Reviews
Fits: APRILIA SHIVER 750, APRILIA SRV850, BMW C650 Sport, DUCATI MONSTER 1100, DUCATI MONSTER696, DUCATI MONSTER796, HONDA CBF1000, HONDA CBF500, HONDA CBF600 N, HONDA CBF600S, HONDA CBR600F, HONDA CRF1000L Africa Twin, HONDA CRF1000L Africa Twin, HONDA VFR1200F, HONDA VFR800, HONDA VFR800, HONDA VFR800F, KAWASAKI ER-6f, KAWASAKI ER-6f, KAWASAKI ER-6n
Proven and good looking.
I think it's a little expensive, though.
I personally think it's the best looking of the Monokey base.
Installation itself is very easy.
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Easy to see the effect when installed at the same time as Oil replacement
Purchased for the claimed Power and Torque up.
This one has not been effective so far.
What I realized most after the installation and oil replacement at the same time was the improvement in operability.
The familiar doldrums that occur at low speeds are considerably reduced.
The acceleration startup became more straightforward, but this may be due to the Oil.
I would like to continue to monitor the condition closely, but it seems like a change that cannot be noticed unless you ride with an eye on the quality of your driving.
The quality of the product itself is very good and it looks great as a color accent for your feet.
However, it is expensive, or rather too expensive, as a Cost to Filter.
O Ring is required for each replacement, so you need to prepare S1-compatible Rings each time you use a spare 1 pc.
It is for people who want to try various things on their Motorcycle rather than cosmetics.
The same product is available even without this MORIWAKI collaboration, and while it is possible to make a recommendation in terms of self-sufficiency, it depends on the person whether it is necessary or not.
View detail
Fits: HONDA CB400SF, HONDA CB400SB, YAMAHA TMAX, YAMAHA XVS250, YAMAHA XMAX250, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX12, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VMAX, YAMAHA VIRAGO1100, YAMAHA VMAX, YAMAHA MAJESTY250, YAMAHA SR500, YAMAHA TW 200E, YAMAHA TW 200, SUZUKI V-STROM 650, SUZUKI SV650
If you feel up to it, why not give it a try?
OEM Product has deteriorated somewhat and was replaced.
It is really just a fashionable color. It has nothing to do with driving performance.
However, I think it is also important to pay attention to such details as a hobby.
View detail
Fits: HONDA 400X, HONDA AfrIca TwIn, HONDA BROS I (NT650), HONDA BROS II(NT400), HONDA CB-1, HONDA CB-1 II, HONDA CB1000R, HONDA CB1000SF, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300DC X-4, HONDA CB1300SF, HONDA CB1300SB, HONDA CB400F, HONDA CB400Four, HONDA CB400SB, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
For self-satisfaction.
I had about 4 Oil Filters as spares, so I could use the Oil Filters I had for the next 4 years.
I was very confused when I came to purchase the product.
I was wondering if the Gold amount is the same as replacing the CartridgeOil Filter 30+ times for the Gold amount.
However, I was excited and told myself that Engine oil flow is good without Garbage.
Since the purchase, MORIWAKI's Mark and colors have increased my satisfaction.
I also felt a little self-loathing because my motorcycle is a Rebel, so I don't turn it at high rpm, and I was later convinced that the oil fluidity had nothing to do with it.
I still have a CartridgeOil Filter and am considering whether to use it or not.
The sense of ownership is perfect.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Pretty good
It is not too flimsy and seems to be reasonably durable.
There are holes in the front and back for a chain lock and a belt stopper underneath,
I think the cospa is one of the better ones.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
Slightly Larger
I bought this product because the Motorcycle Cover I bought at 2 Rinkan had a small hole in it due to deterioration within a year. It is completely outdoors without a roof. The environment is harsh because it is exposed to the wind.
I put this product on xr as it is, but it is a little Large size. It is a little too large. The total length is 220, so it is between L and LL.
The flapping and scratching were a concern, so I doubled up the Motorcycle Cover I had been using and put it on the bottom, which made things a little better.
The quality and functionality are good, and the price is reasonable, so if it lasts a year, it's good enough.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
Over 20 years of use
We have been using it for over 20 years and have never had a Trouble.
There is an Overhaul opportunity for Engine,
I also had the person who asked me to do the work check the Cylinder,
There were no abnormalities at all.
View detail
Fits: HONDA VTX1800T, HONDA VTX1800N, HONDA VTX1800F, HONDA VTX1800C, HONDA VTX1300T, HONDA VTX1300R, HONDA VTX1300C, HONDA VT750SD, HONDA VT750SA, HONDA VT750S, HONDA VT400S, HONDA VT1300CX, HONDA VT1300CTA, HONDA VT1300CT, HONDA VT1300CS, HONDA VT1300CR, HONDA VFR800FD, HONDA VFR800F, HONDA SW-T 400, HONDA ST1300PA
It feels good to change it.
It is compatible with OEM, so there is no problem at all in use and installation.
