Reviews
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
KIJIMA VANS x CULT Collaboration Grip 7/8-inch
KIJIMA VANS x CULT Collaboration Grip 7/8-inch It goes well with the blue w800. I'm very satisfied with the harmonious color. The grip is moderate and not slippery. It became a better w800 with a unique pattern. As expected, the delivery was fast and the quality was good, so it was a satisfying deal. Thank you. View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
It's still good!
I think DAYTONA's Cover is cosy. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Very warm
I purchased this product to make winter touring more comfortable.
The temperature can be adjusted and it is very warm, even through the thicker Gloves.
It is indispensable for winter touring.
LED Indicator glows in 5 colors to adjust Grip temperature.
5-step temperature control for Blue, Green Light, Color:It emits light in Yellow, Orange, and Red, so it is easy to check while driving.
Green Light or Color during warm daytime hours:Yellow. I use it in the morning and evening, adjusting it to Orange or Red.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CBR400R, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA MSX125, HONDA GROM, HONDA CB300R, HONDA NS-1, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA Monkey125, HONDA CB300R, HONDA NS-1, HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA Monkey125
First time Short lever
This is my first short lever type. The 3D machining of the lever part is comfortable even through the gloves, and it seems to prevent slipping. View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Almost satisfied
I used it on my gsx250r. It is the size of the limit in terms of the large size, so I think it is a little strange to cover it with a large size, but if it is too large, it will rub on the ground and get dirty, so it depends on which side you take. I chose this one because I wanted to use it as a perfect fit, but I am prepared for the fact that it is hard to put on. However, as you can see in the picture, the bottom of the bag is not touching the ground, but only the front side is touching the ground.
Also, the flame retardant Seal to put on the Exhaust System contact area peeled right off, so I threw it away. I don't need it because I don't cover it while it is hot, but it might be MinusPoint for those who are looking for it. I'd be happy if it had stuck to a wider area originally.
View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
comfortable grip
This KIJIMA (Tajima) VANS × CULT 7/8" grip cover I bought on webike is very suitable for my Kawasaki Ninja ZX-6R. This is a joint grip cover, combined with VANS classic texture , very comfortable to hold. -------------------------------------------- -------------- This Kijima (Tanishima) Vans × Cult 7/8 ""grip set that I bought on Webike and installed it on my Ninja ZX-6R of Kawasaki. grab. Powered by Google Translator View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Performance is satisfactory. Surprisingly installation Large change
? functional aspect
It is the middle of winter and you can feel the warmth even from Winter Gloves, which is more than satisfactory for the price.
I am not dissatisfied with the Grip feel as well as the OEM et cetera.
? installation
The Right Side is no problem since the entire Throttle is replaced, but the Left Side is very tight and is difficult to insert even after warming it up by energizing it according to the Instruction Manual.
I used soapy water because using lubricant might cause the grips to spin later, but even so, I finally got them in after about 10 minutes of gripping at full power.
After that, it doesn't freak me out, so in the case of the SV650, no bond is needed.
View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
You should definitely buy it!
When I bought a motorcycle, I immediately ordered this product to protect my License Plate. (^ ^) View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Installed on a 2011 CBR600RR.
According to the Webike system, the CBR600RR is compatible with the 2023 CBR600RR and GH10 130mm Type, but the year is not shown in the Others section. I measured the actual length of the grip and it was exactly 120mm, so I chose the 120mm type.
The installation was done by a nearby store using PITService, but this 2011 CBR600RR requires the tank and air cleaner to be removed and the carburetor side to be loosened in order to remove the thailand part of the accelerator wire. Therefore, it seemed to be quite a lot of work. (I had given up on installing it by myself because I had gotten the information beforehand.)
It heats up immediately after turning on the power and it is hot when the power is at 100%. It is very comfortable.
I was also concerned about mishandling of the Blinker, but there seems to be no problem.
Grip diameter is no different from NORMAL. The surface pattern is also within the safe range.
