Reviews
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
Use with Ootani Coil
[How is it used?
Model used:FTR223
Applications:Street riding, Touring, Circuit
Period of use:About 3 years or so
Number of bottles used:About 4 Repeat purchases
Was the one you received as per Image?
As you can see in the image, the electrode is thicker than the one made by Denso, so I felt I could use it with the Votani Coil.
Was the installation difficult?
As long as you have a plug wrench, you should be able to do it without any problem if you are careful about the angle when tightening. There was no need to remove the tank.
How was your experience with it?
As mentioned in the Title, I will describe my impressions of using it with the Uotani Coil.
First of all, I was able to run with no trouble with the Utani Coil for the duration of its use. The electrode melted and I could not run. This was not the case.
The Iridium plugs themselves are good, as they are used in conjunction with the Utani Coil, but the start-up was very good, and the torque feeling was Large.
The Iridium plugs were excellent in terms of starting and torque, but once the electrodes got dirty from getting covered up, starting became extremely difficult, so I think the Standard Plug BP5HA would be a better choice for car bodies that use Watani Coil and tend to get covered up.
The Life had been replaced with a new one between 5,000km and 6,000km, as the Torque feeling changes after about 5,000km.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.
View detail
Fits: HONDA CRF450R, HONDA CRF250X, HONDA CRF250R, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA WR250R, YAMAHA WR250F, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI RM-Z450, YAMAHA WR426F, YAMAHA WR450F
D Use Repeat with TrackerFront
[How is it used?
D Used by TrackerFront.
Applications:Motard race, FlatDirt, Touring
I bought Repeat three times in eight years.
The brake disc rotor is a D-TRACKER-X large diameter one, and the caliper is OEM.
Was the one you received as per Image?
Just like the image. The base material, Gold, was not too assertive, but rather Large.
Was the installation difficult?
The installation is not that difficult, and if you have enough time, it is very durable.
However, if the piston is sticking or is reluctant to move, it will take a bit of work.
When removing the pad pin or caliper mounting bolt, it is recommended that you use a good precision tool from a proper tool manufacturer if possible.
When you remove the Pad, you can push the entire Pad when you push the Piston back. (Skinning) This can be done easily by using
How was your experience with it?
The performance was more than enough for my level. It decelerated as much as I gripped it firmly, and I didn't have any fading in the race. Other people have used this product in the production car class, but it is more expensive than this product. (One that is considered to have good performance) However, this product was able to decelerate as well as the Disc Rotor, and the life was long.
When I applied hard brakes, there was a lot of zinging sound. It didn't change that much when I removed the surface and applied pad grease, so I just assumed that was the characteristic.
When I wanted to apply a light front brake in DirtSection, this product was able to decelerate delicately, which was a large variable help.
There is no temperature dependence when using it on public roads, and I think it is good that it works well right from the start.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
(Points and hangs for installation/things you should prepare together)
As the installation point or hang, the
To reduce the squeal, chamfer the short side of the pad with an ironworking file.
Apply a thin layer of brake pad grease to the surfaces of the caliper and piston. (Base material) If you apply it on the whole side, Dust will not adhere well.
If the surface of the pad pin is covered with rust or dirt, I use about #400 water-resistance paper and inexpensive lubricant such as Kure 556, etc., and clean it with oil. Then apply a thin layer of pad grease and install.
Use a mild detergent and tooth brush to clean the caliper. Use a mild detergent and toothbrush to clean calipers. ・Parts cleaners that are less aggressive to rubbers should be used only where there is a lot of dirt. (Chain cleaner) Cleaned at
Spray the entire caliper with silicon spray and wipe it with a dustcloth. (Before installing the pad)
You may want to prepare the following items together
Pad grease
Lubricant for oil sharpening
Silicon spray
RubberGrease or Silicon grease (For piston cleaning and wringing out)
Parts cleaner (Chain cleaner)
Scraper (A leather skewer or slotted screwdriver is also acceptable.)
Iron Rasp
Water-resistance Paper
PistonPliers (PistonTool) (For piston cleaning and wringing out)
Pad pin (If the rust is severe and causing bumps)
View detail
Fits: YAMAHA XV1700, YAMAHA XV1700, YAMAHA X-City, YAMAHA X-City 250, YAMAHA X-City 125, YAMAHA WR125X Supermoto, YAMAHA WR125R, YAMAHA Versity., YAMAHA Majesty 125 FA, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, YAMAHA MT-01, VICTORY Vision Tour, VICTORY Vegas, VICTORY Vegas Ness Signature, VICTORY Vegas Jackpot, VICTORY Vegas 8-Ball, VICTORY Vegas 8 Ball, VICTORY Ness Cross Country
I replaced the Pad.