It is not expensive, so we replace it with each Oil change, although it does require the time and effort to remove the Filter.
It may be a little overprotective, but …….
However, it would be helpful to change it so I can feel good about my ride and get it at a reasonable price.
View detail
Fits: HONDA Super Cub 110, HONDA Cross Cub 110, HONDA GB350 S, HONDA MONKEY125, HONDA Super Cub C125, HONDA NC700S, HONDA NC700S Dual Cluth, HONDA NC700X, HONDA GB350, HONDA NC700X TypeLD DCT, HONDA NC700X Dual Cluth, HONDA INTEGRA, HONDA NC700D, HONDA X-ADV, HONDA NM4-02, HONDA NM4-01, HONDA NC750X TypeLD DCT EP, HONDA NC750X TypeLD DCT EP, HONDA NC750X DCT EP, HONDA NC750X DCT EP
Replacement purchased with KITACOOil pump
It has been about 2 months since I installed it, and I replaced it with a KITACOOil pump, so I am not sure of the effect, but I replaced it hoping that it would reduce the resistance of the oil flow.
But with you all, it's expensive anyway.
Therefore, we have set the cospa to 1.
However, I feel that the quality construction is good.
The nameValue in collaboration with MORIWAKI is also a factor in the high price.
I can recommend it, but it would be for those who can tolerate the incidental effects and cosmetic costs.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
good heated grip
Second time use kijima heated grip. I used gh08 last time and this time gh10. It is quite easy for install and internal switch makes handle bar clean. Highly recommend this heated grip. View detail
Fits: HONDA 400X, HONDA 400X, HONDA CB250R, HONDA CBR250RR, HONDA CBR400R, HONDA CRF250M, HONDA CRF450L, HONDA CRF450RX, HONDA REBEL(REBEL)500, YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZ250X, YAMAHA YZF-R25, YAMAHA YZF-R3, SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650, SUZUKI SV650X, SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Joint link in Chain
I bought RossiMODEL's Chain, but only LINK was fluorescent yellow color, so I bought Silver color as same as other LINK.
I haven't put it on yet, but I think it will be a calming color scheme.
View detail
Fits: HONDA little cub, HONDA monkey, HONDA Forza Z ABS, HONDA Forza Z ABS, HONDA dunk, HONDA Super Cub 50, HONDA gyro canopy, HONDA X-ADV, HONDA VTR-F, HONDA VTR250, HONDA VFR800F, HONDA PCX150, HONDA PCX125, HONDA NM4-02, HONDA NM4-01, HONDA NC750X, HONDA NC750S, HONDA CTX700N, HONDA CTX700, HONDA CTX1300
For peace of mind
I installed it on a Spur CUB110. Instruction Manual was included after installation, but
There is no Instruction Manual on how to wire. I had a little trouble, but I was able to install it.
I think you should take it easy and let Shop handle it.
Attachment is required for installation.
It is easy to use, just turn off the key and it will beep one minute later! A minute later, it will beep!
With the key ON
Release. I think it's safe to leave Motorcycle for a bit.
View detail
Fits: BMW K1300 S, BMW F800 S, BMW K1300 R, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA XSR900, YAMAHA YZF-R1, YAMAHA YZF-R250, YAMAHA YZF-R3, YAMAHA YZF-R6, HONDA CBR650 F, HONDA CTX700, HONDA CTX700 N, HONDA NC700 S, HONDA NC700 X, HONDA NC750 X, HONDA NC750 S, HONDA PS250, HONDA VARADERO 125, HONDA VFR1200 F
MCP High Spec Bike Cover "Bike Guard" LL
MCP High Spec Bike Cover "Bike Guard" LL I bought this to prevent the pranks, and when I didn't put the Cover on, I was quite annoyed. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Purchased as Base for Smartphone Holder
I purchased two of these as a base for my Smartphone Holder, Gopro, and MINI TaBrett. They are easy to install, but you will need a Hexagonal Wrench, which is not included in the package. The only drawback is that the shortest bolt is too long, and the material of the bolt is not indicated. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Discreet and easy to remove and install RAM Holder
Yamaha Bolt R-Spec, this mount is attached to the position above the Handlebar ClampLeft with the supplied M8.
RAM Holder can be easily detached and attached.
Quantity Holder a little outwardly.:If set, it will not interfere with the Meter.
Where the limited space of the Handlebar does not have to be sacrificed for Mount,
Also, when the Holder is removed, this Mount should be unobtrusive.
Quantity the phone:It is useful when I ride with Set.
I used the same RAMBase on another motorcycle for about 3 years and got a small crack on the round-headed rubber.
I guess it depends on the frequency of use and the environment in which the Motorcycle is stored, but at this price, it makes sense.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1M, HONDA 400X, HONDA CB1300 BOLD'OR, HONDA CB1300 SP, HONDA CB1300SF, HONDA CB400F, HONDA CB500F, HONDA CB650F, HONDA CB900 HORNET, HONDA CBF1000, HONDA CBF500, HONDA CBF600N, HONDA CBF600S, HONDA CBR1100XX, HONDA CBR400R
520 for Conversion on the 2021 MT-09SP.
