Reviews
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
SBS Street pads fitting to GSX-R1000
Never tried this brand before in this bike that is the GSX-R1000. Have tried most other brake pad brands of similar materials but never the SBS brand. Finding the right pads was easy too, see SBS website. Vost of pads is good value. Also bought the front set to make all around same brand SBS. Shipping good value and arrive in less than a week. Fitting was easy as old were already out. The material is clearly a sintered style and feels nice. Hope these work as good as the Brembo. View detail
Used in Circuit
Installed on 1199 Panigale SFor Racing car. it may be difficult to experience the performance with PadSingle Body.
My impression of the combination with brembo's FloatingRotor in Circuit is that it is quite easy to control. Rather than stopping with a thud, it decelerates and enters the Corner with a drag of Breaking. I have no complaints when using it with Circuit.:I would recommend doing it in Set, though.
View detail
Great looks. as a cap bolt….
Do not over-tighten or apply Screw lock agent by mistake, as the material is material and will quickly lick the hex holes.
I want to install it firmly because it is for fixing Stay which supports important parts around Handlebar ….
View detail
Fits: SUZUKI HAYABUSA1340 , MV AGUSTA F3 800, BMW HP4 SPORT (13-) Brembo radial mount cast monoblock, BMW HP2 SPORT (08-) Brembo Radial Mount Cast Monoblock, SUZUKI GSX-R 1000 , MV AGUSTA F3, MV AGUSTA BRUTALE1090RR, bimota DB7, bimota DB7 , TRIUMPH Daytona 675 R, SUZUKI GSX1300R Hayabusa (Hayabusa), SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, MV AGUSTA F4 RR1078, MV AGUSTA BRUTALE1078RR, KTM 990 SMR, KTM 690DUKE R, KTM 1290 SUPER DUKE R, KTM 1190 RC8R
Endurance for Race!
I chose it for its durability because the ZCOO I had put in new for endurance had lost half of its value in an hour and a half of practice runs.
I had been using ZCOO and knew that it had good Control and durability, but the price was too high, so I went with ZCOO, which was less expensive and worked well, but the durability was not good enough.
We decided to go with Endless because of its proven track record.
I think we can now run for 4 hours without worry.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX1300R HAYABUSA, APRILIA RSV-4R, APRILIA RSV-4R APRC, APRILIA RSV-4 FACTORY, bimota 3D 800 TESI, bimota 1200 IMPETO, DUCATI 848 EVO, DUCATI 998 PANIGALE V4R, DUCATI D16RR 990 DESMOSEDICI RR, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, DUCATI 1098 STREETFIGHTER S, DUCATI 1100 HYPERMOTARD, DUCATI 1100 HYPERMOTARD EVO SP
Genuine SBS Racing Sinter Front Brake Pads for KAWASAKI NINJA ZX-10R 2016
Now these are a set of pads that we really wanted to try on a track specific bike. Yes, there are other options for a track bike but figured we would start here with the race sintered version. Finding the correct part was pretty easy as I visited SBS website and put my model details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads look absolutely mean as hell. The material looks real coarse but not like they will rip the discs to shreds. I did not fit these as the bike already had good pads. I know they will be fitted to the bike on the next track day, I will edit this review once I get feedback on the pads after this. Thank you Webike for providing great products. View detail
Fits: SUZUKI GSX-R1000, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE RR, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE CORSE, MV AGUSTA 1078 F4RR, MV AGUSTA 1078 F4RR312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4 LH44, MV AGUSTA 1078 F4R312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4RC, MV AGUSTA 1000 F4 CC, MV AGUSTA 1000 F4R, MV AGUSTA 1000 F4, MV AGUSTA 1000 RUSH, MV AGUSTA 800 SUPER VEIOCE, MV AGUSTA 1000 BRUTALE RR
Good Touch, isn't it?
