Reviews
RCH-01
The rubber band of the gearshift foot is cracked on my Honda Monkey. To restore the appearance and functionality (so as not to spoil the shoes when interacting with metal) I purchased this rubber band. I had to trim the edges a little to give the original shape, but overall everything went fine. View detail
OEM Product Quality NTB of the same etc.
NTB has a proven track record in automotive parts.
The quality is the same as OEM parts, but the price is low and Wallet-friendly.
No problems with installation.
View detail
Is there a problem with being thinner than OEM?
I'm sorry I couldn't provide a photo, but when I used it on my NINJA2 Helmet 50RSL, I compared it with the OEM one, and the shaft part that holds the pad is clearly thinner,
The measurements were taken from the OEM, so they should be the same diameter." This was the case
I have a question for those who are familiar with Brake, is there any particular problem with the thin shaft part?
Has anyone who bought the same Stainless Steel Pad Pin had a similar case? I would like to hear your opinion. Thank you in advance.
View detail
More rust-resistant than OEM Product
I used this for an overhaul of a very old OEM Caliper. The previous owner had maintained it to some extent and it was not so badly worn, but I wanted to assemble it in a new and clean condition if I was going to overhaul it. I chose it because I wanted to assemble it in a brand new and clean condition. View detail
Fits: HONDA CB900, HONDA CBR250R, HONDA CBR250RRR, HONDA VFR400R, HONDA VFR400R Pro Arm, その他 , HONDA AX-1, HONDA CBR400F, HONDA CBR400F F3, HONDA CBR400R AERO, HONDA FT400, HONDA FT500, HONDA NS250F, HONDA NS250R, HONDA NS400R, HONDA VFR400Z, HONDA VT250F SPADA
Bolt
Bolt rusted instantly, but otherwise satisfied. View detail
Ignition System Refresh
Engine startability in winter was poor,
Standard Plug BP5HA to NGK Iridium Plug
Ignition coil for MC47 (Standard Tune in MC22)
Plug cord for the Uotani SP 2 (Plug cap uses OEM)
Startup is better and Idling is more stable.
The 6-speed 40 km/h is also easier to ride.
Torque did not experience any thickening.
View detail
Purchased wrong size
I bought the wrong size. I'm thinking of buying it again. View detail
excellent
i have always used NGK Iridium Plug CR9EHIX-9 4273 spark plugs they are the best for long run.i have used this spark plugs on my honda cbr xx superblack bird 1998 model they work very well no maintainance required. View detail
![Main Jet [KEIHIN Round Shape/Large]](https://img.webike-cdn.net/catalogue/13652/450-3030750_TS.jpg)
To match intake and exhaust system changes
MJ's position was raised due to the air cleaner element and the exhaust air removal Up. View detail
Rust-resistant Material from OEM:Replace with Stainless Steel!
OEM is prone to rust, so we replaced it with this product.
Cap is also included.
Material:I thought about Titanium, but it's too expensive Material:Stainless Steel
Quantity because Front is Double disk.:Buy 3 for 1 Set for 1 Vehicle.
The OEM cap can be removed with a slotted screwdriver.
This is very hard to loosen and almost nappy.
The attached Cap is a Hexagonal Wrench for peace of mind.
View detail
NGK Iridium Spark Plugs For HONDA HORNET250 (CB250F)
The cost was very good and purchased a set of 4.I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice.Thanks Webike View detail
About the feeling of use
Good produt.Performance was increased and it lasted a long time.About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Received today
I ordered 4 plugs and it's received today but still not installed. fast shiping and packaging is very safety.thanks webbike team.highly recomended. two boxes are differ with others but it's not an issue i have been check it using barcode scanner all 4 are original. View detail
Rubber added to Change Pedal for off-road motorcycle
I have been riding motorcycles for almost 50 years and have ridden more than 20 motorcycles, but recently I bought my first 2nd off-road motorcycle by Ponhang. Change pedal is a cylindrical piece of steel, Brake pedal is made of GizaGiza steel, Kick pedal has no rubber. Kick pedal has no rubber. Everywhere you go, shoes get scratched, soles hurt, and Kick pedals slip if you're not careful. In addition, they only stick to the toes. I have never ridden a motorcycle with such a bad footing.
As I wondered why anyone would buy such a thing, it occurred to me that I had bought an off-road vehicle even though I had no intention of driving on mountain roads at all. When I bought a KS-2 a while ago, it was still cute, so I could forgive the similarities, but this KMX125 is bare of ironiness and cheap plastic here and there.
I bought this rubber because I thought it would be easy to fit a thicker cylindrical Change pedal to prevent the toes of Sneakers from getting scratched. I burned an iron rod to a bright red color and inserted it into a new Change rubber several times to make the hole larger.
I don't know how long it will last, but I think it will keep the toes of my shoes from being damaged. By the way, I have a better one installed on my Harley883 that wraps around with Magic tape. This one is Ponhang's, so I think this will be just fine.
View detail
It's good because it lasts a long time and is hard to handle.
[How is it used?
It was installed on the front caliper and rear caliper of a YAMAHA TZr50R under restoration.
I thought the Pat Pin was rusty because it was an abandoned vehicle, but it was in beautiful condition thanks to this product.
Was the one you received as per Image?
We disassembled Caliper and cleaned it lightly, but it was clean enough to be usable as is.
Once again, it was a good price to purchase the product, so it was helpful. I like that it is durable as a product.
Was the installation difficult?
For those who can tinker with Caliper, I don't see any particular problem.
How was your experience with it?
I can't get a feel for the performance, but it seems to be fine.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
It's nice
Grip feels softer and less vibration. View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
High but improved maintainability
[How is it used?
I'm concerned about rust on the pad pins since we are in a salt-affected area.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Durability to be determined, Pad slides well.
[Included Parts:were they on?
None
[Was there anything that disappointed you? None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA REBEL, HONDA XR50 Motard (MOTARD), HONDA XR50 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR400 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard (MOTARD), HONDA XR250 Motard, HONDA XR250, HONDA XR250, HONDA XR250
NTB FrontStop-lamp switch for HondaDREAM50.
I have always found NTB products to be inexpensive and of high quality, so I ordered from them again,
The signs speak for themselves." This is what I mean,
I realized that NTB's products are nothing less than OEM parts,
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), SUZUKI GSX-R1000, SUZUKI GSX-R1000, HONDA VFR1200F Dual Clutch Transmission, HONDA VFR1200F Dual Clutch Transmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CBR500R
Convenient
I put it on a NSR250R SE MC28, but the MC28 has a bagged Stem Nut, so I bought a Stem Nut for the MC21,
We intentionally installed it with holes. By attaching this product, the Multi Bar Holder can be attached, and the Smartphone Holder and USB power supply can be attached.
View detail
Fits: HONDA STEED (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA STEEDVLX (STEED), HONDA STEEDVLX (STEED), HONDA STEED (STEED), HONDA STEEDVLS (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA CBR400R Limited Edition, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB-1
Cospa best
The size feels the same as the OEM product, so I have no problem installing it. The price is much lower than the OEM Product, so I can recommend this product. View detail