Reviews
Fits: YAMAHA ZEAL, YAMAHA YZF600R, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA XSR700, YAMAHA XS250, YAMAHA XJ6N, YAMAHA XJ6
dealing with peeing
I am relieved that the leak is gone and will purchase a spare. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: YAMAHA YZF-R3, KAWASAKI W800, KAWASAKI Ninja250, KAWASAKI Z650, KAWASAKI ZX-10RR, KAWASAKI Z900RS, SUZUKI V-STROM250, SUZUKI Zixer 250, SUZUKI SV650X, SUZUKI GSX-S750, SUZUKI Hayabusa, YAMAHA YZF-R25, YAMAHA SR400, YAMAHA XSR700, YAMAHA Tenere700, YAMAHA TRACER900, HONDA CRF250 RALLY, HONDA CBR250RRR, HONDA VFR800F, HONDA CB1100
It was a little small for V85TT.
I was looking for something that I could use on my YamahaTREACER900, but it was too small for my V85TT.
The handlebar width, Mirror to Mirror, was pulled down and the total length was shortened by the width of the handlebar. Especially, MOTO GUZZIOEM's Pannier case is large, and when it is attached, the width is almost the same as the width of the Handlebar, about 90cm wide.
The material is firm like Tent fabric, and I think it can be used enough if you can find a way to fasten Strapetc.
The reason I gave it an All 5 in the detailed evaluation is not the fault of the Manufacturer, but because I made a spur-of-the-moment purchase of my own. Do not hesitate to contact me for further information (Lol)
View detail
It got easier to ride
The high seat has better leg room than the OEMSeat because the SIDE has been made slimmer. View detail
Depends on the shape of the oil pan
I used it for Engine Drain, not for Motorcycle, and I confirmed that the black iron powder was caught in the magnet when I changed the oil, but I think the amount of caught iron powder depends on the shape of each engine oil pan. Incidentally, the oil pan shape of ZX-12R is very difficult to catch the iron powder, so be careful when the amount of iron powder is large. View detail
Fits: YAMAHA FJ-09, YAMAHA FZ-09, YAMAHA MT-07 Tracer, YAMAHA MT-09 Street Ralley, YAMAHA MT-09 Tracer, YAMAHA MT-09, YAMAHA Tenere 700 Rally, YAMAHA Tenere 700 World Raid, YAMAHA Tenere 700, YAMAHA Tenere 700, YAMAHA Tracer 700, YAMAHA Tracer 700, YAMAHA Tracer 900 GT, YAMAHA Tracer 900, YAMAHA Tracer 900, YAMAHA XSR 900
The texture is good
I bought it as BonsaiParts.
I am satisfied with the quality and the price on that point.
Since it is directly attached to the Swing Arm via a chain adjuster bolt, it is somewhat troublesome to loosen the tension of the chain.
Instead, it does not fall back when tightening the Axle, but it is my personal opinion that Demerit is more large than Merit in this respect.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Fits: YAMAHA BOLT, YAMAHA FJR1300, SUZUKI BANDIT1250F, SUZUKI DL1000 V-STROM1000, SUZUKI BANDIT1250, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI KATANA(KATANA), SUZUKI KATANA(KATANA), SUZUKI HAYABUSA, SUZUKI HAYABUSA, SUZUKI GSX1400, SUZUKI GSX-S1000F, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600, SUZUKI GSX-R600
For dress-up purposes rather than performance.
I bought this to add a little more Impact since I replaced the OEM Rotor with Arashi's Wave rotor.
I contacted Arashi and they replied that I can use the same 13.85 as the OEM. However, the OEMRotor is Pin?Quantity:It is a little bit extra expense because I need 9pcs. (Lol) 。
Since this is an important safety component when it comes to replacement work, we left it to Motorcycle Shop.
Without the wave washer, it would function as full floating, but since I ride to work every day, I decided to make it semi-floating to reduce wear and tear.
Since the inner rotor is Gold, the Red pin is ImpactLarge.
Since few people have done this much work on their CBRs, it is 120% self-satisfaction.
How much Anodized fading is left to do? I guess.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail
Fits: HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600FS, HONDA CBR600F, HONDA CBR600F, HONDA CBR400R, HONDA CBR600F4i, HONDA CBR250RR, HONDA CBR400R, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE, HONDA CB900F, HONDA CB750, HONDA CB650F, HONDA CB650R, HONDA CB400SF
Oil Filter
I purchased the Oil Filter and put it on my mt09, it is a good and stable product. View detail
![[CAMEL]1FingerClutch](https://img.webike-cdn.net/catalogue/images/120348/CAP-T7-1FC_1_TS.jpg)
It makes city driving easier,
I installed this on a 2022 MT07. If you have the tools, installation is no problem.
