Reviews
Fits: HONDA 400X, HONDA CBR650R, HONDA CB650R, HONDA CBR650F, HONDA CBR650F, HONDA CB650F, HONDA CB650F, HONDA REBLE500, HONDA REBLE500, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB250F, HONDA CB250F, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R
It's a little better, but ….
I bought a new GSX250R with both front and rear brake pads because the brake was not working well. After replacing the brake pads, the brake works better than OEM, but I still feel that the braking force is not enough. Personally, I feel that the GSX250R works better on the rear than on the front, so I think that the choice of pads for the rear is even more important. My impression after changing to this KITACO pad is that it works better than the OEM pad, but it is not controllable, and I feel it is difficult to use in winding. When the color changes from Blue to Yellow at intersections, even if there is a 30-meter margin, it will go over the stop line. My personal impression is that I made a mistake in choosing this Pad. View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Adding a little something to the look and feel
A product that unifies the Custom.
Replace the Engine with the one you are using after it cools down.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
Long life feeling
It works considerably better than NORMAL.
If you're going to go out of your way to buy OEM, this is the way to go.
View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
work well
OEM replacement for GB250
I would like to see this level of effectiveness in de Fault as the OEM is hardly effective.
View detail
Fits: HONDA CBR250R (2011-), HONDA CB250F, HONDA CB400F (2013-), HONDA 400X, HONDA CBR400, HONDA GROM, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Rattling occurred on ours.
Rattling occurred on ours.
I looked for a washer, but even the slightest difference causes the problem, so I have to put up with it without an ultra-thin washer.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CBR400R, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA Monkey125, HONDA NS-1, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA Monkey125, HONDA NS-1, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Adjust adjustment is good
Being able to adjust the length would be very nice. View detail
Fits: HONDA VFR800X Cross Runner, HONDA CB250F, HONDA CB400F (2013-), HONDA CBR250R, HONDA CBR400R, HONDA CB500F, HONDA CBR500R, HONDA CB500F, HONDA CBR500R
CBR250RR.
[How is it used?
Used for CBR250RR MC51
[What Image did you receive?
Carbon Style and WingLogo are Accent and good
Was the installation difficult?
Difficult to center the Tank.
Attachment by eye measurement
It is recommended to check the contact area in advance and affix it.
How was your experience with it?
Satisfied with both dress-up and anti-wound.
[When to use Recommendation.
Immediately after delivery. Wound prevention from the beginning.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Texture is good!
I was worried about Titaniumium gold, but decided on Black so that it would not stand out too much.
As expected from MORIWAKI, it is well made.
Just … I would appreciate it if it was a little cheaper.
View detail
Fits: KAWASAKI ZXR750, KAWASAKI ER-6n, KAWASAKI XANTHUS, HONDA MBX50, HONDA MBX50F, HONDA CB400F, HONDA Rebel 1100, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA RC51, HONDA CBR1000ST, HONDA CBR1000SP, HONDA CBR1000S2, HONDA CBR1000S1, HONDA CBR1000RR SP2, HONDA CBR1000RR SP, HONDA CBR1000RR Fireblade, HONDA CRM50, HONDA Dio 110, HONDA Varadero 125
Excellent Quality Oil Filler Cap
The part itself is very well made. The packaging is very Japanesque in style. Made me miss Japan even more if your familiar how items/food/gifts are package. Amazing how such a small part can make a difference in the look of the engine. Thank you MORIWAKI engineering team and Web Bike Japan. The package arrived super fast through USPS/EMS. - USA submission View detail
![Brake Pad - ROAD [CC] Compound](https://img.webike-cdn.net/catalogue/images/114748/Road-Carbon_Ceramico_TS.jpg)
Fits: HONDA CB250F, HONDA CB250F, HONDA CB650R, HONDA CB650R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR300R, HONDA CBR650R, HONDA CBR650R, HONDA Rebel1100 DCT, HONDA Rebel1100, HONDA VTR250, HONDA X-ADV, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z900, SUZUKI DL250 V-STROM250, SUZUKI DL250 V-STROM250, SUZUKI GSR250, SUZUKI GSR250F
No complaints
Replacement was easy. I don't know about durability, but it works well enough. No problem at all for city driving. View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X, HONDA NC750X LD, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
Good cost performance.
I used to use Vesla ZDCT.
I'd be driving at the same pace as SS and 2Storage P on the mountain roads.
It ends up costing about 3000?each time, so I tried this one.
Compared to the Vesra, the initial braking force at the beginning of the grip is a little inferior, but after the grip is tightened, the braking force is about the same level.
In terms of controllability around the area where ABS is activated, there is almost no difference between the Large and the Low. The difference was about the same in the control performance around the area where ABS is activated.
Durability is quite good. It is currently about 4,000mm and still has more than 1,000mm to go.
I will continue to use this one from now on because it wins hands down in terms of cost performance.
View detail
Fits: HONDA MSX125 (GROM), DUCATI 1199Panigale, DUCATI 848, DUCATI 848EVO, DUCATI 899Panigale, DUCATI DIAVEL, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821, DUCATI MONSTER 1200, DUCATI MONSTER 821, DUCATI MONSTER1100EVO, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MULTISTRADA 1200, HONDA 400X, HONDA CB1100, HONDA CB1300 SF, HONDA CB250F, HONDA CB400F (2013-), HONDA CB400SF
Is quality declining?
