Reviews
1P2014
The head lamp on my Honda Little Cub burned out. I liked the price and parameters of this lamp (not much power does not overheat the cartridge). Everything turned out to be good in quality, the lamp works perfectly. View detail
Easy installation, no brightness problems.
Until now, we had been using Type with LEDs affixed at the top and bottom, but the straightness of the LEDs was poor when Up is lit, so we always used the LEDs facing down.
This type of LEDs are affixed in the LeftRight type, so the straightness when the LEDs are up is also OK. This time, I installed it on a square eye light, but I think it would be best for a round eye light. Finally, I am satisfied with the brightness.
View detail
It's confusing.
When you purchase Slip-on Silencer.
Click here to purchase Gasket." I bought it together with the Full Exhaust System because there was a LINK with it, but it was a part that I would not use unless I was replacing the Full Exhaust System.
I learned from the Instruction Manual for the Exhaust System I received that a joint gasket is required for the Slip-on Silencer for the first time, so this product was a waste of time.
I would like you to put up a LINK to the recommended parts to purchase for the product.
View detail
OEM same etc., inexpensive and good.
It was used for the second Exhaust System removal and installation.
The texture was almost the same as OEM.
Since it is Gasket, the feel is comfortable.
Quantity:1 Set of 2pcs. so it is also cosmetically pleasing.
View detail
WhiteLight and good looking!
It's super easy because all you have to do is change the Valve.
I was able to purchase Valve's length and fit without concern because of the information provided by its predecessors.
D-TRACKER-X's dark, orange-tinged light has been brightened to white.
I haven't driven at night yet, so I haven't been able to experience the true effect, but the impression of the motorcycle will change considerably just by having white light.
View detail
Bright and low power consumption
I was worried about whether I could install it on my KSR2 since the body is longer, but I saw the impressions of someone who had already installed it on his KSR and he said it could be installed, so I bought it and installed it.
The length was a limit, but I was able to install it, the Others had no problems with the installation, and the rubber cover went on without modification.
The beam coverage has been widened. The optical axis remains the same and is large and sturdy. The high beam illuminates high up and is even brighter, so you have to be careful of oncoming cars.
I also changed the tail lamp to LED, so the power consumption was reduced a lot. I installed the LeftSwitch of the previous model in my car, so I can switch from LightOff to Light when Halogen is on.
Idling dropped about 200 RPM when switched to On, but switching from LightOn to LightOff when LED has no effect on Idling.
View detail
OEM same etc.
Quantity:1 Set of 2pcs. to Spare when returning to OEM.
It's good enough
View detail
I put it on my RG 50Gamma.
It's just like changing a light bulb.
There is no problem
View detail
Fits: HONDA Giorno, HONDA jorio, HONDA G DASH, HONDA DIO, HONDA SUPER DIO, HONDA LIVE DIO, HONDA SUPER TACT
It didn't fit the GYROX mid-term.
It did not fit GYROX (TD01-17~).
The diameter of the thickest part is too thick and pops out even though it is shaved down a little to put it in.
I made my own Bracket and attached it with Rubber packing to hold it down.
View detail
Product # 450-3021000
It was purchased for the Honda Super Cub to adjust the fuel mixture after installing the whale 75, size 85. Everything is great, I recommend it to everyone to purchase. Purchased for a Honda Super Cub to adjust the fuel mixture after installing kit 75, size 85. Everything is great, I recommend it to everyone for purchase. View detail
Hand Jet
It was purchased for the Honda Monkey to adjust the fuel mixture size 85. Everything worked out great, I recommend it to everyone for purchase. Purchased for a Honda Monkey to adjust the fuel mixture size 85. Everything fits perfectly, I recommend it to everyone to purchase. View detail
subtle
Perhaps it is because the Scooter has a low power generation rate, but I feel that the Halogen bulb has a wider beam range and better visibility.
This might be better with a slightly better Halogen bulb.
View detail
KITACO KITACO Non Fade Brake Shoe
2Quantity as it is used for CANOPY:Set was required.
I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved.
View detail
KITACO Non Fade Brake Shoe
I just installed and used it, so I don't know how durable it is yet.
Brake's gain has improved.
View detail
It works well
This is a 2007 ZOOMER.
The mileage is about 6,000km as I only drive it occasionally, but the Brake squeal was getting worse, so I replaced it.
At first, the effect was not so good, probably due to the lack of hits, but then it started to squeak.
When I disassembled it, I found that it was still on one side, and after licking the perimeter with a file, it looked better.
I am satisfied with the soft but firm feeling of working well.
Durability is not yet known.
View detail
I was prepared, but ….
The Gasket could not be removed and was reused, although it was inexpensive and ready to go. View detail
Exactly
Size is Exactly on the Groms, Case is always removed so I don't use it in that state, Base is fine left on. The fabric is neither thick nor thin. View detail
I didn't feel the effect ….
Old Motorcycle about 30 years ago (about 5,000 km on the road) So, I replaced it with a new one for the purpose of refreshment, but as I am insensitive, I did not feel the replacement. The installation is easy because it is screwed on, but it is not difficult to access the Lead Valve because it is necessary to remove various parts, but it is large. View detail
Exactly to the Glom.
I installed SP Mukawa's Rear Carrier and it fits EXACTLY.
I bought a Rubber string at Daiso to hold it up because it seems to flap around when it's windy.
View detail
Headlight LED
Installation was easy. It was brighter than I expected. View detail