I suddenly see FCaliper.
Brake Pads in F is almost over (LOL)
So, I replaced the Pad.
Vesla's Sintered, which was also put into the NINJA2 Helmet 50R.
Basically, I don't use Brake very much (laughs).
We don't need METAL.
But. rather than a Pad replacement.
Caliper cleaning is Main (LOL)
And the wind is getting stronger (laughs).
I managed to clean it using Wire brush, oil wash and Brush.
Grease the Piston, Slide pin and the back of the Pad and assemble.
In. On the way back, I was narrating. It's still a good effect.
Reliability Outclassing.
View detail
Fits: HONDA CRF450R, HONDA CRF250X, HONDA CRF250R, YAMAHA YZ125, YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ250, YAMAHA WR250R, YAMAHA WR250F, SUZUKI DJEBEL250, SUZUKI DJEBEL250 XC, SUZUKI RMX250, SUZUKI RMX250S, SUZUKI RM-Z450, SUZUKI RM-Z450, SUZUKI RM-Z450, YAMAHA WR426F, YAMAHA WR450F
It doesn't feel right!
Used for 07WR250F
I was a little worried because it was cheaper than OEM, but I was pleasantly surprised with the Snap and Fee Ring! The front end was much easier to work on than the rear end, and I also did some grease up and brake fluid changes.
I don't know about durability because I'm just getting started.
View detail
Fits: HONDA hurricane, HONDA XL1000V Varadero, HONDA ST1100 A, HONDA ST1100, YAMAHA ROADSTER WARRIOR, YAMAHA R100 ROADSTER, YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300 TOUR CLASSIC, YAMAHA ZEAL, YAMAHA YZF750SP, YAMAHA YZF600R, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400S, YAMAHA XJ600S
It's not as noticeable on a car with Cowl, though.
I bought the Filter in Red color, which is not so noticeable on the car with Cowl. the size is the same as the Black one, and the performance is probably the same. The size is the same as the Black one and the performance is probably the same. View detail
Fits: HONDA hurricane, HONDA XL1000V Varadero, HONDA ST1100, HONDA ST1100 A, HONDA VFR400R, YAMAHA FZR400RR SP, HONDA CB1300SF, YAMAHA R100 ROADSTER, YAMAHA ROADSTER WARRIOR, YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300 TOUR CLASSIC, YAMAHA ZEAL, YAMAHA YZF750SP, YAMAHA YZF600R, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1
(it's) the same with everything
[How is it used?
I recently purchased a ZX-7R, but I don't know when I last changed the oil, and I don't feel good when I shift, so I decided to change the oil and bought the oil at the same time.
Was the one you received as per Image?
It is as per Image. It is possible to buy it at a mass merchandiser, but it is annoying to go there, so I always buy it at Webike. I always buy from Webike.
Was the installation difficult?
Just take it off and put it on with CupWrench.
I sometimes touch the car which is closed with demon torque, but Oil Filter is OK with hand-tightened level torque, so I installed it with moderate hand torque.
How was your experience with it?
Is it possible to break the Filter without changing it? I think it's just a good luck charm.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly. I have no expectations.
Other items that would be helpful
When CupWrench does not come off, it is likely to come off by putting force in the direction of loosening once.
View detail
Fits: YAMAHA YFM660FH, YAMAHA YFM660FH, YAMAHA YFM660FH, YAMAHA YFM660FAHD, YAMAHA YFM660FAH, YAMAHA YFM660F, YAMAHA YFM5FGPSE, YAMAHA YFM5FGPH, YAMAHA YFM5FGPH, Others Ranger 500 2X4, Others Ranger 4x4 400, Others Ranger 400, Others Ranger 400, YAMAHA YFM5FGP, YAMAHA YFM5FGP, YAMAHA YFM5FGH, YAMAHA YFM5FGH, YAMAHA YFM5FG, YAMAHA YFM5FG, YAMAHA YFM550PH
If you're replacing it at the right distance, it's normal.
[How is it used?
I change Oil in Ninja400 every 3000km and change Element once for every 2 Oil change. also change after using Gasoline additive etc.
How was your experience with it?
The filter area is smaller than OEM, but if you change the element at the right distance, you can use it without any problem. I think that OEM Element has more filter area to prevent trouble even if you don't change Element.
How did it compare to other products?
It's easier to get it at actual stores than OEM, so it's something that's convenient.
[Points to note]
To keep the engine in good condition, it is more important to change the oil at the right distance than to use good oil or good filter.