I put it on and ran it for a while to break it in. As expected, the first few times you don't get a firm grip, it slips. Touch is the same as OEM. View detail
Fits: APRILIA RSV4 APRC SE, APRILIA RSV4 Factory, APRILIA RSV4 Factory APRC ABS, APRILIA RSV4 R, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA TUONO V4 RR, APRILIA TUONO V4 RR Factory, BENELLI TNT 1130 R, bimota BB3, bimota DB8 Oronero, bimota Impeto, bimota Tesi 3D Race Cafe, BMW HP2 Sport 1200, BMW HP4 Race, DUCATI 1098, DUCATI 1098 S, DUCATI 1199 Panigale Superleggera, DUCATI 1299 Panigale R Final Edition
Replacement from OEMPad
The initial Touch is better than OEM and Control is easier. I am also satisfied with the performance. View detail
Fits: APRILIA RSV4 APRC SE, APRILIA RSV4 Factory, APRILIA RSV4 Factory APRC ABS, APRILIA RSV4 R, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA TUONO V4 RR, APRILIA TUONO V4 RR Factory, BENELLI TNT 1130 R, bimota BB3, bimota DB8 Oronero, bimota Impeto, bimota Tesi 3D Race Cafe, BMW HP2 Sport 1200, BMW HP4 Race, DUCATI 1098, DUCATI 1098 S, DUCATI 1199 Panigale Superleggera, DUCATI 1299 Panigale R Final Edition
For brembo STYLEMA of New Model GSX1300R HAYABUSA
I had used this Type C in my previous Motorcycle, so I decided to use brembo STYLEMA in my New Model GSX1300R HAYABUSA. [Stillma] I used it on a 108mmPitch Caliper.
I bought it because I had used their Type C in my previous Motorcycle and the price was reasonable.
Before the pad change, I had no particular complaints with Daytona's Golden PadΧ, which has a good reputation, but after the change, it became easier to understand that the Fork sinks as much as the Lever is pulled, or the load is placed on the Front.
I can't put it into words well, but I am satisfied that it has become more Controllable or the way I like it to work.
I haven't used a Jicoo pad in 10 years, but it really brought back memories! It brought back my memories. I felt really nostalgic, though the speed range is different from that of Type C.
As for the effectiveness of the brake, it is difficult to say that this pad is better, since it depends on several factors such as MASTER, disc, caliper, pad, and the speed range at which the vehicle is traveling.
When I opened the product Page to write an imprement, it shows that it is no longer for sale, but I hope it is a mistake because it is my favorite Pad.
View detail
Fits: APRILIA RSV4 APRC SE, APRILIA RSV4 Factory, APRILIA RSV4 Factory APRC ABS, APRILIA RSV4 R, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA TUONO V4 RR, APRILIA TUONO V4 RR Factory, BENELLI TNT 1130 R, bimota BB3, bimota DB8 Oronero, bimota Impeto, bimota Tesi 3D Race Cafe, BMW HP2 Sport 1200, BMW HP4 Race, DUCATI 1098, DUCATI 1098 S, DUCATI 1199 Panigale Superleggera, DUCATI 1299 Panigale R Final Edition
I purchased Repeat
I was dissatisfied with the performance of the OEMBrake on my GSX-S1000, so I replaced the pad with a ZCOO. This improved the brake performance considerably, so I decided to purchase Repeat this time. It works well, has high control, and is about half the price of Metallica, so the cost performance is good. I replaced the Disc Rotor this time and decided to replace the pad as well, but there is still quite a bit of remaining capacity, so it seems to be highly durable. View detail
Fits: DUCATI MULTISTRADA 1200 S TOURING, DUCATI MULTISTRADA 1260 S TOURING, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI XDIAVEL S, MV AGUSTA F4 CORSA CORTA, SUZUKI KATANA, APRILIA RSV4, APRILIA RSV4 FACTORY, APRILIA RSV4 ABS, APRILIA RSV4 APRC, APRILIA RSV4 SBK RACING, APRILIA RSV4 R, APRILIA RSV4 RR, BMW HP2 SPORT, BMW S1000 RR, BMW HP4, bimota BB3, bimota DB7, bimota DB8, DUCATI 848 EVO
For Brake heat protection
There is a method of attaching ducts to the brake to prevent heat buildup in circuit driving,
This is placed between the Brake Pads and Piston to dissipate heat, and the Piston (from Fluid) The product is designed to reduce the transfer of heat to the
There is no change in brake touch, and lever entry during circuit driving has been reduced.
