Reviews
Fashion.
Good for those who prefer a thicker grip.
I thought the Grip feeling would be nice.
Look at it, look at it ^_^.
View detail
easily control the throttle
I replaced the old grip on my Suzuki Hayabusa with Kijima grip rubber. The grip is soft and resilent I can easily control the throttle. Hight quality and good price compared to performance. View detail
No worries about breakage
It is hard to break even if it falls over. Even if it breaks, spare parts are available at an affordable price. View detail
Good item for monkey 125!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too. View detail
Two years of use and still Large sturdy!
I used it on another vehicle with Blue empty parking for 2 years and it has worked fine with no problems except for some ragged loosening and fading of the fibrous material around the key for hole, so I bought a Repeat!
It is also useful for the Motorcycle body as it does not scratch easily!
I don't know because I have not used it in a dusty or sandy environment, but it works fine in an environment with Concrete and Asphalt floors.
View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
grown-up (man)
Replaced OEM for better rear visibility. View detail
Provides a premium feel when applying the front brake
About quality and texture, I can confirm that the quality is great and the material used is aluminum that is CNC machined to shape and finished with a mixture of grey, red and black anodized coatings.About the feeling of use, A wonderful design that perfectly attaches to the original Honda master cylinder and provides a premium feel when applying the front brake with it's solid construction and adjustable positioning. Products to buy together, To ad in continuing to achieve a more premium feel the addition of a quality set of hand grips would be ideal to also add to your cart to replace the original Honda grips.Difficulty of installation, I can say the fitment of the aluminum billet brake lever for my installation was easy due to the ease of access and the simple nature of securing it with the original Honda hardware.Cost performance and comparison with other products, The pricing of this product is high, you receive a very high quality part in regards to material used and the manufacturing process used that is not offered by the cheaper options.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Grip heater refill
I installed a replacement GH-10 that I had been using for 2 years, but it stopped working and during a Sale.
I was thinking of using something different, something made by DAYTONA or something with a separate controller, but I chose the GH-10 again because I thought the convenience of being able to operate it with a short push at hand could not be compensated for by the difference in price.
The Axel side is easy to install since it is integrated with the Throttle cone. The opposite side is difficult to install unless it is warmed up. Wiring is done by floating the Headlight in the back gap. It's still useful to have it from a little chilly season to winter.
View detail
Other Brand Product
Purchased in lieu of OEM Parts.
Which would be less expensive?
Functionality is fine.
Installation requires a hang.
Manual would be useful.
If you make a mistake, oil will leak.
Your attention, please.
View detail
It's very conspicuous...
Nomal black caps with pinch points are tacky.... View detail
Defective item
It was a molding defect with a tumor-like bump inside.
I had no time to return or exchange the product, so I had to go through a lot of trouble to remove the bump and install it, but I was disappointed with the quality of the product, which was less than Chinese for the good gold price.
View detail
Large change
LargeThey are solid, and most importantly, they have a waterproof feature, which is great. I chose the size by referring to the size chart. I have done so in the past, but I tended to buy a Large size because I was worried about it. If I did so, all the lower part of the cover would be on the ground, and it would be difficult to put the cover on and take it off. Moreover, the cover itself gets dirty. This time, I chose a size a little longer than the overall length of my motorcycle, so it was just right. View detail
Fits: Others , HONDA glom, HONDA CB125R, HONDA XR230, HONDA XR250MOTARD, HONDA VTR250, HONDA NIGHTHAWK250, HONDA VT250 SPADA, HONDA CB250F, HONDA CB250R, HONDA CRM250AR, HONDA CRF250RALLY50, HONDA CRF300L, HONDA CB400F, HONDA CB400SF, HONDA 400X, HONDA NC700S, HONDA NC700X, HONDA PCX, HONDA FUSION
Wider.
Good because the range is wider than OEM View detail
Add on to Clamp on heated grips
Best bang for your buck, works ok, and i like it works/plugs in with clamp on heated grips! I have good luck with most all webike products. I purchased 1 of these along with the associated heated lock grips for my wife's and my bikes. Installation was straight forward after watching the videos. Just had a chance to try them out over winter break with temps around 10C - 15C. They took a few minutes to warm up, but did a great job. We typically started on a setting of 2 - 3, then turned them off after our riding activity increased. Very warm, even through our winter gloves. Great purchase, happy wife!Would recommend! Fast shipping as always too.Thank you Webike. View detail
Easy to install, better than ManufacturerOEM
The switch is integrated with the grips for easy installation, requiring only wiring and no effort.
It is also possible to point it straight up to avoid touching it when operating the blinker. If you warm up the Heater to the maximum Large setting, you can easily pull out the Grip.
The thickness is just right for general OEMSize and is a non-slip Material.
View detail
Fits: HONDA XL250 Degree MD31, HONDA XL250 Degree MD26, HONDA XLR250 R (Baja) MD16, HONDA XLR250 R (Baja) MD20, HONDA XLR250 R (Baja) MD22, HONDA XLR250 R3 (Baja) MD20, HONDA XLR250 R3 (Baja) MD16, HONDA XLR250 R3 (Baja) MD22, HONDA XR250 (Baja) MD30, HONDA XR250 (Motard) MD30, HONDA XR650 L, HONDA XR650 R RD06, HONDA XR650 RE01, HONDA CBX250 RS MC10, HONDA CBX250 S MC10, HONDA CBX250 SS MC10, HONDA XR400R NE03 96-98, HONDA XR400 Motard ND08 05-09, HONDA XR600R PE04 85-93, HONDA NX650DOMINATOR RD02 92-94
It is the best cospa
It can be used in the same way as OEM Product and is very cost effective.
The product was highly accurate and there were no oil leaks, etc.
View detail
To be used for DTRACKER125
I plan to use it for the next oil change of my DTRACKER125. It is a commuter motorcycle and I replace the oil every 2000 km, and I replace the filter every two times. View detail
very good. This is excellent in finish and quality
There were many subsidiary materials, so there was no difficulty in installing them, and I personally think the LED light is beautiful I'm willing to install it on my other bike. View detail
Fitted with 520Conversion of Zr-7
I installed 36T with 520Conversion in Zr-7.
I have not researched it in detail, but I think the only 520Sprocket for Zr-7 is lineuped only by SUNSTAR. I would be very grateful if there is a 520 setting since it is an old motorcycle.
Before the replacement, I had a 525 OEMSteelSprocket, so the 520 Duralumin is laughably light. And of course, I feel more nimble when I roll my Motorcycle.
Life may be inferior to Steel, but I personally find it acceptable because I think Large is what you get with lighter weight.
View detail
Installation Notes
I think this is a good product for those who ride motorcycles "without gloves". Also, when installing it, you have to be careful when inserting it into the lever or it will tear. You may need to hang it a little. View detail