View detail
Fits: HONDA ST1100 A, HONDA XL1000V VARADERO, HONDA HURRICANE, HONDA ST1100, HONDA Shadow slasher750, HONDA SHADOWCustom, HONDA Shadow classical, HONDA CB400 SB, HONDA CB400F, HONDA CB400 SE, HONDA GOLD WINGSE, HONDA GOLD WINGF6B, HONDA GOLD WINGF6C, HONDA GOLD WING, HONDA Integra, HONDA Integra, HONDA Africa Twin, HONDA Integra S, HONDA Africa Twin, HONDA XRV650J
Shit
I need it immediately, but I have to wait 1 month after payment... I can't cancel it even if I want to cancel it immediately.
I'm not rating the product, I'm rating webike!
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Resistant to rust
Rust resistant Material:Stainless SteelPad pin。
It is a little bit longer for one push for Caliper, but it can be used as it is with OEM and replacement.
Features easy maintenance and performance retention, but hard Material:The surface of the shaft that touches the pad is flattened a little.
It doesn't feel like it's deforming more and more, but it doesn't feel good because I never had this happen with OEM Parts. But OEM parts will rust....
I give it 3 stars because it is rust proof and I haven't had any Trouble.
I think the price is high compared to the quality.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB600F, HONDA CB750F, HONDA CBR1000F, HONDA CBR1100XX Super Blackbird, HONDA CBR250R (2011-), HONDA CBR250R (MC17/19), HONDA CBR250R (MC17/19), HONDA CBR400R, HONDA CBR400R, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR600RR, HONDA CBR600RR, HONDA CBR600RR
It's safer to change it.
The OEM Bleeder Bolt is always going to Rust and Decay, so this Material:It is safer to replace it with Stainless Steel.
Be sure to bleed the air and refill the fluid in the MASTER after replacement.
The Bleeder Cap was made by Straight.
View detail
Fits: HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
I put it on my ZrX1200 DAEG.
ZrX1200 DAEG OEMHydraulic Clutch Bleeder Bolt This Material:I replaced it with a Stainless Steel one. The OEM Bleeder Bolt is made of steel and will always rust over time, so it's best to replace it. Don't forget to bleed the air and refill the fluid in the MASTER after replacement. View detail
Fits: HONDA FT400, HONDA CX-EURO 400, HONDA CBX750F HORIZON, HONDA CBX750F BOLD'OR, HONDA CBX750F BOLD'OR, HONDA CBX400 CUSTOM, HONDA CBX1000, HONDA CBR750 SUPER AERO, HONDA CBR1000F, HONDA CB750F, HONDA CB750F, HONDA CB250N SUPER HAWK, HONDA CB1000F, HONDA XLV750R, HONDA XL600R PHARAOH, HONDA VF750F, HONDA VFR750F, HONDA VF750F, HONDA VF750 SABRE, HONDA VF750 MAGNA
Used for NS250F
The NS has the same front and rear Caliper, but the Pad thickness is different after.
The Pad is thick enough to handle it.
I don't know how well the pad works because it was done at the same time as fixing the slide pin sticking.
It works properly.
View detail
Fits: YAMAHA YZF750, YAMAHA YZF750, YAMAHA XV1900, YAMAHA XV1900, YAMAHA XJ600, YAMAHA XJ600, YAMAHA FZR750, YAMAHA FZR600, KAWASAKI ZXR750, KAWASAKI ER-5, HONDA VFR750, HONDA VFR750, HONDA VFR750, HONDA ST1100, HONDA CBF500, HONDA CB600, HONDA CB400RR, YAMAHA YZF-R6, YAMAHA YZF-R46, YAMAHA YZF-R1
It works better than you can imagine.
I ride a ZX-9R F-type.
The only reason I bought it was that it was a hassle to buy the Oil Element every time I needed to change the Oil, so I didn't expect anything from the Others.
I switched from the regular Element to this one and the engine started to blow up lighter.
It is thought to be because the resistance to the oil pump is small.
In Others, the water temperature dropped by 3 degrees.
This is because the heat radiation of Element itself is high, and the temperature of Oil has decreased, and the water temperature rise of 9R which has the water temperature type Oil cooler is suppressed.
As for the dustproof performance of the Filter, it is difficult to see a clear replacement, but when the Filter part is dipped in kerosene, a certain amount of dirt comes to the surface, so I think it has a certain performance.
I think that many people will change the oil in less than 3000km, so even without the dustproof performance, if you look at the effect of the amount of oil inflow, the reduction of resistance, the suppression of oil temperature rise, etc., I feel that it is a very reasonable product in terms of vehicle protection.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
easy mark
Used for KLX125
Compared to the OEM, the screw mountain part looked smaller, but I was able to install it without any problems.