There are three holes, but I used the middle one at first, but since I also drive an Off car, one or two fingers can be used for Clutch operation.
It's a habit, so it's a little bit of a drag because it hits your fingers and you can't pull it all the way to the end, so it feels like a little bit of a drag.
If you are the kind of person who operates Clutch with 4 sticks to pull it to the end, you can use it.
I don't think any hole is a problem. Even at the very front, it is lighter than NORMAL, so it works.
Also, it is better to use the included Ring because the Snap ring spreads when you take it off,
The guide nut should also be screw locked if possible to prevent loosening due to vibration,
If GuideNut is eliminated, Clutch will not be able to be cut.
View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Ideal for mounting Pipe Handlebar
If you are installing a RAM Mount on a Pipe Handlebar body, this M8BaseBolt is the perfect replacement for the Handlebar Clamp Bolt.
There is no need to worry about mounting gapping due to vibration. The M8BaseBolt can be mounted on a handlebar clamp, so there is no need to worry about space limitations.
View detail
Fits: YAMAHA T-MAX 530SX, YAMAHA T-MAX 560, YAMAHA T-MAX 560SX, YAMAHA T-MAX 560DX, YAMAHA T-MAX 560MAX TECH, YAMAHA T-MAX 530DX, YAMAHA XT1200ZE SUPER TENERE, YAMAHA T-MAX 530, YAMAHA T-MAX 500, YAMAHA XT1200Z SUPER TENERE, YAMAHA XSR900, YAMAHA XT660Z TENERE, YAMAHA XSR700 XTRIBUTE, YAMAHA XJ6 DIVERSION, YAMAHA XJ6 DIVERSION F, YAMAHA XJR1300, YAMAHA XSR700, YAMAHA XJ6, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER
Puig Brake Lever Adapter for Yamaha MT09 Tracer
So because I have never ordered this brand before, I was a little unsure of how this would work having to buy an adapter for each of the brake and clutch levers sides I had in my basket. Not to worry, it turns out that Puig have had a great idea and manufacture the same lever and then you just buy the appropriate adapter for your model and away you go. When you think about it, this is a really good manufacturing practice. Why make a ton of different levers for each make and model of bike when you can just make one lever and then the adapters. Why other manufacturers have not done this is pretty weird, it's just a simple idea to put into practice.. Anyway, finding the correct brake lever adapter was fairly straight forward. I cross referenced on Puig website and this came up. This also fits a lot of other Yamaha's which is also a plus point. For this adapter and the lever to fit was a great deal. All arrived in one box in 5 days to my door. The box was well padded and nothing got any damage in transit. Webike are professional at packing by the way. The brake adapter is a gorgeous glossy black colour of anodising. The finish is nice and even and no patchy, light or dark spots as you often get from some other manufacturers who use poor anodising processes. The adapter fitted easily with the brake lever. Everything done in about half an hour. Very pleased with my purchase, thanks Webike. View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
I'm replacing it anyway.
[How is it used?
I replaced the oil filter at the same time when I replaced the oil in the ZX-7R. I use a cheap oil filter because I don't care what kind of oil filter I use.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the filter with an oil filter wrench and tighten the new filter with a hand wearing a rubber glove.
How was your experience with it?
I don't feel anything in particular, I would be happy if you Catch Garbageetc.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I've touched a few vehicles with stupidly tightened Oil Filters, and I always thought, Torque check it out.
In the worst case, if it does not come off, stick a penetrating driver in and turn it to remove it.
View detail
It can stand safely even on slopes and undulations.
As shown in the Title and Product Spec., the STAND will be shorter, so the length will be appropriate for the lowered vehicle body, and it will be more stable when the vehicle is stopped.
It would be great if Short Stand could be incorporated into LowdownPackage and released by Manufacturer.
Naturally, the ground contact area is the same as OEM etc., so it will be buried in soft ground such as soil at camping sites or on forest roads.
Since the company manufactures STANDExtender, it would be great if there is an Extender that fits this Kick Stand Tip.
