Reviews
Fits: HONDA CX500, HONDA CX400, HONDA CM400, HONDA CD250, HONDA CBX125, HONDA CBX125, HONDA CBR750, HONDA CBR600F, HONDA CBR400F, HONDA CBR150R, HONDA CBR125, HONDA CBF600, HONDA CB350, HONDA CB250RS, SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80
Installation Notes
End cap may be a little Slant in structure.
The dimensions of the Throttle side are too Exactly, so a lot of force is needed to insert it.
Considering the strength of each part, I think you need to insert it slowly with PRESS.
Also, if you insert it to the root, it will interfere with the Handlebar in relation to the Switch box.
It is necessary to measure the Grip depth, etc. well before inserting it (because it is probably impossible to pull it out).
Considering the price, I think it looks good after installation.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
The Exhaust System is on fire.
If you have replaced the ignition system with NGK Racing cable, then the plug should be Windshield IRIDIUM.
The Exhaust System is on fire.
If it is a normal vehicle, Windshield IRIDIUM does not need to be replaced so quickly, so it may be just right for motorcycles with poor maintainability.
View detail
Fits: HONDA VTR250, HONDA HORNET250, HONDA CB400T CB250T, HONDA CB400TII CB400T
Used for VTR250
[How is it used?
The VTR250 that I prepared to start Gymkhana.
I changed the engine oil and the oil filter before I started to run the car because it was too cheap and battered car that I got on Yahoo!
Since the vehicle is not yet assembled, I'm giving it a 3 for now for durability.
Still, it's KIJIMA, and you can trust them〜.
Was the one you received as per Image?
As shown in the image, a complete set of oil seals is required when replacing the Oil Filter.
Was the installation difficult?
You can tell which Seal goes with which by opening it and staring at it.
After reassembling and before tightening, be careful that the seal does not stick out and bite.
How was your experience with it?
As I mentioned above, I haven't gotten it running yet because it doesn't have the security parts on it.
But it's not peeing on the floor, so I guess it's Large durable.
[Was there anything that disappointed you?
There is not. Even if there is, it is the price which can be paid if you endure to buy one MONSTER S2.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
→ Items to be purchased together
Prepare the Oil Filter together.
https://www.webike.net/sd/1907693/
View detail
Fits: KAWASAKI Z400 (KZ), SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Cheap, comfy and durable
Does what it needs to do. I mean it's cheap and holds my hands just fine like the stock waffle grips. If you have a handguard, you have to cut it though. It isn't something like a proper enduro grip with removable covers and all. But for the price, this is hard to beat. Maybe I'll get another pair in the near future. +Cheap +Easy to install +Grips fine +Doesn't slide -You have to cut it for the hand guards View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Used to make up the shortfall
When I replaced the Stem for KMX200 in KMX125 which I bought in Yahoo!
For some reason, I didn't have enough steel balls for Stem bearing, so I checked the size from Parts List and bought them.
So far I have no complaints about the sphericity or hardness.
If you have a Kawasaki, you can check the size of the Stem sphere from the Parts List.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
I like the way it's biting.
Used for XELVIS.
Universalism is high because of the general inner diameter.
The design is not often seen, but it is thick and soft and comfortable to grip.
It's also non-slip, so you won't get tired even if you hold it for a long time.
If you like the design, you should buy it.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
If you've beefed up your ignition system, don't hesitate to replace it.
Since the AS Votani was reinforced with Coil, I thought it would generate stronger sparks, so I replaced it. Actually, before and after the replacement, the engine performance was improved a little bit. As for the running performance, I did not notice any change.
I highly recommend Carburetor Vehicles as well, if you are changing the ignition system. Now I just need them to work a little harder on durability and Cost!
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
I wasn't expecting it, so I'm very happy with it!
The final XG250 TRICKER (about 1500 km) mounted on
While using the Plug of Standard Equipment, there was a possibility of stalling when Axel was slightly opened at the time of starting or just before stopping, but there was no stalling after installing this Plug.
I'm very happy with this effect for an inexpensive part that wasn't installed to counter Stall.
Be sure to check the heat value of the last model and the earlier models when you buy them as they have different heat values!
View detail
Fits: KAWASAKI Z400 (KZ), SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Not much except for Design.
"It got twisted during installation.
The Grip itself is thin and the GripPattern feels good in the hand, but it doesn't absorb vibrations very well, and because it's thin, it seems to twist easily.
I don't recommend it for people who have to hold the Grip for a long time or do the grip removal by themselves.
"
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
Grip change of DT50
The OEM Grip is tattered and has been replaced
Be careful not to move the Axel side too close to the Center, as it won't return!
On Off cars, the Grip is uneven, so it's a bit slippery, but I like it.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500, HONDA CX500, HONDA CX400
Comfortable grips...simple and nice. Good View detail
Fits: HONDA CBX400F, HONDA CBX400F, HONDA CB650, HONDA CB650, YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA TZR50R, YAMAHA TZR50R, YAMAHA TZR50, YAMAHA TZR125, YAMAHA TW200, YAMAHA TW200, YAMAHA TW200, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400, YAMAHA SRX400
Cheap and great.
This is a 1/4 size steel ball.
It is used for the Stem bearing (above) of TS125RK and the Stem bearing of KLE250.
The price is about 2/5 of the OEM product. 50 units for 2 units, where it costs 2,500 yen, but it only costs 1,000 yen.
It's a quality product.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
Used in commuting vehicles
I used it for my daily commuter vehicle.