It can be opened and closed with a tool, which is easier than opening an OEM Knob with monstrous force.
Wiring can be done and Design is good.
I have used several of them and had no problems, but I guess it was around the time the company name was changed to SPEEDRA.
The hexagonal hole of the one I received was rattling in BALI, so I requested a replacement and was refused with Spec.
It wasn't like that before...
View detail
Fits: HONDA Forza(MF10), HONDA Forza(MF10), HONDA glom, KAWASAKI ZX-9R, KAWASAKI ZX-RBF, KAWASAKI ZX-RAFA, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-14R, KAWASAKI Z125 Pro, YAMAHA YZF-R25, YAMAHA YZF-R3, KAWASAKI W650, HONDA NC700X, HONDA NC700S, YAMAHA MT-25, YAMAHA MT-03 (2015-), HONDA CRF1000L Africa Twin, HONDA CBR400R (2013-), HONDA CBR250RR(2017-)
Dare Iron
I like the fact that it is made of steel. 1 pc does not need Aluminum, which is not even light enough to be Large and has a high breakage risk.
If there is an Oil Filter, it would be Large sturdy, but if you remove it, it should not be Minus because there is actually a lot of iron powder on it.
Wiring holes are available for circuit driving.
I would like CostCut to omit the attached Wire, as I think people who are wiring in the first place have it on a roll.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Good heating effect
My motorcycle is HONDA CB650R, and I have always wanted to modify a heating handle. I am afraid of buying bad products on other websites, so I bought this KIJIMA heating handle from webike. This heating handle supports the installation of various types of motorcycles and is easy to install. The heating effect is very good after the actual experience. View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
Very good quality
My motorcycle is often parked outdoors, so this DAYTONA motorcycle cover I bought in webike has excellent waterproof and sunscreen effect, and it is fixed firmly and will not be blown away by the wind. It is extremely cost-effective. View detail
Fits: HONDA 400X, HONDA CBR650R, HONDA CB650R, HONDA CBR650F, HONDA CBR650F, HONDA CB650F, HONDA CB650F, HONDA REBLE500, HONDA REBLE500, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB250F, HONDA CB250F, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R
Might be easier to Control than OEM
The OEMPad was replaced from the OEMPad in conjunction with the vehicle inspection and maintenance.
Even though there are many opportunities to drive on mountain passes, the basic idea is city driving.
I thought that if the performance was as good as OEMPad, it would be enough for my needs, and I thought about replacing it with OEMPad at first, but I chose sbs this time because it is more reasonable than OEM and I can use the same manufacturer's products in front and back even for Z900, which does not have many compatible products in Other Brand Products. However, we chose sbs this time because it is more reasonable than OEM and because we can use the same manufacturer's products for both front and rear of Z900.
I only rode less than 40 km on the way back from the Motorcycle shop, but I felt that it was less effective than OEM when I started stepping on it.
However, it is not that it does not work, but that it is easier to adjust the vehicle speed with the rear brake.
This area may have a different evaluation depending on how you perceive it and your tastes.
I have not yet tried to make it work like stepping into a gut, so I would like to experiment with that in the future.
Durability is rated as 3 because it is just after replacement, but I will evaluate this again at the next replacement.
View detail
Fits: HONDA 400X, HONDA CBR650R, HONDA CB650R, HONDA CBR650F, HONDA CBR650F, HONDA CB650F, HONDA CB650F, HONDA REBLE500, HONDA REBLE500, HONDA 400X, HONDA 400X, HONDA 400X, HONDA CBR400R, HONDA CB250F, HONDA CB250F, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R, HONDA CBR250R, HONDA CBR250R SPECIAL EDITION, HONDA CBR250R
The brake force is strengthened
My motorcycle is KAWASAKI Z900. Although this car has the original dual-disc brakes, I feel that the braking force is always lacking, and the cost of replacing the calipers is too high. I bought this SBS Street with the attitude of giving it a try. Excel Sinter 881LS brake pads, the effect is quite satisfactory, compared with the original factory, there is some improvement, and the feel is not so hard. This is a cost-effective solution. -------------------------------------------------- -------- My motorcycle is Kawasaki Z900. Although this car is the original double disc brake, I think there is always some lack of brakes. The cost of changing caliper is too great. Excel Sinter 881LS brake pads, the effect is still relatively satisfactory factory. Compared with the original factory, it has some improvement, and the feel is not bad. This is a cost -effective solution. Powered by Google Translator View detail
Fits: HONDA CBR250R, HONDA CB250F, HONDA CBR250R
For First Choice of Sprocket Replacement
[How is it used?
Used as a replacement from OEM.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I used ShopNavigation, so I will omit it.
How was your experience with it?
I feel that it bites firmly and Shift goes in well.
[Included Parts:were they on?
It was attached.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
It is strong.
My previous Cover was damaged in less than a year, but this product is sturdy!
The handlebar is designed to allow air to escape, preventing stuffiness and stress on the cover fabric.
There are holes for Wire in the front and rear, and the Rear is securely covered with a drawstring Style, so there is no problem with security measures.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Questionable for use in extremely cold weather?
The palm side of the hand still feels warm, but the instep side does not feel as warm.
In cold temperatures, the fingertips become especially cold, and even with a hand guard, prolonged use would be difficult.
View detail