Reviews
Stable Standard Plug BP5HA
[How is it used?
I thought it was time to replace it in terms of distance, so I ventured to purchase Standard Plug BP5HA this time.
How was your experience with it?
I have a feeling that the fee ring is better than before.
How did it compare to other products?
So far, the same NGK Iridium plugs have been selected.
I have recently been concerned about misfirea from the Exhaust System.
After replacing it with Standard Plug BP5HA, the misfirea was drastically reduced.
[Points to note]
Is Standard Plug BP5HA good for Normal engine?
It is important to clean the area around the plug hole before replacement work.
View detail
NGKWindshield IRIDIUMSpark plug
I think the texture is good and the cosmetics are good. View detail
Uotani and Quantity:Exchange in Set
It was replaced along with the cord and Cap when the Uotani was installed.
Iridium plugs do not require Gap adjustment, but were adjusted to 1.2mm for the Uotani installation.
It might be interesting to compare it with the Normal plug, although I haven't done it yet.
View detail
Made by Windshield IRIDIUM, which I have been using for about 20 years now.
Iridium plugs have been a favorite of ours since their appearance.
I am not dissatisfied with the performance of the Standard Plug BP5HA, but I use it as a talisman because it makes a difference when I have a Large fuel consumption problem in a Carburetor car (extremely cold mornings, or when going downhill on a long slope with almost no throttle).
I have never felt the Power up or Torque up as described by Manufacturer.
But with the Standard Plug BP5HA, it keeps igniting well (I think) even in a situation where it could have possibly lost fire, so I have been buying it for lightly 20 years now.
In particular, LargeEngine Displacement Volume TWIN and Single engines are prone to fuel mixture collapse except at full throttle (a different story from the carburetor setting), so the peace of mind that ignition is solid even in situations where the air-fuel ratio is clearly not correct is irreplaceable.
Windshield IRIDIUM was originally made by Denso, but I had a bad experience with them in the past, so I use NGK products.
I guess Denso products are already Large sturdy now, though.
Replacement time is Whenever I feel like it." It is
When I remove it and look at the electrodes, nothing has changed, so I could use it forever if I wanted to. It seems as if it could be used forever if it wanted to.
Plug replacement is one thing, but a clean plug hole is even more important, so we put a tap through the plug hole to remove carbon without having to replace the plug.
If the plug hole cannot be easily screwed in by hand to the end, it is a sign that Carbon has accumulated in the plug hole.
If Windshield IRIDIUM is the way to go, at least Plug should be able to turn round and round by hand to the end!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
Installation on xjr1200
I am not sure.
But I feel like I'm getting stronger!
View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
First DensoPlug
NGK had always been the supplier, so I replaced it with NGK for a trial.
It is not something that can be felt, but I think the starting performance is good.
We believe that Premium components have an added peace of mind fee that regular products do not have, so those who think they are Waste should not buy them.
I like the fact that Gap management is not required.
View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
Batch!
It's helpful because I don't have to search for part numbers myself. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
This is the first time I have chosen DENSO.
I have been using NGK for a long time, but this is the first time I tried DENSO.
The advantage of Iridium plugs is that they do not require Gap Management, so they can be installed right out of the box.
Plugs are consumables, so we were not stingy in replacing them.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
NGK Iridium Spark Plugs for Honda CBX125 1993
A friend wanted an iridium plug for their CBX125 and Webike was the place to get it. This was easy to find using the tools provided by Webike and all the links to the manufacturers websites. They had previously had an iridium installed and wanted to keep to the one they are used to. Ordered along with other parts so the shipping was good too. Arrived with no faults or issues. The outer box had been sealed with extra tape to ensure, nothing could fall out or escape during transit. Any empty space was filled with air pockets and bubble wrap so nothing could move too much and damage other more delicate parts in the box. The plug arrived in 100% perfect condition. Fired on test and then fitted to the bike. This now makes the bike run as it should and no more bogging down and getting misfires. Very pleased with the result from this plug change. Thank you Webike View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
NGK Standard Plug Installed On TW200
I'm currently using NGK DPR7EA PLUG ON MY TW200 AND It's well over the 6000km stiil going strong never had a problem with that. This DPR8EA PLUG LOOK THE SAME AS DPR7EA.THREAD DIAMETER,LENGHT AND 18MM SOCKET WILL FIT. I also wanted to buy DPR7EA Plugs but no luck because out of the stock and I look through the webike found this NGK DPR8EA plug exactly same.I checked the spark plug gap with my feeler gauge it says 0.80mm.According to the tw200 service manual spark plug gap should be between 0.6mm to 0.7mm.So I use my small hammer to decrease the spark plug gap .tap it until meets the correct gap and it won't take more force.Need to be adjusted bend the ground electrode carefully.Installation is so easy .all you need is 18mm spark plug socket to remove the old plug and thread in the spark plug by hand then tighten the spark plug to specification with an 18mm spark plug socket.The Package received very quickly after dispatch from japan took only 4days to reach my home town.Thank you so much webike for the high quality packaging and service.I highly recommended .webike shop is the only one shop you could get parts for reasonable prices.The only place where you can buy products at a much lower price than other shops.I'm giving 5stars View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
OEM designation is sufficient
The price is low, so I replace it regularly. View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
Universal
Windshield IRIDIUM is hard to re-ignite when covered, so this is still good View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
The usual reassurance
Windshield IRIDIUM is a replacement for Standard Plug BP5HA.