I drove it for a few miles after installing it, but it was able to maintain stable acceleration and fuel economy. Windshield IRIDIUM is more expensive than a regular plug, but I think the end result is a higher cosmetic value in terms of replacement time and improved fuel economy.
View detail
Fits: HONDA CB500F, bimota db-1SR, bimota db-1S, bimota db-1, bimota BB1 BIPOST, bimota BB1 SUPER MONO, YAMAHA MAJESTY250 SV, YAMAHA MAJESTY250/ABS, YAMAHA BRONCOST225, YAMAHA SEROW225 WE, YAMAHA SEROW225 WE, YAMAHA SEROW225 W, YAMAHA SEROW225S, YAMAHA SEROW225, YAMAHA SEROW225, YAMAHA YZF1000 THUNDER ACE, YAMAHA YZF1000R, YAMAHA YFM400FWA, YAMAHA YFM350X, YAMAHA YFM350X
I always install this one
I've been buying new bikes for 46 years now, and recently I've been buying this bike all the time
It is installed
[Was there anything that disappointed you?
Not at all In fact, it doesn't always disappoint
Ignite powerfully with one shot of Cell Once you use it, you cannot return to NORMAL
Do you have any wishes or improvements you would like to make for the Manufacturer?
I hope they will continue to make good, inexpensive products forever
[Do you have any products to compare it to?
There is none
What made you decide to buy?
searching for SEROW 2018 or later MODEL on webike does not hit
Read the Instruction Manual to check the current part number and check the NGK's On Site
I have found a compatible product
How was your experience with it?
It is a reliable brand product with good starting and blowing ability that does not always disappoint
Was the installation difficult?
It is difficult to remove without OEM tools
【Please tell me the installation point and hang】
You can turn it to the point where it is tightened by hand as well as a normal plug and then use the special wrench
Installation without overtightening
[Was the Instruction Manual easy to understand?
There is none
[Included Parts:were they on?
Not particularly
[Others]
If you compare it to the OEM products, you will be surprised at the overwhelming increase in performance
View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
It is Repeat
The same Grip was worn out for Large, so I replaced it
This Grip is number one for me
I love the design, the feel and the thickness
View detail
Fits: KAWASAKI Z400 (KZ), SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Great pens for your money!
Repair and restoration of my Honda continues! So another order of mine arrived. What can I say for that kind of money, a product of very good quality. Decent packaging, it looks very good, the old ones were immediately thrown away, installed without problems. So I recommend buying. I hope they pass for a long time)) Repair and restoration of my Honda is ongoing! So my next order arrived. What can I say for such money a product of very good quality. Decent packaging, it looks very good, immediately threw out the old ones, installed without problems. So I recommend to buy. I hope it takes a long time)) translated by google translate View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
The Grip is always this one
When I change bikes, I almost always change to this Grip It is my favorite item There is still Quantity in the stock case:1 Set is kept
■ Design
Overall The Grip of yesteryear not "Modern I have an impression of this If you use it on an old car, you will feel a little uncomfortable One point colors are also available You can choose one and match it with the color of your car
Impressions
It has just the right amount of softness and a slightly thicker grip Thanks to the grooves and softness, I have the impression of shutting out vibrations with just the right amount of salt and hand It also reduces the numbness of the Also, it has good transverse grooves, so it's not slippery even when driving in the rain, which gives you a sense of security
Grip has to be slim! It's not suitable for people who say "I'm not sure I'm a good fit," but it's reasonably priced, so it's a grip you should try at least once
The only weakness would be the durability It's a soft Grip, so it will wear out or shine on the rubber after a year or so if you use it for commuting It can come out The price is so low, though, that I think it's fine to replace it
View detail
Fits: KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN DRIFTER400, HONDA NSR250SP, HONDA NSR250SE, HONDA NSR250SE, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NS50F, HONDA NS250, HONDA NS50F, SUZUKI 250SB, SUZUKI GSX250FX, YAMAHA FZ400, YAMAHA FZ400, KAWASAKI VULCAN800
It was used for PD22
PD22 that Minimoto is handling (PTG22) Used for
It works fine
Posh and others seem to be KEIHIN OEMs, but this one seems to be different
There is no KEIHIN engraving on it, but it looks and feels very accurate and has no problems
View detail
Fits: HONDA MT250, KAWASAKI Z650SR, HONDA CB250T, HONDA CB350, HONDA CB360T, HONDA CB500T, HONDA CJ250T, HONDA MT125, KAWASAKI 650RS, KAWASAKI 650W1, KAWASAKI 650W1S, KAWASAKI 650W1SA, KAWASAKI 650W2SS, KAWASAKI 650W2TT, KAWASAKI AR50II, KAWASAKI KL250, KAWASAKI KLX250, KAWASAKI Z200, KAWASAKI Z250FS/LTD, KAWASAKI Z400
It's helpful because there are various thermal values in the same shape plug
The heat value of the OEM Plug was 8 Because of the age of the motorcycle, Carbon has accumulated around the electrodes and electrodes of the plug I've put away the Engine
It was the first time in two years that I replaced the Plug Because the heat value was lowered, I think that I will see the self-cleaning state of the plug The fireplace is now in place and the Engine's startability has improved
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500, HONDA CX500, HONDA CX400
It's a great grip!
I installed it on the moped TL125
The throttle pipe is short
It needs to be replaced and installed with a longer one
But the longer it is, the more freedom of grip it gives me
View detail