Reviews
Fits: HONDA CB250R, HONDA MONKEY125, HONDA CBR250RR, HONDA CB300R
Simple
Simple and unobtrusive, it is suitable for large people.
I wish there were more colors available.
The texture is so-so.
View detail
Fits: HONDA CB300R, HONDA Rebel300, SUZUKI 250SB, KAWASAKI SUPER SHERPA, KAWASAKI ELIMINATOR 125, KAWASAKI Ninja 250SL, KAWASAKI Ninja 250SL, KAWASAKI KSR110, KAWASAKI KLX450R, KAWASAKI KLX250SR, KAWASAKI KLX250R, KAWASAKI KLX250ES, KAWASAKI KLX250R SE, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250, KAWASAKI KLX250 SR, KAWASAKI KLX250 ES, KAWASAKI KLX230, KAWASAKI KLX230 R
collecting together and buying
Since the KLX230R is a Racer, I try to change the oil rather frequently, and since I change the Filter every two times, I buy them in bulk and stock them rather than buying them one at a time.
Since it is made by DAYTONA, it is a safe Oil Filter!
View detail
Fits: HONDA XR400R, HONDA GB500, HONDA FMX650, HONDA XR650, HONDA GB400, HONDA CBX250RS, HONDA CBX250RS, HONDA GB400, HONDA GB400, HONDA GB400, KAWASAKI KX450F, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN, HONDA GB250 CLUBMAN
Inexpensive, too.
Oil Filter should be more concerned with regular replacement than choosing Brand.
Oil filters are simple in construction. Unless the filter paper is very poor quality, it is not impossible for the filter paper to filter the oil. Also, unless you use very low quality engine oil, the filter paper will not be clogged by oil sludge.
For vehicles that only lubricate the engine, if high-quality engine oil is used, there is no OilSludge at all even after 20,000 km. As a test, we disassembled an oil filter with 20,000 kilometers and inspected the filter paper. The dirt was so fine that we could not tell which was the back and which was the front.
However, in the case of a motorcycle that is simultaneously lubricated with Mission, even after several thousand kilometers, gold dust accumulates, and the front and back sides of the motorcycle can be seen.
KLX125 has 6000km and I changed Oil Filter at the same time.
The filter we chose was made by KIJIMA. I chose this filter because of its low price and because I trust the KIJIMA brand.
To replace the oil filter cover, remove the three 8mm bolts from the oil filter cover after draining the engine oil.
Even if the engine oil is completely drained, oil will spill when the cover is removed.
After removing the old filter, wipe off the oil well and insert the new filter. Since they do not stick backwards, you should not make a mistake in the direction.
When installing the cover, make sure that the spring of the filter holder is properly attached in place.
It is also important to replace the O-rings, but be careful because Kawasaki OEM O-rings (made in Thailand) are slightly larger in size and often stick out of the groove.
The 8mm mounting Bolt should be tightened gradually to an even etc.
After adding engine oil, cranking the engine, and confirming that there is no oil seepage from the mounting surface of the Cover, the work is complete.
When oil replacement of KLX125 is done in the upright position as per the manual, and the drain is tightened about 5 minutes after oil is removed, the prescribed amount of 900cc (1000cc if oil filter is replaced at the same time) is just right. However, for someone like me, who shakes the car body to remove all the oil, and leaves the car for several hours to allow the oil to drain completely, the specified amount is not enough at all.
The extra 50 to 100cc must be added gradually while watching the Level gauge, until it reaches the middle of the Level gauge.
Also note that the correct way to measure the Level gauge on the KLX125 is with the body upright and all screwed down.
The engine oil of the air-cooled SmallEngine Displacement Volume KLX125 deteriorates about twice as fast as that of the water-cooled NINJA650.
After removing the oil filter, let's disassemble the filter paper part. You can visually check how well the filter is working.
If there is no contamination at all, your Oil Filter replacement Cycle is too short.
The engine oil is Yamaha Premium, and the replacement cycle is 1000 to 1500 km.