It's obvious, but the drawback is that it gets in the way when Caliper is attached.
I would recommend it, but the price is too high...
View detail
Fits: SUZUKI HAYABUSA1340 , MV AGUSTA F3 800, BMW HP4 SPORT (13-) Brembo radial mount cast monoblock, BMW HP2 SPORT (08-) Brembo Radial Mount Cast Monoblock, SUZUKI GSX-R 1000 , MV AGUSTA F3, MV AGUSTA BRUTALE1090RR, bimota DB7, bimota DB7 , TRIUMPH Daytona 675 R, SUZUKI GSX1300R Hayabusa (Hayabusa), SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, MV AGUSTA F4 RR1078, MV AGUSTA BRUTALE1078RR, KTM 990 SMR, KTM 690DUKE R, KTM 1290 SUPER DUKE R, KTM 1190 RC8R
Fairly easy to Control.
It is very easy to Control from Touch to gripped.
I can't go back to OEMPad.
View detail
![Clutch fluidReserver cap MV AGUSTA - S-Birdk [Clutch fluid reservoir cap MV Agusta - STREAKS]](https://img.webike-cdn.net/catalogue/images/37768/TF890B_TF890G_TF890R_TF890S_TS.jpg)
Fits: MV AGUSTA STRADALE 800, MV AGUSTA TURISMO VELOCE 800, MV AGUSTA F4 RR1078, MV AGUSTA F4-750, MV AGUSTA F4 RR, MV AGUSTA F4 312 R 07-08, MV AGUSTA F4 1000S, MV AGUSTA F4 1000R, MV AGUSTA F4 1000 00-06, MV AGUSTA F4 1000 13-15, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE990R, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1078RR, MV AGUSTA BRUTALE R989, MV AGUSTA BRUTALE 910R, MV AGUSTA BRUTALE 910S
AGUSTA
I am happy that the delivery was so fast. Now you can use the Quantity:Pair (for Left and Right) We are all here. View detail
![FrontBrake Fluid Reserver Cap Mv AGUSTA - Touch[Front brake fluid reservoir cap Mv Agusta - Touch]](https://img.webike-cdn.net/catalogue/images/37768/TF509B_TF509G_TF509R_TF509S_TS.jpg)
Fits: MV AGUSTA F4 RR1078, MV AGUSTA F4 1000R, MV AGUSTA RIVALE800, MV AGUSTA DRAGSTER 800RR, MV AGUSTA F4 312 R 07-08, MV AGUSTA F4 1000 13-15, MV AGUSTA TURISMO VELOCE 800, MV AGUSTA STRADALE 800, MV AGUSTA BRUTALE990R, MV AGUSTA DRAGSTER 800, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE1078RR, MV AGUSTA BRUTALE R989, MV AGUSTA BRUTALE 910R, MV AGUSTA F4 1000R
AGUSTA
The installation went easily and I am satisfied with the quality of the product. View detail
Fits: APRILIA RSV4 APRC SE, APRILIA RSV4 Factory, APRILIA RSV4 Factory APRC ABS, APRILIA RSV4 R, APRILIA RSV4 R APRC ABS, APRILIA RSV4 RF, APRILIA RSV4 RR, APRILIA TUONO V4 RR, APRILIA TUONO V4 RR Factory, BENELLI TNT 1130 R, bimota BB3, bimota DB8 Oronero, bimota Impeto, bimota Tesi 3D Race Cafe, BMW HP2 Sport 1200, BMW HP4 Race, DUCATI 1098, DUCATI 1098 S, DUCATI 1199 Panigale Superleggera, DUCATI 1299 Panigale R Final Edition
Great!
It is used only for Circuit runs.
It is easy to control, and only the amount you hold the lever will be effective, so you can use it without worry.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
It might be a good idea to replace it with a bar end mirror.
I think the price is a little high.
It is necessary to seal the OEM mirror hall to replace the bar end mirror, but I think it is also necessary to fix the MONSTER S2 Fluid Tank with a mirror hall.
