
View detail
Fits: HONDA CHALY 70, HONDA XL80, HONDA CHALY 50, HONDA XL50, HONDA CB50, HONDA XE75, HONDA XE50, HONDA R&P, HONDA XR80, HONDA MOTRA, HONDA MONKEY R, HONDA MONKEY RT, HONDA JAZZ, HONDA DAX, HONDA DAX70, HONDA Nauty Dax, HONDA GIORCUB, HONDA APE 100, HONDA APE 50, HONDA MAGNA50
I appreciate the Lineup of each tooth number of Sprocket with old car gaiters.
The 50CCE engine was replaced by the 100CCE engine, and the Sprocket was installed to increase the speed. This type of KITACO's Sprocket has a lineup of teeth and is very useful even though it is for an old vehicle. View detail
affordable price for good quality product
these item is very useful for those who want to get perfect spark for the bike - the Cables are designed for the serious racing enthusiast and feature high temperature silicone outer jackets, solid copper wire strand core and high temperature resistor covers, leading to improved engine performance View detail
Cheap and satisfying
It was cheap and easy to install.
I'm happy with it
View detail
The one I'm sure of
It is stable and high quality. I have had no problems with it and have been using this plug since the Normal engine. Currently at 80CC.
I don't race, so I don't keep running at high rpm, but I have no complaints about starting, fuel consumption, and response in daily use. The price is a few hundred yen, so I change the plug every 10,000 km or so.
View detail
If you want to put on Oil cooler!
Installed to attach oil cooler!
Cheap and cosy?
View detail
Sometimes it is more Large strange to remove an old OEMRubber.
[How is it used?
I purchased this product to do a little dress-up work on a long-abandoned LITTLE CUB after maintenance &restore had been completed.
Side StandRubber was installed in a high percentage of Honda cars in the 1980's and 1990's. Even when the ground was soft at the parking position, it was very useful because it was difficult for the stand to be buried.
The vehicle we acquired this time did not have any deterioration of Side StandRubber, but we changed Footpeg Rubber and Kick Pedal Rubber to Brown as well as Refresh, so Side StandRubber was also changed to Brown.
Did you receive the item as per the Image?
Since they are the same brand, both Footpeg Rubber and Kick Pedal Rubber are Brown, and I am self-satisfied with the color.
Was it difficult to install?
Less difficult, but the old Side StandRubber won't come off!
The mounting part was deformed, and the rubber was firmly wedged in the rubber due to rust, so it took a long time to come off, even though I sprayed oil spray all over it.
After removal, the deformation of the mounting area should be corrected, the rust prevention process should be performed, and then the mounting procedure should be reversed to complete the process.
Older vehicles or vehicles that were ... in storage conditions may have a hard time.
How did you like it?
The functional part of the product is the same as the OEM, and it does a good job of preventing the sinking of STAND.
The number one effect is. They're pretty to look at." It is a modest and unobtrusive part of the project, but it is highly self-satisfying.
Was "Included Parts:" attached?
Side StandRubber1pc. only.
Were there any disappointments?
As I mentioned above, it has the same effect as OEM and looks pretty enough to meet our expectations.
Other items that would be helpful
Point and hang of installation
As mentioned above, for some vehicles, removing the originally installed OEM parts can be a tedious process. 'A simple job to remove OEM Parts and install this product' It is
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...?
Well, if you are buying this product, you know which Parts to replace, so I don't see any problem.
[Notes]
Depending on the condition of the STAND section of the vehicle, force may be required, so please be careful not to injure yourself.
[ITEMS TO BUY TOGETHER
Footpeg Rubber and Kick Pedal Rubber are also sold by the same KIJIMABrand, so it would be fun to enjoy color coordination.
Whether you want a unified look or dare to use RoseRose's colors, please fully demonstrate the buyer's Sense.
[Opinions and requests to Manufacturer
Please continue to sell the current Color line nap for many years to come.
View detail
It's brighter than a white-hot bulb.
Installed on a Honda NSR80.
The NORMALWhite heat bulbs in the NSR80 were very dark, so we replaced them with LED bulbs to make nighttime driving somewhat safer.
If anything, it is not for the purpose of illuminating the road surface, I'm here, Appeal." I think it is highly satisfactory if you consider that LEDs for
In NSR80, the heat sink part of the Light case and LED Lamp is the contact limit. There is no problem.
