Reviews
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
The rustproof pin is safe and the cap is Haxe, so it is easier to lick than Minus.
[How is it used?
Rusty Pad pin for replacement
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
It is safe from rust because of salt damage area.
[Included Parts:were they on?
Cap
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR250R (2011-), SUZUKI GSX-R1000, SUZUKI GSX-R1000, HONDA VFR1200F Dual Clutch Transmission, HONDA VFR1200F Dual Clutch Transmission, HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR500R, HONDA CBR500R
For fixing Multi Bar Holder
[How is it used?
I purchased a Multi Bar Holder for Touring to secure it to the Stem Mount.
TZr250R (3XV) I wondered if I should use another SizeSmallest one, but I found a blog where this one was installed, so I decided to use it as a reference.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
I think another SizeSmaller one would be better for TZr250R.
Since the vehicle is old, the inside of the stem is uneven due to rust, so it does not go in easily.
Finally, this product was scraped off with a sandpaper and then lightly tapped in with a plahan.
How was your experience with it?
It is perfect for use with the Multi Bar Holder.
There is no sign of loosening at all, and it is firmly fixed.
[Included Parts:were they on?
This product only.
[Was there anything that disappointed you?
I thought it would be nice if Bolt was Black as it is not a particularly treated item.
【Review】
Essential items for fixing the Multi Bar Holder to the Stem.
It is inexpensive and good for a variety of vehicles.
However, as mentioned above, I think that for the TZr250R, it is better to use a size up to φ17mm.
View detail
Fits: HONDA GL1500 GOLD WING 1520cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA GL1500 BLACK WIDOW 1500cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR600F4 600cc All, HONDA CBR900RR 896cc All, HONDA CBR600F3 600cc All, HONDA CBR600F4 600cc All, HONDA CBR600F3 600cc All
Good
It came with YOSHIMURA's Sticker.
I feel that the cosmetics are good.
View detail
Fits: HONDA NSR250R, HONDA CBR650R, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR400R (2013-), HONDA CBR400R, HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CB250R, HONDA CB250R, HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CBR250RR (MC22), HONDA CB300R, HONDA CBR500R, HONDA CB300R, HONDA CBR500R
I wanted to use my phone as Navigation.
Mount Kit by DAYTONA (item no. 95444) Purchased with
Fixed with Mount Kit to the Stem hole.
It's good
The only bad thing I can say is that it gets really hot in direct sunlight. When I held it when installing it, it was really hot. (Lol)
View detail
Fits: HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SF NC31, HONDA CB400FOUR NC36, HONDA CB400SF VTEC Revo/SUPER BOLDOR NC42, HONDA Compatible with CB400SF VTEC NC39 SPEC2/SPEC3, HONDA CB400SF VTCE REVO/CB400SB NC42 ABS, HONDA CB750 RC42 *No instructional vehicles allowed., HONDA CB400SS, HONDA CBR400F ALL MODEL, HONDA CBR250R MC19, HONDA CBR250RR MC22, HONDA CBR250R MC17, HONDA CBR400RR NC29, HONDA CBR400RR NC23, HONDA CBX400F ALL MODEL , HONDA NC750S RC70, HONDA NC700X RC63, HONDA NC700S RC61
Adjust leverQuantity:Set
ClutchPower has been reduced.
I'm glad I bought it
View detail
Fits: KAWASAKI GPZ1100, HONDA CB1000 SF, HONDA CB1000R, HONDA CB1100, HONDA CB1300SB, HONDA CB1300SF, HONDA CB400FOUR(Air cooled), HONDA CB400FOUR (water-cooled), HONDA CB400SB, HONDA CB400SF, HONDA CB400SS, HONDA CB750F, HONDA CBR1000 F, HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR250 R MC17, HONDA CBR250 R MC19, HONDA CBR250R (MC41), HONDA CBR250RR, HONDA CBR400R(NC23)
The second unit is also Domino
I have Large hands and this Grip is just right.
I like the firmness just right.