The Chain on my 2021 MT-09SP rusted due to forgetting to apply lube after cleaning, so I used this Sprocket as a 520 for Conversion while replacing it.
When selecting the rear sprocket, I thought that the Duralumin sprocket might wear out faster, so I also purchased the RACINGSteel, which seems to be more durable, but the Duralumin sprocket weighed about 310g and the RACINGSteel weighed about 870g, which was unexpectedly heavy. The RACINGSteel is heavier, and I thought that the Duralumin product would be better for the MT-09, which is characterized by its light handling, so I installed the RACINGSteel here.
If the Duralumin is worn out too quickly, I will replace it with RACINGSteel.
Installation is not particularly difficult, but there are holes at the same intervals next to the mounting holes, so if you want to install it, you can use these holes as well, so be careful when working in a dark place.
*I had seen on someone's blog that they had actually left marks where they had been installed incorrectly, so I thought no way, but I was about to actually do it when the sun went down on Blue Sky Garage.
After the installation, the synergistic effect of the front and rear Sprocket and 520 Chain was felt as the friction was reduced and the weight was lightened.
Specifically, when braking at low speeds with embracing the brakes, the car seems to move forward more than expected.
Also, when going uphill, I used to feel a little uneasy unless I was in 3rd gear, but now I feel like I can go uphill in 4th gear.
Unless you are a long distance runner or the latest SUPER SPORTS750 with 200 hp over, etc., I thought the Merit of lightness was Large, as the Duralumin product would hold up well there.
View detail
Fits: HONDA CB500X, YAMAHA YZF-R6, YAMAHA YZF-R3, YAMAHA YZF-R1, YAMAHA XSR900, YAMAHA XJR400 R, YAMAHA XJR1300 L, YAMAHA XJR1300, YAMAHA XJ6 Diversion, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-01, YAMAHA FZ-1 FAZER, YAMAHA FZ-1, YAMAHA FJR1300 AS, YAMAHA FJR1300 A, YAMAHA FJR1300, TRIUMPH BONNEVILLE, TRIUMPH TIGER 800 XRX, SUZUKI BANDIT 1250 S
It is a little Large size.
It's a Large tightening for the Ninja 400cc. View detail
Fits: DUCATI SCRAMBLER(800), HONDA CB1000R, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB125R, HONDA CB1300F, HONDA CB150R, HONDA CB250R, HONDA CB400SB, HONDA CB400SS, HONDA CB750, HONDA CRF1000L Africa Twin, HONDA CRF250L, HONDA CRF250RALLY, HONDA CTX700, HONDA DN-01, HONDA GB250, HONDA GROM, HONDA GROM
Ideal for mounting Pipe Handlebar
If you are installing a RAM Mount on a Pipe Handlebar body, this M8BaseBolt is the perfect replacement for the Handlebar Clamp Bolt.
There is no need to worry about mounting gapping due to vibration. The M8BaseBolt can be mounted on a handlebar clamp, so there is no need to worry about space limitations.
View detail
Fits: HONDA Super Cub 110, HONDA Cross Cub 110, HONDA GB350 S, HONDA MONKEY125, HONDA Super Cub C125, HONDA NC700S, HONDA NC700S Dual Cluth, HONDA NC700X, HONDA GB350, HONDA NC700X TypeLD DCT, HONDA NC700X Dual Cluth, HONDA INTEGRA, HONDA NC700D, HONDA X-ADV, HONDA NM4-02, HONDA NM4-01, HONDA NC750X TypeLD DCT EP, HONDA NC750X TypeLD DCT EP, HONDA NC750X DCT EP, HONDA NC750X DCT EP
Nice try... I manage to get there, though.
I bought this to put on my ct125 JA65 which is the same model engine as the grom and monkey125. At first glance it looks like it will fit, but the rubber packing is thicker than OEM, so the lid will not close.
We are temporarily replacing it with OEMRubber packing and see how it goes.
View detail
Fits: HONDA CBR500R, HONDA CB500X, HONDA CB500F, YAMAHA YZF-R6, YAMAHA YZF-R1, HONDA Shadow slasher400, HONDA SHADOW400, HONDA VT400S, HONDA NM4-02, HONDA NM4-01, HONDA NC750S, HONDA NC750S, HONDA NC700X, HONDA NC700X, HONDA NC700X, HONDA NC700S, HONDA INTEGRA DCT(for International Model), HONDA CTX700N DualClutchTransmission, HONDA CTX700N, HONDA CTX700
Manufacturer shipping error?
The texture was good.
The quality was just right, with no BALI and not too much beveling.
…… but the mounting holes etc. are different no matter how I look at it.
I thought it would be good, but I am very disappointed.
View detail