View detail
With 88ccBore up
Used for 6v CHALY 70
88ccBore up and MONKEY 4-speedMission transplant and
I chose this product because it was converted to Manual clutch.
I chose the one with PrimaryDriven because there was not much price difference.
For integration, it is recommended to have a Shock driver as well as a dedicated tool.
I have now driven about 400km since incorporation.
So far, no problems.
I am satisfied with Large change
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Thanks!
I chose the existing small sprocket while trying to change it by changing the chain. I'm very satisfied because it seems to deliver the speed well. View detail
Fits: HONDA CB125, HONDA CBX125, HONDA DJ-1, HONDA gyro canopy, HONDA TLR200, HONDA Super Cub 50, HONDA Lead 50, HONDA Lead 90, PGO MyBuBu125, SUZUKI K90, SUZUKI street magic, SUZUKI birdie, SYM fighter150, YAMAHA Cygnus, YAMAHA Cygnus, YAMAHA jog, YAMAHA jog sports, HONDA CBR125, KYMCO SOONER100, HONDA WAVE125
Product # 1P2004
One of my friends has a rare YAMAHA Town Mate 6 volt motorcycle. He was faced with the problem of finding incandescent headlamps. We are very lucky that this product is available in the webike. The workmanship is good. Great price. View detail
Fits: HONDA SUPER CUB110PRO, HONDA TACT, KAWASAKI KX85, KAWASAKI KX85-II, KAWASAKI Z650, YAMAHA PW50, YAMAHA YZ250, APRILIA RX50 (Aprilia), APRILIA SCARABEO50, DUCATI 900SS, DUCATI 906PASO, DUCATI MONSTER400, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER620, DUCATI MONSTER900, DUCATI MONSTER900, DUCATI SS800, DUCATI SS900
Standard Custom
High Response compared to OEM.
It was easy to install
View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Better looking and performing front drive sprocket then the original Honda part
About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a medium carbon steel resulting in a lighter and harder wearing part. About the feeling of use, A better looking and performing drive sprocket then the original Honda part. Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a rear driven sprocket and drive chain to your cart. Difficulty of installation, I can say the fitment of the drive sprocket for my installation was easy due to the ease of access and simple nature of placing the sprocket into the shaft and securing with the included locking plate. Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Fits: Others For SP Mukawa's Clutch Cable, Others Vehicles equipped with SP Mukawa's dry clutch cover, Others Vehicles equipped with SP Takegawa Die Cast Clutch Cover, HONDA XR100 Motard, HONDA XR50 Motard, HONDA 12VMONKEY, HONDA 6VGORILLA, HONDA 6VMONKEY, HONDA Ape100, HONDA MONKEY R, HONDA Ape100, HONDA Ape50, HONDA Ape50, HONDA MONKEY RT, HONDA Ape50, HONDA MONKEY, HONDA MONKEY BAJA, HONDA 12VGORILLA, HONDA 12VGORILLA, HONDA 12VMONKEY
I bought it because it was old.
I bought this because my Clutch lever was getting old. As expected from Mukawa, the quality is high. View detail
Fits: HONDA NSF100, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA DAX125, HONDA MONKEY125, HONDA MONKEY125, HONDA MONKEY125, HONDA glom, HONDA glom, HONDA glom, HONDA CROSSCUB110(FI Vehicles), HONDA CROSSCUB110(420Conversion), HONDA CROSSCUB110(420Conversion), HONDA SUPER CUB110-PRO(FI Vehicles), HONDA SUPER CUB110PRO, HONDA SUPER CUB110(FI Vehicles), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110(420Conversion), HONDA SUPER CUB110, HONDA APE 100
Honda's Mission mopeds are Large body compatible.
[How is it used?
I bought it to refresh the drivetrain which had been neglected for a long time, and to replace it with a Driven Sprocket that was swung to the maximum speed side about 2 guns more than OEM because I replaced it with a 90cc Engine of Tanaka Shokai. I bought it to refresh the drivetrain.
Was the one you received as per Image?
KITACO's Custom parts has been helping me a lot since I got my moped license in the summer when I was 16 years old.
Honda's DriveSprocket for mini bikes is the same as the Large body, so it was a product that I was too familiar with and passed by the Image because I have been using it since I was participating in mini bike races with my NSR50.
Was the installation difficult?
The Driven Sprocket is easier to detach than the Driven (Rear sprocket).