I wasn't dissatisfied with the Omotehito Plug, but I thought that it might be OK to spend a little more for a better spark. It is not something that needs to be replaced that often, so I decided to convert it to Windshield IRIDIUM.
Nothing special to say as the replacement is just removing the plug of the thing and replacing it.
People who fail at this will fail anyway, no matter what they do.
Before removing the plugs, we need to check the plug holes for air blow, plug caps and plug cords, check the burn and wear of the removed plugs, and remove any carbon that may be attached to the plug holes. It's what you do." The thing of.
You must be able to twist Round and round to the end by hand.
PlugGap remains the standard designation.
Since the ignition Coil is OEM, it does not expand the Gap just because it is a Windshield IRIDIUM.
How it feels to use it. No change. It is
If I had to say something, I would say that the Torque seems to increase slightly when the engine is driven in a way that repeats full-closing and half-opening in the mid-speed range, but this is probably a side effect of the ignition of the air mixture, which had been misfiring.
I don't think it is something to replace for power up or torque up, but I guess it has that effect.
Standard Plug BP5HA has been driven more than 50,000km with no maintenance, but the terminals have not been visibly reduced and remained in good condition until the end.
This should be the same when replaced with Windshield IRIDIUM.
If you have a severe setting like 2ndRacer, the plug is a consumable item and will probably be replaced by VANVAN, but if you drive a 4st production car on the street, it will not be replaced frequently, so I think it is better to replace the plug with a windshield IRIDIUM if you are going to replace it anyway. I think it is a good idea to replace it with a windshield IRIDIUM.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
Use with Ootani Coil
[How is it used?
Model used:FTR223
Applications:Street riding, Touring, Circuit
Period of use:About 3 years or so
Number of bottles used:About 4 Repeat purchases
Was the one you received as per Image?
As you can see in the image, the electrode is thicker than the one made by Denso, so I felt I could use it with the Votani Coil.
Was the installation difficult?
As long as you have a plug wrench, you should be able to do it without any problem if you are careful about the angle when tightening. There was no need to remove the tank.
How was your experience with it?
As mentioned in the Title, I will describe my impressions of using it with the Uotani Coil.
First of all, I was able to run with no trouble with the Utani Coil for the duration of its use. The electrode melted and I could not run. This was not the case.
The Iridium plugs themselves are good, as they are used in conjunction with the Utani Coil, but the start-up was very good, and the torque feeling was Large.
The Iridium plugs were excellent in terms of starting and torque, but once the electrodes got dirty from getting covered up, starting became extremely difficult, so I think the Standard Plug BP5HA would be a better choice for car bodies that use Watani Coil and tend to get covered up.
The Life had been replaced with a new one between 5,000km and 6,000km, as the Torque feeling changes after about 5,000km.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Point and hang of installation
Anti-seizure agent on the screw part of the Plug (Anti-seeds、CopperCompoundetc.) can be applied to prevent it from becoming a Trouble the next time it is replaced.
I've been doing it that way for more than a decade, and I've never had a problem with the plug burning off.
Also, it's not enough to tighten the plug as hard as you can, so read the product description carefully and do the work.
View detail
Fits: HONDA FT400, HONDA CX-EURO 400, HONDA CBX750F HORIZON, HONDA CBX750F BOLD'OR, HONDA CBX750F BOLD'OR, HONDA CBX400 CUSTOM, HONDA CBX1000, HONDA CBR750 SUPER AERO, HONDA CBR1000F, HONDA CB750F, HONDA CB750F, HONDA CB250N SUPER HAWK, HONDA CB1000F, HONDA XLV750R, HONDA XL600R PHARAOH, HONDA VF750F, HONDA VFR750F, HONDA VF750F, HONDA VF750 SABRE, HONDA VF750 MAGNA
Used for NS250F
The NS has the same front and rear Caliper, but the Pad thickness is different after.
The Pad is thick enough to handle it.