View detail
Fits: HONDA 400X, HONDA 400X, HONDA videotape recorder, HONDA PCX150, HONDA PCX150, HONDA PCX HYBRID, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA GROM, HONDA GROM, HONDA GROM, HONDA FORZA, HONDA CBR400R, HONDA CBR400R, HONDA CBR400R, HONDA CBR250RRR, HONDA CBR250R, HONDA CBR250R
Image changes
It was a good decision to buy it because the Tension goes up every time I ride. View detail
Fits: HONDA 400X, HONDA CBR400R, HONDA NC750X LD, HONDA NC750X, HONDA NC750S, HONDA CB400F, YAMAHA Majesty S, YAMAHA Majesty 125, YAMAHA Majesty 125, YAMAHA Cygnus X, YAMAHA Cygnus X125SR FI, YAMAHA Cygnus X125SR FI, YAMAHA MT-01, YAMAHA BW'S125X, YAMAHA BW'S125, SUZUKI Sky Wave 650, SUZUKI Sky Wave 650, SUZUKI Gemma., SUZUKI Impulse 400 Type S, SUZUKI Impulse 400
Stays firmly in place
I replaced the previous pad because it was impossibly low. It stops well for city driving. View detail
Fits: HONDA CB125R, HONDA CB223S, HONDA CB250F, HONDA PCX125, HONDA PCX150, HONDA VTR-F, YAMAHA Helmet in JOG, YAMAHA XG250 TRICKER, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA GRAND AXIS, YAMAHA AXIS 90, YAMAHA XT250X, YAMAHA WR250, YAMAHA TW200, YAMAHA TW225, YAMAHA JOG90
Recommendation to dress-up around Handlebar
[How is it used?
Installed on a PCX125JF56. the brake master cylinder cap had deteriorated considerably and was very dirty, so I decided to buy this product which can dress-up the cap.
Was the one you received as per Image?
I am very satisfied with the product, the texture and appearance are better than I expected.
Was the installation difficult?
It's easy, just remove the OEM brake master cylinder cap and put it in the same position. I used the supplied bolt to secure it in place.
How was your experience with it?
I am glad I changed it because it is a One Point around the Handlebar and the Tension goes up every time I drive. It is a little Custom, but I think the quality is very good for this price.
[Included Parts:were they on?
It contains an attached fixing Bolt.
The OEM bolt can be removed with a Phillips screwdriver, but I think the supplied special bolt is hexagonal.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: HONDA CT125, HONDA GROM, HONDA MSX GROM, HONDA MONKEY125, HONDA MONKEY125, HONDA SUPER CUBC125, HONDA REBEL250, HONDA REBEL500, HONDA CBR250R, HONDA CB250F, HONDA CRF250 RALLY, HONDA CBR400R, HONDA CB400F, HONDA 400X, KAWASAKI Ninja400R, HONDA CRF250L, HONDA CRF250M, HONDA NC700S, HONDA NC700X, HONDA CBR125R
Subtle Styled Part for the Monkey 125
About quality and texture: I am happy with the quality of the oil filler cap from SP Takegawa, machined from aluminium with a gloss silver anodized surface finish. About the feeling of use: Well worth the purchase to just be able to remove the OEM plastic oil filler cap but with it's subtle styling the SP Takegawa oil filler cap adds to the other high quality finishes on the Monkey 125. Products to buy together: The left hand engine cover timing and crank caps from SP Takegawa would also be desirable to purchase along side the oil filler cap to add some matched styling to the other side of the engine. Difficulty of installation: The process to install takes 5 minutes, remove the OEM oil filler cap and install and tighten the oil filler cap using a single hex socket to avoid damaging the aluminium. Not difficult to do. Cost performance and comparison with other products: Great costing as you are getting a very high quality manufactured and designed oil filler cap for a good, there are not many cheaper options made from aluminium but you can spend much more from brands like G-Craft and Yoshimura. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: I see no concerns or cautions to be advised of in regards to this product. If you are looking for a nicely styled and quality oil filler plug for your Monkey 125 then go for it, available in a variety of colours too. View detail
Fits: DUCATI 1098 S TRICOLORE, YAMAHA FZR250, DUCATI 749, DUCATI 748, DUCATI 748SPS, KAWASAKI ESTRELLARS, TRIUMPH DAYTONA675, MV AGUSTA BRUTALE-S, DUCATI 748SP, DUCATI 748S, DUCATI 748RS, DUCATI 748R, KAWASAKI ESTRELLARS LIMITED EDITION, DUCATI 749S, DUCATI 749R, DUCATI 749 DARK, DUCATI 1098 S, KAWASAKI ELIMINATOR 125, DUCATI STREETFIGHTER848, DUCATI 1299
Motorcycle CoverSIMPLE L Size
I am satisfied with the price and ease of use. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: HONDA SUPER CUBC125, HONDA GROM, HONDA MSX125, HONDA MSX125SF, HONDA CT125, HONDA CB125R, HONDA CB250F, HONDA MONKEY125, HONDA CBR250R, HONDA MSX, HONDA GROM, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA MONKEY125ThailandMODEL, HONDA CB150R, HONDA DAX125
Purchased with Clutch lever
Purchased together with Clutch lever. Easy to grip and high quality. View detail
Fits: HONDA MONKEY125, HONDA MSX125SF, HONDA MSX125, HONDA MSX GROM, HONDA GROM, HONDA CBR250R, HONDA CB250F, HONDA CB125R, HONDA CB150R
It looks good, just as I thought it would.