The SprocketBody can be easily removed by removing the Cover, removing the two Bolts holding the Sprocket & Holder, and removing the Holder along with the nails.
When installing, the reverse of the above procedure is used to complete the assembly.
How was your experience with it?
Is this a steel product to reduce weight? It is a steel product, but it has a hole in it moderately, which could be mistaken for a hole for fixing the Holder.
Although it does not have the noise reduction rubber like OEM products, its durability is no less than life, and its price is reasonable and the number of pins is abundant. When I was enjoying mini bike racing, I owned several types of Driven Sprocket to change the number of pins by CourseLayout and do some kind of setting.
[Included Parts:were they on?
One Driven Sprocket and one HolderPlate for fixing.
[Was there anything that disappointed you?
I have used them for over 30 years on various Honda-based Mini bikes and have never been dissatisfied or disappointed.
Originally, DriveSprocket is a discreet Parts and is covered by Case cover in NORMALSpec. Motorcycle, so it is a Parts that is only seen in terms of functionality.
Other items that would be helpful
Point and hang of installation
Since it is easy to remove and install, the work tends to be messy, so do not be in a hurry to make sure that you do not forget to tighten the screws.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the product is easy to understand.
[Notes]
Since you will be working on the drive and braking systems, be sure to carry out the work properly and reliably.
[ITEMS TO BUY TOGETHER
Aside from replacement for setting, if replacement is due to wear, the front and rear Sprocket & Chain are in the Quantity:This is a place that should be replaced by Set, so please consult with your budget before purchasing.
Since the rear wheel is to be removed and attached, if there is room, it is better to take the rear brake shoe into consideration as well, since it can be done in one operation, making it easier later.
[Opinions and requests to Manufacturer
I continue to be a customer for various parts of Mini bike and I look forward to working with you in the future.
View detail
Fits: HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA Monkey Baja, HONDA MONKEY RT, HONDA MONKEY R, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MOTRA, HONDA MAGNA50, HONDA MAGNA50, HONDA CL50, HONDA BENLY50CD50, HONDA BENLY50CB90, HONDA BENLY90 S, HONDA BENLY50S, HONDA CUB PRESS, HONDA CUB PRESS, HONDA CUB PRESS
For the LITTLE CUB, it's consumable. (Cheaper than OEM Product) 。
[How is it used?
I purchased this product to use when replacing the Exhaust System on my long neglected LITTLE CUB that was given to me.
The OEM Exhaust System was used to replace the OEM Type Other Brand Product because the lower surface of the OEM Exhaust System had become rusted and worn out due to moisture and age.
When I actually owned a LITTLE CUB, I found it troublesome to remove and install the exhaust system every time I removed the shaft of the rear wheel to change tires or sprockets. Do I have to replace the exhaust gasket every time I do that? I felt indescribably happy.
It is said that there is a backdoor technique, but in case of OEM exhaust system installation, the silencer part of the exhaust system and the shaft are on the same line, which is the most troublesome spec. for maintenance, and the exhaust gasket is not in quantity.:This product is very helpful for DIYers, as it is 1 set of 2pcs. and reasonably priced.
How did you like it?
This is a great product with OEM same etc. Exhaust Gasket.
How did it compare to other products?
I have only used OEM products or KITACO products for the Exhaust Gasket, so I am only talking in that category, but as I mentioned above, my personal impression is that it is the same as OEM. "Inferior." I have never felt this way before, and I have used it many times in the past for various types of vehicles.
[Points to note]
In the case of older vehicles, the area around the exhaust pipe on the engine side may be obscured by soot, and since the gasket is also crushed, it is easy to overlook and often forget to remove the old gasket.
Other items that would be helpful
【Included Parts:presence or absence】.
Exhaust Gasket is the Quantity:2pc. There are no Included Parts:only SetPackaged.
I would like to see the status quo maintained rather than the price increase due to unnecessary decorations and Included Parts:.
[ITEMS TO BUY TOGETHER
This product is used when removing and installing the Exhaust System, so if you want to replace the Exhaust System with Other Brand Product, please select the desired Exhaust System.
If you remove and install the Exhaust System with bare hands, sebum and oil stains will adhere to the Exhaust System and discoloration or burn marks will easily occur when the Exhaust System is heated up.
[Opinions and requests to Manufacturer
Please keep the price at the current level as much as possible.
View detail