The motive was that I did not want to wear thick Winterhoof Gloves, but this would be Large length even with thinner Gloves.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
useful gadgets
My motorcycle is YAMAHA NMAX155. When I changed the brake fluid last time, I broke the original air release rubber cap. I have nowhere to buy it. Until I saw this KIJIMA air release screw rubber cap on webike. It is a universal accessory, suitable for most motorcycles, and the red one looks better. -------------------------------------------------- -------- My motorcycle is YAMAHA NMAX155. When I replaced the brake oil last time, I broke the original air -to -rubber rubber and I had no place to buy it until I saw this Kijima put the air screw rubber cover. It is a universal accessory, suitable for most motorcycles, and the red ones are better. Powered by Google Translator View detail
Fits: HONDA XL250, HONDA CRF250M, HONDA CRF250L, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBF250 04/05, HONDA CB250F, HONDA XR250MOTARD, HONDA XR250 BAJA, HONDA XR250 BAJA, HONDA XR250, HONDA XR250, HONDA XR250, HONDA XL250
Used on CB250R
I changed from 14T to 15T because CB250R is NORMAL and it is Mild because of the hard 1st and 2nd gear donk and engine braking.
It is very easy to handle.
I think this could be NORMAL.
Highways are also easier because the RPMs are lower.
However, as a matter of course, the sense of acceleration is weakened, so the unique DASH feeling of the CB250R is diminished.
At first, I bought a cheap K company's product, but it was not machined with high accuracy and the play of the chain was very different between loose and flat, so I bought this product again.
There was no problem with this product.
When installing, the Chain Slider is difficult to get in afterwards, so hang is required.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
I should have put it on sooner.
I used to switch from one Gloves to another, but I took the plunge and bought this one. I had no idea they were so warm. It's hard to put on, but it works great. View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Repeat Buy
I bought it about 3 years ago and bought it Repeat because it was color-burned, weathered and torn from continuous abuse in the hot sun.
It is a good size for Aerox with Windshield and although it seems overpriced, I think it is a good product as it has lasted 3 years.
Unfortunately, the same color was not available so I bought the Silver and am using it as an Inner. The outside is still the same as the previous Cover and continues to be a shield against direct sunlight.
The double layer makes it hard to put on Chain, but I expect it to last even longer.
I wanted to add a video, but when I uploaded it to Youtube, it became a short video + the URL of the short video was rejected for posting impressions, so I'm pasting it here. If you are interested, please take a look.
DAYTONAMotorcycle Cover (for Webike Impreza)
https://youtube.com/shorts/Q49LGUj5JMI?feature=share
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
Maintains functionality after approximately 1 year and 10 months
There are so many types of Motorcycle Covers that it is hard to know which one to buy.
I don't think price is proportional to durability, and there's no way to find out in the first place…
So I used to buy relatively inexpensive ones and replace them each time they tore.
This time, Doppelganger StretchMotorcycle Cover2/I bought the DCC533-GY as an inside Cover and wanted something that would last as long as possible to keep the inside dry, so I bought this Motorcycle Cover.
[How is it used?
It is stored completely outdoors and Blue Sky without a carport and is exposed to wind and rain 365 days a year.
It is a harsh environment for Cover because there is no obstruction around it and it is exposed to direct sunlight.
Was the one you received as per Image?
Yes, it was approximately as per Image.
○○The lack of a long vertical seam at the top of the head (back) is wonderful…3
I think the fabric is good to begin with.
When you hang the Cover, you can check the front and back by the color of the carrying handle, which is surprisingly convenient.
When the draw cord is pulled to tighten the foot, the lower part of the front and rear Wheels come out (it is sad that the Wheels get dirty from the wind and rain) …2
I was worried about rainwater getting in because the air ventilation is large, but there was no problem.
After removing the ○Cover, I crumple it up and put it in a bag, but it doesn't have any weird habits or tear in the fabric!
For YZF-R125, the height is perfect, but not tall enough.
I wonder if the high Seat has something to do with it?
How was your experience with it?
I have been using it for about 1 year and 10 months, and my impressions are as follows.
No seams have been cut.
○Waterproof property of the fabric is maintained.
○○Buckle & Belt is discolored but not cracked…5
I have also used the lock holes in the front and back and the seams have not frayed.
The front side of the carrying handle has faded from yellow to orange.