A bit pricey, but the Size and look are just as I expected. Installation was easy. View detail
Fits: HONDA GIORNO CREA, HONDA JADE 250, HONDA JADE 250S, HONDA SILVER WINGGT400ABS, HONDA SILVER WINGGT400, HONDA SILVER WING, HONDA SILVER WINGFJS600, HONDA SHADOW125, HONDA CREA・SCOOPYSPECIAL Knife, HONDA CREA・CREA SCOOPYSPECIAL Knife, HONDA CREA・SCOOPY, HONDA CREA・CREA SCOOPY, HONDA XL-DEGREE250, HONDA XR250MOTARD, HONDA XR250, HONDA XR250, HONDA VTZ250, HONDA V-TWIN MAGNA250, HONDA X11, HONDA VTR
Buy for durability alone.
The comparison is to the company's Windshield IRIDIUMIXPlug.
So there is little change in feel. It was just a little bit of Brush-bo, a little bit of gloss. I felt that it might be a little bit Brush-bo.
But it is also more durable, which means less maintenance, which is a big advantage for Cowl vehicles that are troublesome to replace.
The price difference is not expensive at all considering the usable distance, so I will probably only purchase and install this MotoDX plug when I run out of my current stock of standard Iridium plugs.
View detail
Fits: SUZUKI GSR750, YAMAHA XJR400R, YAMAHA XJR400, HONDA GROM, HONDA CB400SF Revo, HONDA CB400SF vtecIII, HONDA CB400SF vtecII, HONDA CB400SF vtecI, HONDA CB400SF, HONDA CB1100EX I, HONDA CB1100EX, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1100, HONDA CB1100 I, HONDA CB1100RS, HONDA NC700S, HONDA CB400SB vtecIII, HONDA CB400SB Revo, HONDA CB250F
change one's mood
[How is it used?
I wanted to make it Cafe racer style … but it is hard to have back pain and I don't want to remove the Top Bridge or change the Hose … so I bought it with a half-hearted and he-sauce idea.
Was the one you received as per Image?
Looks quite sturdy.
Was the installation difficult?
The installation itself is not that large, as it is simply attached to the NORMALBundle Bracket and does not require hose replacement. However, since there are many parts that can be adjusted such as hanging angle, height, width, etc., it took time to set the position of the tank and lever/switch box so that they do not interfere with each other, and to set the desired position. And while I was adjusting the position, I got a lot of scratches….
How was your experience with it?
If you can also use Bundle locks, it ends up not much different from NORMAL in terms of height, etc. But I am satisfied with it.
[Included Parts:were they on?
(after the -te form of a verb) not ..
[Was there anything that disappointed you?
If only the price were lower!
View detail
Fits: HONDA Rebel300, HONDA CB300R, HONDA CB250F, HONDA DN-01, HONDA REBEL250, HONDA CRF250M, HONDA CRF250 RALLY ABS, HONDA CRF250L, HONDA CBR250R, HONDA CRF250 RALLY, HONDA CB250R
High performance
Since I don't change it often, I chose a high-performance one, although it is a little expensive. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail
Fits: HONDA 400X, HONDA CB400F, HONDA CBR400R, HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA GROM, HONDA MSX125, HONDA Monkey125, HONDA NS-1, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA CBR500R, HONDA Monkey125, HONDA NS-1, HONDA CB300R, HONDA CB500F, HONDA CB500X, HONDA CBR500R
Great levers for short fingers
These SSK levers have 2 adjustments, reach and length of leaver. They look and feel quality. The levers also have a hinge to help prevent them breaking off in the event of your bike dropping. View detail
Fits: HONDA CB250F, HONDA CB250R, HONDA CBR250R, HONDA CB300R, HONDA CB300R
I've got everything I need.
Considering the cost and effort required to prepare a Single Item, it is inexpensive.
I recommend it with no performance problems.
View detail
Fits: HONDA CBR250RR, HONDA MONKEY125, HONDA CL500, HONDA CL250, HONDA GB350S, HONDA GB350, HONDA Super Cub C125, HONDA GROM, HONDA CB250R, HONDA MONKEY125, HONDA CB125R, HONDA CBR250R, HONDA CBR250RR, HONDA CBR250R, HONDA CB250F, HONDA CBR400R, HONDA CB250F, HONDA CB400F, HONDA CBR400R, HONDA 400X
Fit in hand
I have small hands, so the adjustable lever is very useful. The color is black, which looks tight and cool. Also, the grip is firm and good! View detail