It is not a bad thing and can be recommended for those who have low LINKs to lower.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA XJR1300, YAMAHA MT-25, YAMAHA MT-25
Purchased for ZZr250
The image of the product looked Black, but the actual product was Silver. View detail
Fits: YAMAHA MT-07, YAMAHA MT-07 Tracer, YAMAHA XSR700, YAMAHA Tenere 700
GBRacing Water Pump Cover for MT07 2017
Time for some more protection for the MT07 2017 model. I was planning on getting all the covers for this from Webike but they just have the water pump cover and the water pipe cover. It's fine, I had sourced the other 2 covers for the MT07 from elsewhere which was not a problem. This cover, the water pump cover is a great part for the bike. It not only protects the water pump in the even to of an accident but looks really cool too. The part numbers were not hard to find and I just searched for GBRacing on Webike and followed the paths to the MT07. SImple. The price was really good value and as good as I could source locally. This was combined with a few other parts in my order so to keep the total shipping cost down and spread over the entire order. I used EMS for this order and the package arrived with me in 5 days. Upon receipt, the covers came in their own boxes from GBRacing. The water pump cover is a really smooth and well finished part. It has a satin black sheen to it which is very tactile, just like all the other GBRacing covers I have purchased. With all the GBRacing covers, they have their log and silvering lettering which is raised on each cover. True quality. I actually did find out what the composite is for these covers and it is: high-impact composite material made from 60% Long Glass Fibered Nylon. I have to say, they really do stand up to some beatings as I have had these on most of my bikes. Fitting the covers was super easy and it is just removing some of the stock bolts, adding the cover and using the bolts GBRacing provide for the full fitment to be complete. All the bolt holes were aligned correctly before fitting and all the bolts and instructions etc were included in the packages. Super simple to follow. Very very pleased with the final result and now I can rest easier that in the event of an off, the water pump woll be as protected as it could be. Thank you Webike, happy customer. View detail
Fits: YAMAHA MT-07, YAMAHA MT-07 Tracer, YAMAHA XSR700, YAMAHA Tenere 700
GBRacing Water Pipe Cover for MT07 2017
I already added the water pump cover for the MT07 2017 model I purchased from Webike and the other 2 covers I purchased from elsewhere and this was the last part to add to complete the protection job I wanted. This cover, the water pipe cover is a great part for the bike. It not only protects the water pipe in the even to of an accident but looks really cool too. The part numbers were not hard to find and I just searched for GBRacing on Webike and followed the paths to the MT07. SImple. The price was really good value and as good as I could source locally. This was combined with a few other parts in my order so to keep the total shipping cost down and spread over the entire order. I used EMS for this order and the package arrived with me in 5 days. Upon receipt, the covers came in their own boxes from GBRacing. The water pipe cover is a really smooth and well finished part. It has a satin black sheen to it which is very tactile, just like all the other GBRacing covers I have purchased. With all the GBRacing covers, they have their log and silvering lettering which is raised on each cover. True quality. I actually did find out what the composite is for these covers and it is: high-impact composite material made from 60% Long Glass Fibered Nylon. I have to say, they really do stand up to some beatings as I have had these on most of my bikes. Fitting the covers was super easy and it is just removing some of the stock bolts, adding the cover and using the bolts GBRacing provide for the full fitment to be complete. All the bolt holes were aligned correctly before fitting and all the bolts and instructions etc were included in the packages. Super simple to follow. Very very pleased with the final result and now I can rest easier that in the event of an off, the water pump woll be as protected as it could be. Thank you Webike, happy customer. View detail
Fits: YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA MT-09, YAMAHA MT-09SP, YAMAHA MT-10, YAMAHA MT-10SP, YAMAHA NIKENGT, YAMAHA TDM900, YAMAHA XJ6, YAMAHA XJR1300C, YAMAHA XSR900, YAMAHA XT660Z TENERE, YAMAHA FZ6R, YAMAHA MT-07, YAMAHA FZ-09, YAMAHA FZ-07
Improved appearance and feel
It looks much better and the adjustments can be set more precisely, which improves the feel of the operation. However, the grip is a bit more angular than the OEM, which may differ for different tastes. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000 R, SUZUKI GSX-R1000 R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S1000 F, SUZUKI KATANA, YAMAHA FZ-07, YAMAHA FZ-09, YAMAHA FZ1, YAMAHA FZ1 N, YAMAHA FZ1 S, YAMAHA FZ6, YAMAHA FZ6 FAZER, YAMAHA FZ6 R, YAMAHA FZ8, YAMAHA FZ8 FAZER, YAMAHA FZ8 N
Improved appearance and feel of operation
Instruction Manual is included, but it is not very detailed, but it is not that difficult.
It looks better and the adjustments can be set more precisely, improving the feel of the operation.
View detail