View detail
Fits: HONDA HORNET-S, HONDA HORNET, HONDA XR250R, HONDA VFR800, HONDA VFR750R, HONDA VFR750F, HONDA RVF750, HONDA CBR900RR Fire blade, HONDA CBR650F, HONDA CBR600F, HONDA CBR400R, HONDA CBR250 FOUR, HONDA CBR250RR, HONDA CBR250R, HONDA CBR250R, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBF600S, HONDA CBF600 ABS, HONDA CBF600, HONDA CB650F
NGK Iridium Spark Plugs fro Honda CBR900RR Fireblade 1997
I was going to go for the standard OEM spark plugs for this service but when I saw the price of the iridium ones for the CBR900RR Fireblade, it was a no brainer to get these bad boys. These were easy to find using the tools provided by Webike and all the links to the manufactyrers websites.The cost was very good and purchased a set of 4. I have used iridium plugs before with great success as they seem to fire better than standard. I used EMS this time and everything arrived within a week. All packaged very well and no damage to anything in the order. Webike added additional bubble wrap for some of the parts to keep everything nice and snug. The plugs themselves are perfect. I have had some plugs befpre from overseas suppliers and generally, one of those had been a dud or just been broken during transit. Not this time. All 100% perfect and fired as they should. They do have a better performance than standard plugs but you would have to be a professional to actually notice the difference of the bat. Once fitted, the bike just feels smoother. Take your time and don't over tighten. One very happy customer. Thanks Webike View detail
Fits: HONDA CB400SB VTEC Revo, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CBR600F2/F3/F4/F4i PC25/PC35, HONDA CBR400R NC23, HONDA CB400SB VTCE REVO, HONDA CB400SF VTCE REVO, HONDA CBR400RR NC29 , HONDA CBR400RR NC23, HONDA CBR400F, HONDA CBR250RR MC22 , HONDA CBR250R MC19, HONDA CBR250R MC17, HONDA CB750 RC42 *No instructional vehicles allowed., HONDA CB400SS, HONDA CB400SF NC31, HONDA CB400FOUR NC36, HONDA Rebel300, HONDA REBEL500 PC60
Adjust lever
Aluminum adjustable lever is easy to install. (Installation Instruction Manual is available)
Very easy to use. I liked the adjustable grip width, the Large change, and the choice of good looking colors. I was told that it would take two months to get the product because it was out of stock, but I received it in one month. I am very grateful for that, because I could not find this model at other manufacturers.
I am especially glad that Clutch is lighter.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
high
Gasket exchange itself is something I think some people leave to Shop,
I would have liked to see some notes on the exchange.
Price could be a little lower.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, HONDA MAGNA750, HONDA MAGNA750, HONDA HORNET600S, HONDA HORNET600, HONDA BROS650, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA Z, HONDA FORZA Si, HONDA XELVIS, HONDA FAZE, HONDA STEED600, HONDA STEED400 VSE, HONDA STEED400, HONDA STEED400, HONDA STEED400, HONDA Silver wing600
KITACO KITACO Full Exhaust System Gasket (1 Set of 2pcs.)
It is a must-have item when replacing the Exhaust System.
I wish I could buy it at a lower price.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
With Pad exchange
When replacing the pad, the pin was replaced with this Stainless Steel.
It is good for rust resistance, but a little expensive.
Unlike the OEM Minus, the Cap part seems to be easy to remove and install.
View detail
Fits: YAMAHA YZF750, YAMAHA YZF750, YAMAHA XV1900, YAMAHA XV1900, YAMAHA XJ600, YAMAHA XJ600, YAMAHA FZR750, YAMAHA FZR600, KAWASAKI ZXR750, KAWASAKI ER-5, HONDA VFR750, HONDA VFR750, HONDA VFR750, HONDA ST1100, HONDA CBF500, HONDA CB600, HONDA CB400RR, YAMAHA YZF-R6, YAMAHA YZF-R46, YAMAHA YZF-R1
This product should not be sold
After replacing the Oil, while driving about 40 km.
Oil leaks out like a fountain.
For the Oil Filter, a reliable OEM is preferred.
It was an expensive learning experience.