[Points to note]
Avoiding the edge of the Cover from the Side Stand allows the Draw cord to be pulled more (to take up slack in the Cover).
Tightening the draw cord and buckle&belt is important (if the cover is inflated by strong winds, dust particles can enter the cover and cause the cover to tear).
This is not the only attention point for this Cover. (LOL)
How did it compare to other products?
So far, I've used E Type by Y'S GEAR, Black Cover by DAYTONA, or a cheap cover sold at Home center, but so far, they are the same etc. or better.
Y'S GEAR and DAYTONA Cover… After about 2 years, the waterproof property has decreased and the long seam on the top of the head has torn!
Home center cheap Cover… Fabric ripped and RoseRose in less than 2 years.
So, based on my experience, I am quite excited about this Cover, which does not have a long seam on the top of the head.
I want it to last at least 2 years (2 more months!). If I have it for 4 years, I will become a Repeater.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Rivet Joint
Is the price going up?
Everything is going up in price.
View detail
Fits: HONDA CB400SS, HONDA CBR400R, HONDA CBR400R, SUZUKI STREET MAGIC II, SUZUKI WOLF50, SUZUKI STREET MAGIC, SUZUKI RM80 LX, SUZUKI RM80 LW, SUZUKI RM80 V, SUZUKI RM80LT, SUZUKI RM80 LV, SUZUKI RM80, SUZUKI STREET MAGIC 110II, SUZUKI STREET MAGIC 110, SUZUKI swish, SUZUKI WOLF125, SUZUKI GN125E, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI WOLF200
Sale price.
I bought it because of the Sale price, but at the regular price, I would rather buy another Cover.
I don't use the heat resistant Matte that comes with it.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
2019 C733A V-strom650 with
Grip length 120mm, just fit, no discomfort in thickness
Easy to handle on the Throttle side during installation
If I wanted, I would like to have waterproof property in the Connector.
If the Switch has a Click feeling, even better, the Switch can be shifted up or down slightly to reduce misoperation.
View detail
Fits: SUZUKI GSX1400, SUZUKI GSX-R1000, HONDA NSR250R, HONDA 400X, HONDA CB1100, HONDA CB250F, HONDA CB400SS, HONDA CB400SF, HONDA CB750, HONDA CBR400R, HONDA CBR600F, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA VFR400R, HONDA VFR800, HONDA VT250 SPADA, HONDA X11, HONDA X4, HONDA DREAM50
It's installed.
Installed on sv650x with no problems.
There are no particular concerns while driving.
I was happy with the appearance and the choice of Silver.
I would like to expect durability.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Is it malfunctioning?
Even though the power supply is connected from 5A for YamahaOEMHarnessGrip warmer, it is still slightly warm to the touch with bare hands?
(stopped) is about
Maybe you pulled a HaGap.
I also use YamahaOEM with nmax and DINK with Endurance's Grip heater and it warms up well.
It's rather hot with bare hands.
View detail
Fits: SUZUKI GSX-R250, LAMBRETTA LAMBRETTA 200, LAMBRETTA LAMBRETTA 50, LAMBRETTA LAMBRETTA 125, HONDA CB250R, HONDA CB125R, APRILIA RS125, YAMAHA RZ350, YAMAHA SRX600, YAMAHA SRX400, YAMAHA SRX250, YAMAHA SR500, YAMAHA CYGNUSSR, YAMAHA MAJESTY S, YAMAHA MAJESTY 125, YAMAHA NMAX, SUZUKI Gixxer 150., SUZUKI GSX125R, YAMAHA MT-03, HONDA PCX125
Cospa best
[How is it used?
covered parking area for bicycles
Was the one you received as per Image?
Cheaper than expected
How was your experience with it?
This is about right for 125cc.
[Points to note]
Unlike Takumi Cover, it is not recommended for parking bicycles where it melts with heat or where rain blows in.
How did it compare to other products?
It is not comparable to Takumi Cover, but it has the best cost performance, and if you want to replace it in a year, this is the best choice.
Other items that would be helpful
Installation Point or hang
When I squeezed the →anti-flap tight, it fit the body of the car.
View detail