It's just the right length without the excess length that other people have mentioned.
The rest depends on how rusty it is and how fast it wears out.
At any rate, it is worth using this kind of Parts supply because it is very nice!
View detail
Fits: HONDA hurricane, HONDA XL1000V Varadero, HONDA ST1100, HONDA ST1100 A, HONDA VFR400R, YAMAHA FZR400RR SP, HONDA CB1300SF, YAMAHA R100 ROADSTER, YAMAHA ROADSTER WARRIOR, YAMAHA ROYALSTAR1300, YAMAHA ROYALSTAR1300 TOUR CLASSIC, YAMAHA ZEAL, YAMAHA YZF750SP, YAMAHA YZF600R, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF-R7, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1
Stable DAYTONA
I use it for XJR400R.
It is easy not to have to buy Packing separately because of the Type which is Cartridge Type and Rubber packing is included.
I haven't used any other oil filters so I can't compare them, but I have had no problems with fitting to the car body or the filter wrench, and the engine runs perfectly fine after the change.
It's a classic Filter, so there's no need to hesitate.
View detail
Fits: HONDA XR100, HONDA XR100, HONDA XR50, HONDA XR50, YAMAHA FZ-6S, YAMAHA Lanza., YAMAHA Lanza., YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA TT250R Raid, YAMAHA TT250R Raid, YAMAHA TT250R, YAMAHA TT250R, YAMAHA MT-07, YAMAHA MT-09, YAMAHA YZ250, YAMAHA YZ125, YAMAHA XT225 CELLOW WE, YAMAHA XT225 CELLOW, YAMAHA XJ6S
Used on D Tracker 125 rear caliper
It's just to keep it from rusting and to see if it will move better. The quality is good, so there is no problem. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
If you want to replace the plug, this is the one.
I always change the plug at about 3000k, but this Iridium plugs makes less ignition error, and when I change the oil at the same time, the engine sound becomes stable and a little quiet. View detail
Fits: HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA AX-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB-1, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F
good
It's a little bit expensive, but I think it's not a bad idea to change it because it's a part where corrosion is a concern. It is my personal impression that the dress-up effect is not so hopeful to be honest.
I bought it more for corrosion protection, so I'm happy with it.
View detail
Fits: KAWASAKI EPSILON250, YAMAHA XMAX, YAMAHA TMAX 560, YAMAHA TMAX 530, HONDA FUSION SE, HONDA FUSION, HONDA FUSION, HONDA FORESIGHT, HONDA Silver wing, HONDA INTEGRA, HONDA X-ADV, HONDA INTEGRA, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE400 burgman, SUZUKI SKYWAVE650 burgman, SUZUKI SKYWAVE650 burgman, YAMAHA GRAND MAJESTY250, YAMAHA MAJESTYS, YAMAHA MAJESTY, YAMAHA MAJESTYC
Size with room to spare
I use it as Cover for PIAGGIOMP3.
Not only is the vehicle large in size, but despite the special shape of the two-wheeled front, there is enough room to cover the entire motorcycle, making it easy to remove.
Includes Cover storage case and repair cloth. (with adhesive side) It is equipped with a "Mere Old Man" and is safe in case of emergency.
View detail
Fits: APRILIA RSV4 R FACTORY, APRILIA RSV4 R APRC, APRILIA RSV4 R, KAWASAKI Z1000, KAWASAKI VERSYS 1000 SE, KAWASAKI Ninja1000SX, KAWASAKI Ninja H2, SUZUKI V-STROM650XT, SUZUKI V-STROM650, SUZUKI V-STROM1050XT, SUZUKI V-STROM1050, SUZUKI KATANA, HONDA VFR400Z, HONDA VFR400R, HONDA STEED400 VSE, HONDA STEED400 VLX, HONDA STEED400 VCL, HONDA SHADOW600, HONDA CBR1000RR-R FIREBRADE SP, HONDA CBR1000RR-R FIREBRADE
Reasonable price, authentic DID
I can’t find this accessory around, all of which are only buckle type, no rivet type. I didn’t expect to find it on the webike. The price is very reasonable and the freight is cheap. It just works when installed, and it is suitable for the chain of DID525ZVM-X-- -------------------------------------------- I can't find this accessory around, I only have a buckle, there is no rivet type, I can't think of it in Webike, the price is still very reasonable, the freight is also cheap, it is just the use of DID525ZVM-X Powered by Google Translator View detail