I don't know how well the pad works because it was done at the same time as fixing the slide pin sticking.
It works properly.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
If you want to replace the plug, this is the one.
I always change the plug at about 3000k, but this Iridium plugs makes less ignition error, and when I change the oil at the same time, the engine sound becomes stable and a little quiet. View detail
Fits: HONDA CBR750F, HONDA FX650 Vigor, HONDA XL400V, HONDA XL650V Transalp, HONDA Gold Wing Aspen Cade, HONDA doo-building, HONDA Phantom 200, HONDA Bross Products 1, HONDA Bross Products 2, HONDA Valkyrie Tourer, HONDA valkyrie, HONDA Valkyrie Interstates, HONDA valkyrie tourer, KAWASAKI Bayou 400, SUZUKI LS650P, SUZUKI VS800, SUZUKI VS800GL, YAMAHA TT600R, YAMAHA XT600E, YAMAHA Royal Star Venture
I'm glad we have it in stock.
Home center and the local motorcycle supply store didn't have it in stock and I was in a bind.
I replaced the worn plug and it seems to start better.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200/R, YAMAHA XJ600, YAMAHA VMAX, YAMAHA VMAX, YAMAHA TT600R, YAMAHA TRX850, YAMAHA TDM900, YAMAHA TDM850, YAMAHA SZR660, YAMAHA TDM850, YAMAHA STRATOLINER DELUXE, YAMAHA SRX600, YAMAHA SRX600, YAMAHA SRX400, YAMAHA GTS1000/A, YAMAHA GRIZZLY660, YAMAHA FZX750, YAMAHA FZ750, YAMAHA FZR750
I'll take the Windshield IRIDIUM for now.
[How is it used?
It was used in the delivery maintenance of XJR1300C. Because the plug which was attached in the first place was rusty, it is exchange.
Basically, it's a touring machine, and I don't plan to ride Circuit.
How was your experience with it?
To be honest, I can't feel the difference between the normal Plug and the Windshield IRIDIUM, but I think the Windshield IRIDIUM has a better flame core and stronger sparks because it's an injection, so I'm feeling powered up (laughs).
How did it compare to other products?
I think it's better than the unmarked NGKPlug! That's all I can say....
[Points to note]
The XJR1300C can be replaced if you float the tank, but it has air ducts on the 2nd and 3rd.
Very hard to replace and irritating (LOL)
You can replace the plug by pulling it by hand. Also, before removing the plug, it is better to wipe the area around the plug with air to remove the garbage.
View detail
Fits: HONDA CB500F, YAMAHA YZF1000 THUNDERACE, YAMAHA YZF1000 R, YAMAHA YP250 S, YAMAHA YP250 A, YAMAHA YP250, YAMAHA YD125 S 89.4, YAMAHA YD125 89.4, YAMAHA XZ400 D 82, YAMAHA XZ400 82, YAMAHA XU1900A (Import), YAMAHA XU1900 CU (Import), YAMAHA XS250 S 82, YAMAHA XS250 82, YAMAHA XJR1300 SP, YAMAHA XJR1300, YAMAHA XJ400 Z-S 80.6-, YAMAHA XJ400 Z-E 80.6-, YAMAHA XJ400 Z 80.6-, YAMAHA XJ400 SP 80.6-
Tough feeling
Previously, other types of iridium plugs were used, but they were replaced using 10,000 km. It is more tough than the previous product, but it feels more compact. View detail
Fits: HONDA NV400CUSTOM/SP, HONDA NV750CUSTOM, HONDA NX650DOMINATOR, HONDA PHANTOM(Reimport), HONDA SL230, HONDA TRANSALP400V, HONDA TRANSALP600V, HONDA V45MAGNA, HONDA VALKYRIE INTERSTATE, HONDA VALKYRIE TOURER GL1500CT, HONDA VALKYRIE/TOURER, HONDA VF400F/INTEGRA, HONDA VF750F, HONDA VF750SAVER・MAGNA, HONDA VFR750F, HONDA VT250F/INTEGRA, HONDA VT250Z, HONDA VT600C/CD SHADOW VLX/DX, HONDA VTZ250H/H-2 1021001~1033408, HONDA WING INTERSTATE
This is a Large cutaway Parts.
Plug is replaced every 2000km with DENSO and NGK Windshield IRIDIUM alternately.
The performance is stable because they are both reliable manufacturers.
I think they are evenly matched in terms of driving performance and fuel economy. Personally, I think you can choose based on the affordability at the time.
In the case of a motorcycle, the RPM is higher than that of a car, and I think that heat is generated accordingly.
I think it's a good idea to replace it regularly with a good one because it's a Large cut Part.
View detail