Material:Because it is aluminum, there is a high likelihood that it will be tightened with too much force or licked during removal.
This is the second time I have purchased this product, but it was licked on removal and needed to be replaced.
A little It will be dressed up around the Handlebar.
I have purchased Red before and this time I chose Red again.
View detail
Fits: SUZUKI GSX-R1000, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE RR, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE CORSE, MV AGUSTA 1078 F4RR, MV AGUSTA 1078 F4RR312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4 LH44, MV AGUSTA 1078 F4R312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4RC, MV AGUSTA 1000 F4 CC, MV AGUSTA 1000 F4R, MV AGUSTA 1000 F4, MV AGUSTA 1000 RUSH, MV AGUSTA 800 SUPER VEIOCE, MV AGUSTA 1000 BRUTALE RR
Works well and stops well.
Since the brake master cylinder was changed to GALE SPEED's VRC, I changed it back to this one.
It works very well from the beginning.
I don't know if it works well with Master Cylinder or not, but it can be used softly or hard at will.
It is difficult to control brakes that do not work well, but it is easy to adjust brakes that work well and make them work.
It just squeaks a little….
I'm not sure about the durability yet, so I'll give it 3 stars.
View detail
Fits: SUZUKI GSX-R1000, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE RR, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE CORSE, MV AGUSTA 1078 F4RR, MV AGUSTA 1078 F4RR312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4 LH44, MV AGUSTA 1078 F4R312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4RC, MV AGUSTA 1000 F4 CC, MV AGUSTA 1000 F4R, MV AGUSTA 1000 F4, MV AGUSTA 1000 RUSH, MV AGUSTA 800 SUPER VEIOCE, MV AGUSTA 1000 BRUTALE RR
suspension of use
I used to use it on my H2SXSE+ OEM brembo, but now I have stopped using it because the brake is so strong that it is hard to control and the squeal is just too much, even after chamfering and applying more Grease, it is not cured. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1300R HAYABUSA, APRILIA RSV-4R, APRILIA RSV-4R APRC, APRILIA RSV-4 FACTORY, bimota 3D 800 TESI, bimota 1200 IMPETO, DUCATI 848 EVO, DUCATI 998 PANIGALE V4R, DUCATI D16RR 990 DESMOSEDICI RR, DUCATI 1098, DUCATI 1098S, DUCATI 1098R, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, DUCATI 1098 STREETFIGHTER S, DUCATI 1100 HYPERMOTARD, DUCATI 1100 HYPERMOTARD EVO SP
Same ect. as bremboZ-04 and Fee Ring
I used bremboZ-04 in a hurry because it could not be delivered in time for the start of the Motegi Championship. (2017) There was a little change in Stroke in the middle of the Race, but it can be handled by the Remote adjuster. The effect and fee ring is similar to bremboZ-04Pad.
Plate warpage after use was also quite small. I put two pieces back-to-back when new, and it looked as if a slight reverse warp was given in anticipation of this. I like that the box is gorgeous. This box makes me want to make a guitar Effector.
View detail
Fits: SUZUKI GSX-R1000, DUCATI 1098R BAYLISS LE, DUCATI 1098 STREETFIGHTER, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE RR, MV AGUSTA 1090 BRUTALE RR, MV AGUSTA 1078 BRUTALE CORSE, MV AGUSTA 1078 F4RR, MV AGUSTA 1078 F4RR312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4 LH44, MV AGUSTA 1078 F4R312, MV AGUSTA 1000 F4RR, MV AGUSTA 1000 F4RC, MV AGUSTA 1000 F4 CC, MV AGUSTA 1000 F4R, MV AGUSTA 1000 F4, MV AGUSTA 1000 RUSH, MV AGUSTA 800 SUPER VEIOCE, MV AGUSTA 1000 BRUTALE RR
Is not it okay?
The Touch and the effect are good.
There is quite a bit of squeaking and beeping just before stopping.
Brake dust is also slightly more.
I heard that the way of thinking is different between Japan and other countries where efficacy is a priority, so it can't be helped.
I just replaced it so I don't know how durable it is.
View detail