Reviews
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
CB250R installed.
I installed it on my CB250R. Affordable and easy to see.
It's just right because it doesn't stick in the Motorcycle seat.
View detail
![Replacement Oil Filters [10 pcs]](https://img.webike-cdn.net/catalogue/images/117775/35200_TS.jpg)
Buy wisely in bulk! Recommendation for those who own several motorcycles!
10 pieces Quantity for business use" at a great price:The "Set" is a great recommendation for those who own several motorcycles, because you can buy them in bulk at a low price! It may seem like a lot to have 10 sets at once, but I have a Ninja 250SL and a Z125, and the discount is very helpful for me! View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
KITACO Short Reach Lever Set
Thank you for the fast delivery^^
It looks more like a genuine model than the other levers -------------------------------------------- -------------- Thank you for fast delivery ^^ The other lever looks like a pure type Powered by Google Translator
View detail
![AluminumBillet master cylinder cap[DCR]Type-3](https://img.webike-cdn.net/catalogue/images/105539/09080249_5f5672ab55afa_TS.jpg)
Don't leak.
Fluid will smear.
Mr. Manufacturer says there is no problem.
Diaphragm Plate should be present.
When I replaced it with DAYTONA, it didn't leak.
Is it Large sturdy if I get a new Diagram Flum?
But I'm not sure since I can't leak at the moment.
View detail
Fits: HONDA CB400F, HONDA 400X, HONDA CBR400R, HONDA CB250R, HONDA CB250F, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA CBR500R, HONDA CB500X, HONDA CB300R, HONDA Monkey125, HONDA NS-1
Speed La Lever set
Easy to use. Looks good. I like it. View detail
I chose Brand again because it is a reliable Brand.
The look was good enough for me and I decided to go with SNIPER again. It is easy to use. View detail
REBEL250
I am satisfied with the quality of the product, which was comparable to the OEM. View detail
![Brake Pad - ROAD [SP] Compound](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0320/23955328_20221223100829654_TS.jpg)
Genuine Brembo Front Pads for Kawasaki Z900
Brembo are a cracking brand when it comes to brake pads. Honestly, they are absolutley awesome. This bike is one of my own and has Brembo retro fitted calipers which does brake heavy and thought I would try the sintered ones first. Finding the correct part was pretty easy as I visited Brembo website and put my caliper details in. Webike had these in stock and so ordered with a few other parts. The shipping was fast and via EMS, delivered to me in 5 days. All was packed really well and did not move during transit, no damage at all. The pads came in their own Brembo branded packet and arrived with no chips or any visual damage at all. They feel solid and as they are heavily sintered and also have a fairly high heat resistance. Haviong used brembo pads many times before, the fiting is really straight forward and it takes little time to get these bedding in correctly. Very pleased and the bike will be stopping on a penny from now on. View detail
Hey!
Contact Person!
I thought I sent you an email telling you to Cancel!
View detail
Fits: HONDA CB250F, HONDA CBR125R, HONDA CBR250R (2011-)
cheap and reasonable
The Nut has a rubber-like thing to keep it from loosening. I still use a screw lock. I still use a screw lock.
The CarrierBody is made of steel, so the Drumstick is very heavy. But it has a magnet, so you can attach Emon's PurpleSaver for emergency use.
It is also waterproof to an unexpected degree. The inside of the bag doesn't get wet that much.
It looks tacky, but there is also a Pillion Bar, so it's a Recommendation!
View detail
Quantity:Ideal for 2pc finger operation
I thought at first that it was the same as OEM, but when I actually use it, I find it easier to apply the front brake. I thought at first that it was the same as OEM, but when I actually use it, I find it easier to apply the front brake. I can operate it with my index and middle fingers, but it is easier to put my fingers on than the OEM product. View detail
Useful for cold season commuting
[How is it used?
installed
Was the one you received as per Image?
Grip is Slim and good.
Was the installation difficult?
Left Side Grip is difficult to install. How do we get there?" I struggled with it for about 15 minutes. I hit it with a board and tapped it in with a plastic hammer, but the Motorcycle shop advised me not to do it as much as possible because it could be damaged.
How was your experience with it?
The product Single Body is warm, but it is even more effective if you use Knuckle guard, Cover, or other devices to protect it from the driving wind.
[Included Parts:were they on?
Everything was in place.
[Was there anything that disappointed you?
Sufficient performance is not a problem.
View detail
Fits: HONDA CL250, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB125R, HONDA MONKEY125, HONDA glom
Satisfied.
The original Monkey lever was too far away for me, who has small hands, so it was uncomfortable. It was difficult to stretch my fingers to grab the brake lever, and the clutch sensitivity was also difficult to get. I looked for it and found something like this, so I bought it. Looking at other people's reviews, they said it was very good, so I'm looking forward to installing it and trying it out. -------------------------------------------------- -------- Monkey Pure Lever was so far from my small hands, it was burdensome. It was hard to reach out to catch the brake lever and it was hard to catch the clutch. It was very nice to see other reviews. Powered by Google Translator View detail
Peace of mind that it is made by MORIWAKI
The peace of mind of being made by MORIWAKI.
I don't have Level gauge, so I guess I'll go back to OEM just in case I need to replace Oil.
So far, no problems at all.
View detail
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
It's more upscale, but it's self-serving.
All the vehicles I've ever owned have been in these Type Caps.
I came to replace it.
I have just purchased a MONKEY125 and I purchased this item.
I chose MORIWAKI because the Exhaust System is also MORIWAKI, and I aimed for a sense of unity.
It's really rated 4.8, but −0.2 is that Screw uses OEM.
If you buy a cap in Black color, you won't mind, but the one I chose is not in Black color, so the Bolt is floating.
I am trying to find a Bolt in Stainless or Titanium.
It is my favorite place to ride and I always see it.
Also, I think the purchase price is an easy price to choose.
View detail
be too much
I would like more room.
Sure, you can get in, but it will be tight-fitting with no room at all.
Recommendation to others is not possible at all.
It's a shame because I had high hopes for it
View detail
I am very grateful for this season!
My other car is equipped with a Grip Seater at Standard Equipment, and in the middle of winter, I have been benefiting from it, so I installed it on SecondMotorcycle as well.
As a result, WW could be a little warmer.
I guess the performance is a consideration for Battery capacity, etc., but if I had my wish, I would prefer a little more warmth...
The product looks and feels completely comfortable to hold.
Having said that, I have been able to spend this winter more comfortably than if I had nothing on!
View detail
Just right for NSR250R
I bought this for my NSR250R Cover.
It is not too thick, not too thin, just normal. When you hold the folded Cover, it is zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
Iridium plugs as standard
Tank was shifted sideways and replaced from above. mc41 with ABS View detail