View detail
Fits: HONDA CBR250R, HONDA CBR400RR, HONDA CBR250R, HONDA CB400SF, HONDA CB400SF, HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA RVF400, HONDA VFR400R, HONDA CB400SF, HONDA CB400FOUR, HONDA CB400SF, HONDA CBR900RR, HONDA CB400SB, HONDA Rebel300, YAMAHA 1100Classic, HONDA SHADOW1100, HONDA HORNET900
Good quality levers
About quality and texture : feels solid About the feeling of use :operations are smooth Difficulty of installation : easy to install About shipping and packaging : ship fast in good packaging View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Stainless Steel
I replaced the OEM because it was rusting. I don't think it will rust, so maintenance will be easier. View detail
Fits: HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
Replaced because it was rusted.
I bought this Motorcycle used, so I replaced it with a Caliper while I was doing CaliperOH.
I bought this one because the existing one had some rust.
View detail
Fits: HONDA NSR250R, HONDA NSR250R, HONDA NSR250R, HONDA NS50F, HONDA NSR250R, HONDA NS250, HONDA NS50F, HONDA NS250, HONDA NS250, HONDA NS-1, HONDA NS-1, HONDA MVX250F, HONDA MTX125R, HONDA MBX50, HONDA MBX50, HONDA MT50, HONDA MBX80 INTEGRA, HONDA MBX125F, HONDA MBX50, HONDA CBR600F
Used at TA20ACarburetor in MC18.
Used at TA20ACarburetor in MC18.
Purchased 1 pc. each of #130 and #132 as OEM.
View detail
Fits: HONDA VFR400R, HONDA RVF400, HONDA NC750X, HONDA NC750S, HONDA NC700X, HONDA NC700S, HONDA CBR400RR, HONDA CBR250R, HONDA CBR250R, HONDA CB400SB, HONDA CB400SF VTEC Revo, HONDA CB400SF VTEC, HONDA CBR900RR, HONDA CB400SB, HONDA CB400SF VTCE REVO, HONDA CB400SF, HONDA CB400FOUR, HONDA NSR250, HONDA CBX400F, HONDA CBR600F
Exquisite pull rod
I bought this SSK long collapsible adjustable tie rod set from webike. It is suitable for my HONDA REBEL500. It is made of high-strength aluminum alloy CNC very beautifully. Ergonomic design, easy to grasp, six-stage adjustable design, can be adjusted according to your own hand shape. -------------------------------------------------- -------- The SSK long type can be adjusted by the SSK long -type adjustable tide group I bought at Webike. It is suitable for my Honda Rebel500. The production of high -strength aluminum alloy CNC is very beautiful. The collapsed design can prevent the damage of the trolley of the tie rod, which is in line with the human body, which is in line with the human body. Engineering design, easy to grasp, six-stage adjustment design, can be adjusted according to to its own hand shape. Powered by Google Translator View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Great fit! High quality Stainless
A bit longer than intended for the front caliper. Maybe the pin I received is for the rear. But it fits properly on the front caliper anyway. View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
OEM has been reduced and replaced.
If you're going to replace it anyway, Material:I made it to Stainless Steel
I like that it comes with a Cap.
In OEM, the cap is a minus screw and the pin is hexagonal, so it is very convenient to be able to use the same tools.
I just wonder if the Cap is too thick, or if it's a little frustrating that the head comes out.
I'm talking about looks (and it's not like it's a spot you'd scrape when you fall over).
I think I will choose this one when replacing other models of cars.
View detail
Fits: HONDA GL1500 GOLD WING 1520cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA GL1500 GOLD WING 1500cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA GL1500 BLACK WIDOW 1500cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA CBR900RR FIREBLADE 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR900RR 900cc All, HONDA CBR600F4 600cc All, HONDA CBR900RR 896cc All, HONDA CBR600F3 600cc All, HONDA CBR600F4 600cc All, HONDA CBR600F3 600cc All
good
[How is it used?
While changing Oil
How was your experience with it?
I think the performance is normal.
However, the Bolt-type head makes it easy to work with.
Large sturdy without Filter wrench
The price is high for what it is.
How did it compare to other products?
[Points to note]
To be installed with Oil applied to ORing
Note the tightening Torque
Other items that would be helpful
Whether there are Included Parts:/ Items that should be purchased together/Opinions and requests to the Manufacturer
View detail