Reviews
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
Acceleration Up
15T→14T for acceleration up.
I thought I would lose fuel economy, but it ended up being better because it was easier to get on Speed!
View detail
HURRICANE triangular table spindle nut
Exquisite workmanship, cheap price, good materials, beautiful colors, very accurate size, easy to install, and fits perfectly in the car View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
C125 is the best choice
I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and the brand Kitako was trustworthy.
You won't feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. -------------------------------------------------- -------- I purchased it to replace C125 consumables. I chose it without hesitation because the price was cheap and I trusted the brand Kitako. You may not feel a huge difference, but I think it will still be better than the stock version. I am looking forward to its durability. Powered by Google Translator
View detail
Genuine DID 420NZ3 Gold Spare Chain Link
I do not really use these too often as they are basically one step up from a push bike chain anyway. But, it is always good to have them in stock just in case a customer needs one. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Quantity with high grip tire because it works well.:Set Exchange is a Recommendation
It definitely works better than the OEM Shoe, and the Feel when Brake is applied is good, especially the Rear, which makes me want to use it more aggressively.
Actually, before this DAYTONA made, I replaced the front and rear Brakes of the LITTLE CUB I used to own with Shoe made by a certain company, but the Rear started to squeal after one winter, not even a year had passed. It didn't affect the performance much, but when I was on the street, the Rear started to squeal. "Kikki!" However, the brake squeal stopped after I replaced it with a Daytona brake the summer before last. After that, I rode for a little more than a year without brake squeal.
The SUPER CUB110 is more powerful and heavier than the LITTLE CUB, so you can feel the effect of the SUPER CUB110. (Not as good as HUNTER and other disc brakes, of course.) The fluffy feeling is gone. I also feel that the front end sinks more deeply than the OEM when fully breaking.
Note that before replacing the Tire and Brake Shoe, the Rear sometimes locked up in Panic Breaking, but I think that was due to the OEMTire being poor. (The braking distance is not short because it locks)
After replacing the tires, I tried full breaking on a safe road, and both Front and Rear stopped firmly without locking. The fact that it did not lock up is probably due to the fact that I changed the tires to high grip BS BATTLAX BT-39SS at the same time. I am sure that the brake stops faster and shorter than before the change. I will not recommend this Brake Shoe with OEM Tire because I think it will lock up spectacularly! (Lol)
I have not ridden my JA44 so far, but I have replaced both front and rear with DAYTONA Shoe, so the braking balance is good.
View detail
Did not fit.
The conformity information is incorrect. I was disappointed because I purchased it on faith. View detail
Good looking!
The OEM filler cap on my CB400SF had deteriorated and was not looking good, so I replaced it.
I purchased this product because the Ditona product was good in terms of Cost. Installation was a simple task of removing and replacing the OEM, but I was a little concerned about the ORing being a little loose, but there are no oil leaks, so I think it is a good idea.
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
KITACO Drive Sprocket (Front)
It has good quality that can replace the genuine product.
Kitako products are popular with many buyers and are of excellent quality.
Considering the low cost and long durability, it would be difficult to choose a better product than this product.
I will continue to use this product and thank you for allowing me to use this great product. -------------------------------------------------- -------- It has good quality that can replace the genuine product. Kitako products are popular with many buyers and are of excellent quality. Considering the low cost and long durability, it would be difficult to choose a better product than this product. I will continue to use this product and thank you for allowing me to use this great product. Powered by Google Translator
View detail
Cosmetically good.
This is the only Sprocket that I can think of. I use the same number of pins. I use the same number of pins, and as a matter of course, I have no problems. View detail
good stars
Звезда 15 звёзд от Kitako как всегда отличного качества, беру уже не первый раз. Пользуюсь и наслаждаюсь как она чётко работает. Подходит как оригинал. Работает чётко.
The star of 15 stars from Kitako is, as always, of excellent quality, it's not the first time I've taken it. I use and enjoy how it works clearly. Fits like the original. It works clearly.
----------------------------------------------------------
The star 15 stars from Kitako as always of excellent quality, I have been taking it for the first time. I use and enjoy how it works clearly. Suitable as the original. It works clearly.
The Star of 15 Stars from Kitako is, As Always, of Excellent Quality, It's Not the First Time I've Taken It. I Use and Enjoy How It Works Clearly. Fits Like the Original. It Works Clearly.
Powered by Google Translator
View detail
For normal use, there is no problem at all.
The engine power is small, so the Driven Sprocket, which had been set at 15T to increase one step closer to the maximum speed, has been changed to standard in order to give priority to ease of use in the practical range. (OEM) I screwed up the head of the bolt by setting the torque wrench to 20Nm by mistake when I changed it back to 14T. (Reflection)
Well, since I have another Bolt and the threaded Bolt core is still there, I thought that the fixing plate would not come off and I could ride it for a while until a replacement Sprocket arrives. (Lol)
I kept it for about a month without any problem, and I bought a M6×10mm Stainless bolt to make a new Bolt, and replaced it with this KITACO Sprocket.
The OEMBolt does not have screws cut under the head to prevent the bolt from hitting the casing, so we used a washer to replace the thickness of the bolt that does not have screws cut. I should have bought an OEMBolt, but I didn't know the part number because I don't have the Parts List.
View detail
Bore up to 85cc
Bore up from 75ccBore up to 85cc.
The aluminum material used for the cylinder gives it a more luxurious look and feel.
I can't comment on durability, as I don't know how long it will last, but I think it is sufficient as a bore up that can be done with a normal head.
View detail
exchange
I purchased a new Sprocket to replace the Chain with a new one.
The price is reasonable and helpful.
View detail
Rear Sprocket purchased with tooth count change
Purchased to change the number of Chain pieces when changing the number of teeth on the Rear Sprocket. clip type is easy to adjust as it can be removed as many times as needed. View detail
It looks better now.
I put it on because it stands out from the OEM. View detail
It was cheap but no problem.
One point of view is good to stand out well. View detail